THOMSON CT390 Dual Alarm Clock Radio with Projector User Manual

Taw qhia

This manual provides comprehensive instructions for the setup, operation, and maintenance of your THOMSON CT390 Dual Alarm Clock Radio with Projector. Please read this manual carefully before using the device to ensure proper function and to maximize your user experience. Keep this manual for future reference.

Khoom Tshajview

The THOMSON CT390 is a versatile clock radio featuring dual alarms, a weekend mode, and a time projection function. It includes an FM/MW radio tuner and a clear digital display.

Cov yam ntxwv tseem ceeb:

• Digital FM/MW Radio Tuner
• Dual Alarm Function with Snooze
• Weekend Mode for Alarm Deactivation
• Time Projection onto Wall or Ceiling
• Clear LED Zaub

Cov khoom xyaw:

Refer to the image below for a visual guide to the main components of your CT390 unit.

Duab 1: Pem hauv ntej view of the THOMSON CT390 Dual Alarm Clock Radio. This image displays the digital display, control buttons, and the projector lens on the side.

Typical components include the main display, various control buttons (e.g., Time Set, Alarm 1/2, Radio, Volume, Snooze/Dimmer), a projector lens, a speaker, and a power input port.

Teeb tsa

1. Unpacking: Carefully remove the clock radio from its packaging. Retain the packaging for future transport or storage.
2. Kev sib txuas fais fab: Connect the power adapter to the DC input jack on the back of the unit, then plug the adapter into a standard wall outlet. The display will light up.
3. Roj teeb thaub qab (yeem): For time and alarm settings retention during a power outage, insert 2 x AAA batteries (not included) into the battery compartment on the bottom of the unit. Ensure correct polarity (+/-).
4. Kev Teeb Lub Sijhawm Pib:
   • Nias thiab tuav lub LUB SIJ HAWM TXHEEJ khawm. Cov lej teev yuav flash.
   • Siv cov HOS thiab MINUTE nyees khawm los kho lub sijhawm.
   • Xovxwm LUB SIJ HAWM TXHEEJ dua kom paub meej thiab tawm.

Cov lus qhia ua haujlwm

Teeb tsa Lub tswb ceeb toom (Lub tswb ceeb toom 1 thiab Lub tswb ceeb toom 2):

1. Nias thiab tuav lub TSHUAB 1 or TSHUAB 2 khawm. Lub tswb moos tus lej yuav flash.
2. Siv cov HOS thiab MINUTE cov nyees khawm los teeb lub sijhawm ceeb toom xav tau.
3. Xovxwm TSHUAB 1 or TSHUAB 2 again to select the alarm source (Buzzer or Radio). An indicator will appear on the display.
4. Press the respective alarm button one more time to confirm and exit.
5. To activate/deactivate an alarm, briefly press the TSHUAB 1 or TSHUAB 2 button until the alarm indicator appears or disappears.

Hom Hnub So:

The Weekend Mode allows you to disable alarms on Saturday and Sunday automatically without having to manually turn them off. To activate/deactivate Weekend Mode:

• Nias lub WEEKEND button. A "WEEKEND" indicator will appear on the display when active.
• Press it again to deactivate.

Xov tooj cua ua haujlwm:

1. Qhib / Off: Nias lub Xov tooj cua ON/OFF khawm tig lub xov tooj cua rau lossis tawm.
2. Nyob:
   • Nias lub TUNING +/- cov nyees khawm kom manually qhib rau qhov xav tau zaus.
   • Nias thiab tuav TUNING +/- kom tsis siv neeg scanning mus rau qhov chaw nres tsheb tom ntej.
3. Volume Control: Siv cov VOLUME +/- cov nyees khawm los kho qib suab.
4. Kav hlau txais xov: Extend the FM wire antenna fully for optimal reception. For MW reception, rotate the unit for best signal.

Lub Sijhawm Projection:

The projector allows you to display the current time onto a wall or ceiling.

• Qhib Qhov Projection: Nias lub PROJECTOR ON/OFF button to turn the projection on or off.
• Kho lub kaum sab xis: Rotate the projector lens barrel to adjust the projection angle.
• Ua kom pom tseeb: Rotate the focus ring around the projector lens to sharpen the projected image.

Snooze and Display Dimmer:

• Pw: Thaum lub tswb nrov, nias lub SNOOZE button to temporarily silence it for approximately 9 minutes. The alarm will sound again after this period.
• Zaub Dimmer: Nyob rau hauv ib txwm lub sij hawm tso saib hom, nias lub KHAWV KOOB button (often combined with Snooze) to adjust the brightness of the display. Cycle through available brightness levels.

Kev tu

• Ntxuav: Siv daim ntaub mos mos thiab qhuav los ntxuav sab nraud ntawm lub tshuab. Tsis txhob siv cov tshuaj ntxuav uas ua rau tawv, cov roj pleev, lossis cov tshuaj yaj.
• Plua plav: Keep the projector lens free from dust for clear projection. Use a soft lens cloth if necessary.
• Qhov chaw: Place the unit on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation.
• Hloov roj teeb: Yog tias siv roj teeb thaub qab, hloov roj teeb txhua xyoo lossis thaum lub vijtsam qhia cov cim ntawm kev ploj zuj zus thaum lub zog tawmtage.

Kev daws teeb meem

Specifications

Warranty thiab Support

For warranty information, please refer to the warranty card included with your product or visit the official Thomson website. Technical support and customer service contact details can typically be found on the manufacturer's website los yog nyob rau hauv cov khoom ntim.

Note: Information regarding spare parts availability and software updates is not available at this time.