Vanxse CCTV Mini Bullet Security Camera (Model MB18) Instruction Manual

1. Taw qhia

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Vanxse CCTV Mini Bullet Security Camera, Model MB18. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

2. Khoom Tshajview

The Vanxse MB18 is a compact analog security camera designed for indoor surveillance. It features a 1/3 CCD sensor, 1000TVL resolution, and a 3.6mm wide-angle lens, providing clear images during the day. Its metal housing and included bracket allow for versatile mounting.

Cov yam ntxwv tseem ceeb:

• 1/3 CCD 1000TVL HD Mini Bullet Camera
• Built-in 3.6mm wide angle lens
• Durable metal case with wall mount bracket
• NTSC Video Format for broad compatibility
• High sensitivity for clear images in various lighting conditions
• Analog output for direct connection to DVRs or CCTV monitors

Cov ntsiab lus pob:

• Vanxse CCTV Mini Bullet Security Camera (MB18)
• Phab ntsa Mount Bracket
• Mounting Screws thiab Phab Ntsa Plugs

3. Teeb cov lus qhia

Follow these steps to properly set up your Vanxse Mini Bullet Security Camera.

3.1 Txhim Kho Lub Koob Yees Duab

1. Xaiv qhov chaw: Xaiv ib qho chaw sab hauv tsev uas muab qhov koj xav tau viewing angle and is within reach of power and video cables. Ensure the surface is stable enough to support the camera.
2. Mark Drill Holes: Position the wall mount bracket against the chosen surface and mark the locations for drilling.
3. Drill Holes: Use an appropriate drill bit to create holes at the marked locations. Insert the provided wall plugs if mounting into drywall or masonry.
4. Secure Bracket: Attach the wall mount bracket to the surface using the provided screws.
5. Txuas lub koob yees duab: Secure the camera to the bracket. Adjust the camera angle as needed and tighten the locking mechanism on the bracket to fix its position.

3.2 Txuas lub koob yees duab

The camera requires a 12V DC power supply (not included) and connects via BNC for video output.

1. Txuas lub zog: Connect a 12V DC power adapter (not included) to the red power input cable of the camera.
2. Connect Video: Connect the yellow BNC video output cable from the camera to your Digital Video Recorder (DVR) or CCTV monitor. Ensure a secure connection.
3. Hwj chim On: Plug in the 12V DC power adapter to an electrical outlet. The camera will power on automatically.
4. Verify Signal: Check your DVR or monitor for the camera's video feed. If no signal is displayed, refer to the Troubleshooting section.

3.3 Yees Duab Qhia Txog Kev Teeb Tsa

4. Cov lus qhia ua haujlwm

The Vanxse MB18 camera operates continuously once powered on. Its primary function is to capture and transmit video footage to a connected DVR or monitor.

4.1 Continuous Surveillance

Once connected and powered, the camera will continuously capture video. The footage will be displayed on your connected monitor or recorded by your DVR, depending on your system configuration.

4.2 Day and Night Operation

The camera is designed to provide clear color images during the day. While it has high sensitivity for low-light conditions, it does not feature infrared (IR) night vision. For optimal night surveillance, ensure adequate external lighting in the monitored area.

4.3 Motion Detection (with compatible DVR)

If connected to a DVR with motion detection capabilities, you can configure the DVR to record only when motion is detected. Refer to your DVR's manual for specific settings.

5. Kev tu

Kev saib xyuas tsis tu ncua ua kom koj lub koob yees duab ruaj ntseg ua haujlwm tau zoo thiab siv tau ntev.

• Ntxuav: Gently wipe the camera lens and body with a soft, dry cloth to remove dust and smudges. Avoid abrasive cleaners or solvents.
• Kev kuaj kab mob: Periodically check all cables and connections for wear, damage, or loose fittings. Ensure connections remain secure.
• Mounting Stability: Verify that the camera's mounting bracket is still securely fastened and the camera's position has not shifted.
• Kev tiv thaiv ib puag ncig: Although the camera has a metal housing, it is primarily designed for indoor use. Protect it from direct exposure to harsh weather conditions, extreme temperatures, and excessive moisture.

6. Kev daws teeb meem

If you encounter issues with your camera, refer to the following common problems and solutions.

7. Cov lus qhia tshwj xeeb

Detailed technical specifications for the Vanxse CCTV Mini Bullet Security Camera, Model MB18.

8. Warranty thiab Support

For warranty information and technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

You can visit the official Vanxse store for more information and products: Vanxse Store