Strymon Ola Chorus/Vibrato Instruction Manual

Taw qhia

The Strymon Ola is a high-performance digital chorus and vibrato effects pedal engineered to deliver lush and organic modulation sounds. It utilizes a proprietary dBucket algorithm to emulate the warmth and sonic complexities characteristic of classic analog chorus and vibrato effects. Designed for versatility, the Ola features true bypass switching, a convenient favorite preset function, and stereo input/output capabilities, making it a robust tool for musicians seeking high-quality modulation.

Image: The Strymon Ola Chorus/Vibrato pedal, showcasing nws blue casing, control knobs, and footswitches.

Cov ntaub ntawv kev nyab xeeb

• Always use a compatible 9 Volts DC, center-negative power supply with a minimum current rating of 30 Milliamps. Using an incorrect power supply can damage the unit and void the warranty.
• Do not expose the pedal to moisture, rain, or extreme temperatures.
• Avoid dropping the unit or subjecting it to severe impacts.
• Do not attempt to open the pedal enclosure or modify its internal components. Refer all servicing to qualified personnel.
• Refer to local regulations for proper disposal of electronic waste.

Ntim Cov Ntsiab Lus

The Strymon Ola Chorus/Vibrato pedal is included. Please note that a 9V DC power supply and audio cables are typically sold separately unless specified by your retailer.

Tswj thiab kev sib txuas

The Ola pedal features a user-friendly interface with several control knobs and footswitches for precise sound shaping and effect engagement.

Control Knobs:

• Ceev: Adjusts the rate of the modulation effect.
• Qhov tob: Controls the intensity or sweep range of the modulation.
• Mix: Blends the wet (effected) signal with the dry (unaffected) signal.
• Hom: Selects between different chorus and vibrato modes or algorithms.

Kev taw qhia taw:

• Bypass: Engages or disengages the effect. The Ola features true bypass, ensuring your dry signal remains unaffected when the pedal is off.
• Nyiam: Recalls a saved preset setting.

Kev sib txuas:

• Input (IN): 1/4-inch mono audio input for your instrument.
• Output (OUT L/R): Dual 1/4-inch audio outputs for stereo operation. Use OUT L for mono output.
• Lub zog nkag: 9V DC, center-negative power jack.

Teeb tsa

1. Kev sib txuas fais fab: Connect a compatible 9V DC, center-negative power supply (minimum 30mA) to the power input jack on the pedal.
2. Instrument kev twb kev txuas: Connect your instrument (e.g., guitar) to the IN jack of the Ola pedal using a standard 1/4-inch instrument cable.
3. Amplifier/Effects Connection:
   • Rau mono operation, connect cov OUT L jack rau koj amplifier or the next pedal in your signal chain using a 1/4-inch instrument cable.
   • Rau stereo operation, connect cov OUT L thiab OUT R jacks to two separate amplifiers or stereo inputs of another effects unit using two 1/4-inch instrument cables.
4. Hwj chim On: Xyuas kom txhua qhov kev sib txuas muaj kev ruaj ntseg ua ntej lub hwj chim ntawm koj amplifier and the Ola pedal.

Kev khiav haujlwm

Koom nrog cov nyhuv:

Nias lub Bypass footswitch to engage or disengage the chorus/vibrato effect. The LED indicator will illuminate when the effect is active.

Kho Parameters:

Siv cov Ceev, Qhov tob, Sib tov, thiab Hom knobs to sculpt your desired modulation sound. Experiment with different combinations to explore the full range of chorus and vibrato effects offered by the dBucket algorithm.

Using the Favorite Preset:

• Txuag Preset: Adjust the control knobs to your preferred settings. Press and hold the Nyiam footswitch until its LED blinks, indicating the preset has been saved.
• Recalling a Preset: Coj mus rhaub cov Nyiam footswitch to instantly recall your saved settings. The LED will illuminate to confirm the preset is active.

Kev tu

• Ntxuav: Clean the exterior of the pedal with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials.
• Kev sib txuas Cable: Periodically inspect all audio and power cable connections for signs of wear or damage. Replace faulty cables immediately.
• Cia: When not in use, store the pedal in a dry, temperate environment, away from direct sunlight and extreme temperatures.

Kev daws teeb meem

• Tsis muaj suab:
  • Verify all audio cables are securely connected to the correct input and output jacks.
  • Ensure the power supply is correctly connected and providing the specified voltage thiab tam sim no.
  • Check that your instrument and amplifier are functioning properly.
  • Confirm the pedal is engaged (Bypass LED illuminated).
• Unexpected Noise or Hum:
  • Xyuas kom meej tias txhua yam khoom siv tau grounding zoo.
  • Try a different power supply to rule out power-related noise.
  • Test with different audio cables to check for faulty connections.
• Lub Pedal Tsis Teb:
  • Disconnect and reconnect the power supply to perform a soft reset.
  • If issues persist, consult the Strymon support webqhov chaw.
• Cannot Switch Between Multiple Presets: The Strymon Ola pedal is designed to save and recall a single 'Favorite' preset. It does not offer multiple preset banks or instant switching between numerous distinct settings beyond the engaged/bypassed state and the single saved preset.

Specifications

Warranty thiab Support

For detailed warranty information, technical assistance, and product support, please visit the official Strymon website. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.