Progress Lighting P6071-31 Outdoor Wall Lantern Instruction Manual

Taw qhia

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

Cov ntaub ntawv kev nyab xeeb

CEEB TOOM: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

CEEB TOOM: Cov khoom no yuav tsum tau muab tso rau hauv raws li cov txheej txheem kev teeb tsa los ntawm ib tus neeg paub txog kev tsim kho thiab kev ua haujlwm ntawm cov khoom thiab cov kev phom sij cuam tshuam.

TSEEM CEEB: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

Ntim Cov Ntsiab Lus

Xyuas kom tseeb tias tag nrho cov khoom muaj nyob ua ntej pib installation.

Light Fixture Assembly
Mounting Hardware Kit (screws, wire nuts, mounting strap)
Cov lus qhia installation

Diagram showing all components included in the package for the outdoor wall lantern.

Daim duab 1: tawg view of the P6071-31 outdoor wall lantern components.

Specifications

Yam ntxwv	Tus nqi
Hom	Txhim Kho Teeb Pom Kev Zoo
Qauv	P6071-31
Xim	Dub
Khoom siv	Aluminium
Style	Ib txwm
Lub Teeb Fixture Form	Phab ntsa
Dimensions (kwv yees)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
Noob Hom	Incandescent, 100W Medium Base (Max)
Voltage	120v XNUMX
Qhov chaw ntsuas	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

Kev teeb tsa thiab kev teeb tsa

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Ua Kev Txuas Hluav Taws Xob:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- Ua tib zoo kaw tag nrho cov xov hlau rau hauv lub qhov hluav taws xob lub thawv.
Mount lub Fixture: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Nruab Lub Teeb: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Rov Qab Fais Fab: Tig lub hwj chim rov qab rau ntawm lub ntsiab Circuit Court breaker.

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

Cov lus qhia ua haujlwm

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
Use a standard wall switch to turn the light fixture on or off.
For optimal performance and longevity, use bulbs within the specified wattage ntau.

Kev tu

Kev saib xyuas tas li yuav pab khaws cia qhov zoo nkauj thiab kev ua haujlwm ntawm koj lub teeb ntsa sab nraum zoov.

Ntxuav: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Hloov qhov muag teev: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
Kev tshuaj xyuas: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

Kaw-up view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

Kev daws teeb meem

If you encounter issues with your fixture, refer to the following common problems and solutions:

Teeb meem	Ua Tau	Kev daws
Lub teeb tsis tig.	Fais fab tuag ntawm Circuit Court breaker. Loose hlau txuas. Lub teeb tsis raug. Faulty phab ntsa hloov.	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. Replace bulb with a new, working one. Consult a qualified electrician to check the switch.
Lub teeb flickers.	Loose noob. Loose hlau txuas. Hom teeb pom kev tsis raug / wattage.	Tighten qhov muag teev hauv qhov (socket). Turn off power, check and tighten wire connections. Ensure bulb is correct type and wattage (max 100W incandescent).
Fixtures hums.	Loos mounting. Incompatible dimmer hloov (yog tias tsim nyog).	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

Warranty thiab Support

Cov khoom no yog them los ntawm a 1-xyoo txwv Warranty from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting webqhov chaw: www.progresslighting.com