1. Taw qhia
The Argox AS8520 is a high-performance cordless imager designed for efficient barcode scanning. It features advanced wireless communication technology, allowing for a data transmission range of up to 100 meters. Equipped with a long-lasting Li-ion battery and an IP42 sealing level, the AS8520 is built for durability and mobility across various environments, including offices, supermarkets, warehouses, and manufacturing facilities.
2. Khoom Tshajview
The AS8520 barcode scanner is designed for comfortable handling and robust performance. Key components include the scanning window, trigger button, and ergonomic grip.
Daim duab 2.1: Sab view of the Argox AS8520 Barcode Scanner, showing the ergonomic handle and trigger button.
Daim duab 2.2: Pem hauv ntej view of the Argox AS8520 Barcode Scanner, highlighting the scanning window and product labels.
3. Teeb Qhia
3.1. Kev teeb tsa thiab kev them nqi roj teeb
- Ensure the scanner is powered off before installing or removing the battery.
- Locate the battery compartment on the scanner handle.
- Insert the Li-ion battery pack, ensuring correct polarity.
- Kaw lub roj teeb kom ruaj ntseg.
- Connect the scanner to its charging base or power adapter using the provided cable. Allow the battery to fully charge before first use.
3.2. Connecting to a Host Device
The Argox AS8520 can connect wirelessly to various host devices, including desktops, laptops, and smartphones. Refer to the separate quick start guide for specific pairing instructions for your operating system or device type.
4. Cov lus qhia ua haujlwm
4.1. Basic Scanning
- Ensure the scanner is powered on and successfully paired with your host device.
- Point the scanning window towards the barcode you wish to scan.
- Press and hold the trigger button. A red LED light source (630nm Visible Red LED) will illuminate the barcode.
- Position the scanner at an appropriate distance (the AS8520 offers superior depth of field up to 40 inches on 40-mil codes) until the barcode is successfully read. A successful scan is typically indicated by an audible beep and/or a visual indicator.
- Tso lub khawm ua kom lub pob qhib.
4.2. Advanced Scanning Features
- Rapid Scan Rate: The AS8520 provides a rapid scan rate of 450 scans/sec for efficient data capture.
- Barcode Symbology Support: Supports GS1 Databar (RSS) and CS (Composite Symbology) barcodes.
- Sunlight Readability: Designed to be readable under direct sunlight conditions.
5. Kev tu
5.1. Ntxuav lub Scanner
- Ensure the scanner is powered off before cleaning.
- Siv cov ntaub mos mos, tsis muaj lint-dawb, dampened with water or a mild cleaning solution to wipe the exterior of the scanner.
- For the scanning window, use a lens cleaning cloth to avoid scratches.
- Do not use abrasive cleaners, solvents, or immerse the scanner in liquid. The IP42 sealing level protects against dust and light water splashes, but not full immersion.
5.2. Kev kho roj teeb
- To maximize battery life, avoid fully discharging the Li-ion battery frequently.
- Khaws lub scanner rau hauv qhov chaw txias, qhuav thaum tsis siv rau lub sijhawm ntev.
- If the battery performance degrades significantly, consider replacing it with an authorized Argox replacement battery.
6. Kev daws teeb meem
| Teeb meem | Ua Tau | Kev daws |
|---|---|---|
| Scanner tsis muaj zog. | Battery is discharged or not properly installed. | Charge the battery. Ensure the battery is correctly seated in its compartment. |
| Scanner tsis nyeem barcodes. | Barcode is damaged, scanner is too far/close, or incorrect symbology settings. | Ensure the barcode is clear. Adjust scanning distance. Check scanner programming for supported barcode types. |
| No data transmitted to host device. | Scanner not paired or out of range. | Re-pair the scanner with the host device. Ensure the scanner is within the 100-meter transmission range. |
| Scanner is unresponsive. | Ib ntus software glitch. | Perform a soft reset by powering off and then on the scanner. If issues persist, consult the manufacturer's support. |
7. Kev qhia tshwj xeeb
| Feature | Specification |
|---|---|
| Qauv | TIAB SA 8520 |
| Scan Rate | 450 scans / sec |
| Lub teeb Source | 630nm Visible Red LED |
| Scanning Performance | Starting at 0.1mm (4 mil) |
| Qhov tob ntawm teb | Up to 40 inches on 40-mil codes |
| Data Transmission Range | 100 meters (wireless) |
| Compatible Devices | Desktop, Laptop, Smartphone |
| Hwj chim Source | Battery Powered (Li-ion battery pack) |
| Ua haujlwm kub | 0 ° C txog 50 ° C (32 ° F txog 122 ° F) |
| Cia Kub | -20 ° C txog 70 ° C (-4 ° F txog 158 ° F) |
| Cov av noo | 10% mus rau 90% txheeb ze humidity, non-condensing |
| Lub teeb theem | Mus txog 70,000 lux |
| Current - Operating | 225 mA @ 4.2 VDC |
| Current - Standby | 32 mA @ 4.2 VDC |
| Power - Operating | 900 mW |
| Power - Standby | 150 mW |
| Reliability (Trigger) | 1,000,000x ua |
| Reliability (Cable) | 320,000 times (90° bend) |
| Poob Specification | 1.5 meter ib |
| Sealing Level | IP42 |
| Yam Nyhav | 1.3, XNUMX kg |
| GTIN/UPC | 702563636336 |
8. Warranty thiab Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Argox website. For technical support, service, or replacement parts, please contact your authorized Argox reseller or Argox customer service directly.