Progress Lighting P5821-20 1-Light Compact Fluorescent Wall Lantern

1. Khoom Tshajview

The Progress Lighting P5821-20 is a 1-light energy-efficient compact fluorescent wall lantern designed for outdoor use. It features a transitional styling with an antique bronze finish and a matte white acrylic diffuser. This fixture is rated for use in wet locations and complies with California Title-24 requirements, making it suitable for porches, patios, and other exterior wall applications.

This image shows the Progress Lighting P5821-20 1-Light Energy Efficient Compact Fluorescent Wall Lantern in an antique bronze finish, featuring a classic design with a matte white acrylic diffuser.

2. Cov ntaub ntawv kev nyab xeeb

• CEEB TOOM: Tshem tawm lub hwj chim ntawm lub Circuit Court breaker lossis fuse lub thawv ua ntej kev teeb tsa lossis kev pabcuam.
• Txhua qhov kev sib txuas hluav taws xob yuav tsum ua raws li cov cai hauv zos, kab ke, lossis National Electric Code (NEC). Tham nrog tus kws tshaj lij hluav taws xob tsim nyog yog tias koj tsis paub txog kev sib txuas hluav taws xob zoo.
• This product may be subject to California Proposition 65 rules and regulations. For more information, visit www.P65 Qhia rau sawv daws.
• Do not install this fixture in areas where it may be submerged in water. While rated for wet locations, it is not designed for submersion.

3. Cov ntsiab lus ntawm pob

Xyuas kom tseeb tias tag nrho cov khoom muaj nyob ua ntej pib installation:

• 1-Light Wall Lantern (P5821-20)
• Matte White Acrylic Diffuser
• Rugged Aluminium Housing
• Mounting Hardware (typically includes mounting strap, screws, wire nuts)
• Nco tseg: A compact fluorescent light source (bulb) is tsis suav nrog thiab yuav tsum tau muas nyias.

4. Kev teeb tsa thiab kev teeb tsa

Cov cuab yeej yuav tsum tau: Screwdriver, wire strippers, electrical tape, safety glasses.

1. Fais fab tuag: Before starting, ensure the power to the installation area is completely off at the circuit breaker or fuse box.
2. Npaj Wiring: Carefully remove the existing fixture (if any) and expose the electrical wires from the junction box.
3. Txuas Mounting Strap: Secure the provided mounting strap to the junction box using the screws.
4. Ua Kev Txuas Hluav Taws Xob: Connect the fixture's wires to the house wires according to local electrical codes. Typically, connect black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Secure connections with wire nuts and electrical tape.
5. Mount Fixture: Carefully tuck the wires into the junction box and align the fixture with the mounting strap. Secure the fixture to the mounting strap using the provided screws.
6. Nruab Lub Teeb Source: Insert a compatible compact fluorescent bulb (not included) into the fixture's socket. Refer to the specifications for the correct wattage.
7. Rov Qab Fais Fab: Tom qab kev teeb tsa tiav thiab tag nrho cov kev sib txuas tau ruaj ntseg, rov qab lub zog ntawm lub Circuit Court breaker.

Tseem ceeb: Yog tias koj tsis paub meej txog ib feem ntawm cov txheej txheem teeb tsa, sab laj nrog tus kws hluav taws xob tsim nyog.

5. Cov lus qhia ua haujlwm

This wall lantern operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.

• Lub teeb Source: Compact Fluorescent
• Qhov siab tshaj plaws Wattage: 13 Watts

6. Kev tu

• Ntxuav: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
• Hloov qhov muag teev: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new compact fluorescent bulb of the same type and wattage (13 Watts maximum).
• Kev tshuaj xyuas: Tshawb xyuas lub qhov khoom siv tsis tu ncua seb puas muaj cov cim qhia tias puas lawm, puas tsuaj, lossis cov kev sib txuas xoob. Kho cov teeb meem tam sim ntawd.

7. Kev daws teeb meem

If the wall lantern does not operate correctly, perform the following checks:

• Tsis muaj teeb:
  • Xyuas kom tseeb tias lub qhov hloov ntawm phab ntsa nyob rau hauv qhov chaw 'ON'.
  • Check the circuit breaker or fuse for the fixture's circuit. Reset if tripped or replace fuse if blown.
  • Verify the light bulb is securely screwed in and is not burnt out. Replace if necessary.
  • Confirm that all electrical connections are secure and properly wired. (CEEB TOOM: Turn off power before checking wiring.)
• Flickering Teeb:
  • Check for a loose bulb or loose wiring connections.
  • Ensure the bulb is the correct type and wattage rau kev kho mob.

If issues persist after performing these checks, consult a qualified electrician.

8. Cov lus qhia tshwj xeeb

This image illustrates the dimensions of the P5821-20 wall lantern, measuring 8.75 inches in height, 7.25 inches in length, and 5.75 inches in width.

9. Warranty thiab Support

This Progress Lighting product is covered by a 1 xyoo warranty from the date of purchase. For detailed warranty information, please refer to the official warranty document provided by Progress Lighting, which can typically be found on their website or via the link: https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For technical support, replacement parts, or further assistance, please contact Progress Lighting directly. Contact information can usually be found on the manufacturer's website los yog ntawm cov khoom ntim.