Phau ntawv+

OEM ASC704604AIN02

Phau ntawv qhia

OEM Portable CD Player

Model: ASC704604AIN02

Khoom Tshajview

The OEM Portable CD Player (Model: ASC704604AIN02) is designed for listening to audio CDs and FM radio on the go. It features a compact design, anti-skip protection, and programmable track memory. This device operates on batteries and includes a set of stereo earbuds for immediate use.

OEM Portable CD Player with included earbuds

Image: The OEM Portable CD Player, black in color, shown with the included black stereo earbuds connected. The player has a circular design with an LCD screen and control buttons on the top surface.

Teeb tsa

Unpacking

Carefully remove the CD player and all accessories from the packaging. Verify that all components are present: the portable CD player unit and stereo earbuds.

Powering the Device (Battery Installation)

  1. Locate the battery compartment on the underside of the CD player.
  2. Xaub lub roj teeb lub hau npog qhib.
  3. Insert two (2) AA batteries (not included) into the compartment, ensuring correct polarity (+ and -) as indicated inside the compartment.
  4. Kaw lub roj teeb lub hau npog kom ruaj ntseg.

Note: Always use fresh batteries for optimal performance. Remove batteries if the device will not be used for an extended period.

Txuas Earbuds

Plug the 3.5mm audio jack of the included stereo earbuds into the headphone jack located on the side of the CD player. Ensure the plug is fully inserted.

Cov lus qhia ua haujlwm

Ua si CD

  1. Gently press the "OPEN" button or slide the latch to open the CD compartment lid.
  2. Place an audio CD onto the center spindle, label side facing up. Gently press down on the center of the CD until it clicks into place.
  3. Kaw lub CD lub hau kom ruaj khov kom txog thaum nws latches.
  4. Nias lub PLAY/PAUSE khawm (►/‖) to begin playback. The track number and elapsed time will display on the LCD screen.
  5. Txhawm rau ncua playback, nias lub PLAY/PAUSE khawm dua. Nias nws ib zaug ntxiv kom rov pib dua.
  6. Txhawm rau hla mus rau kab tom ntej, nias lub HLOOV FORWARD khawm (►►|). To go back to the beginning of the current track or the previous track, press the Hla rov qab khawm (|◄◄).
  7. Txhawm rau nres rov qab, nias tus TSIS TAU khawm (■).

The player features 60-second anti-skip protection to prevent interruptions during movement. This feature buffers audio data to ensure smooth playback.

Siv xov tooj cua FM

  1. Ensure no CD is playing.
  2. Nias lub MODE button (if available, or power on and it defaults to radio if no CD).
  3. Siv cov UA TSAUG or TUAJ buttons (often integrated with skip buttons) to find your desired FM station.
  4. Extend the earbud cable as much as possible, as it acts as the FM antenna.

Volume Control

Adjust the volume using the analog volume control dial located on the side or front of the unit. Rotate clockwise to increase volume and counter-clockwise to decrease volume.

Programmable Tracks

This CD player allows you to program up to 20 tracks to play in a specific order.

  1. With the CD stopped, press the Txoj Haujlwm button. The display will show "P01" and flash.
  2. Siv cov HLOOV FORWARD or Hla rov qab buttons to select the first track you wish to program.
  3. Nias lub Txoj Haujlwm button again to confirm the selection. The display will show "P02" and flash.
  4. Repeat steps 2 and 3 to select up to 20 tracks.
  5. Tom qab koj teeb tsa tag nrho cov kev khiav uas koj xav tau lawm, nias lub khawm PLAY/PAUSE button to start playback of the programmed sequence.
  6. To clear the program, open the CD compartment or press the TSIS TAU khawm ob zaug.

Kev tu

Ntxuav

Hloov roj teeb

Replace batteries when the sound becomes distorted, the display dims, or the unit stops functioning. Refer to the "Powering the Device" section for battery installation instructions.

Cia

When not in use, store the CD player in a cool, dry place away from direct sunlight, extreme temperatures, and excessive dust. Remove batteries if storing for an extended period to prevent leakage.

Kev daws teeb meem

Teeb meem Ua Tau Kev daws
Tsis muaj hwj chim / Unit tsis tig rau. Cov roj teeb tuag los yog tso tsis raug. Hloov cov roj teeb AA tshiab, xyuas kom meej tias polarity raug.
CD does not play / "NO DISC" error. CD is dirty, scratched, or inserted incorrectly. CD compartment lid is not closed. Clean the CD with a soft cloth. Re-insert the CD correctly. Ensure the CD compartment lid is fully closed and latched.
Sound skipping or distorted. CD is dirty or scratched. Unit is subject to excessive vibration. Low batteries. Clean the CD. Avoid strong vibrations. Replace batteries.
Kev txais xov tooj cua FM tsis zoo. Earbud cable not fully extended. Weak signal in current location. Fully extend the earbud cable, as it acts as the antenna. Try moving to a different location.
Tsis muaj suab los ntawm pob ntseg. Earbuds not fully plugged in. Volume too low. Faulty earbuds. Ensure earbuds are fully inserted. Increase volume. Test with another pair of earbuds if available.

Specifications

Warranty thiab Support

This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact OEM customer support. Contact information can typically be found on the product packaging or the manufacturer's official webqhov chaw.