Phau Ntawv Qhia Siv Technoline WT 235 Lub Moos Tswb Tswj Los Ntawm Xov Tooj Cua

1. Taw qhia

This manual provides comprehensive instructions for the Technoline WT 235 Radio-Controlled Alarm Clock. Please read this manual carefully before using the device to ensure proper operation and to understand all features. Keep this manual for future reference.

Ntim Cov Ntsiab Lus

• Technoline WT 235 Radio-Controlled Alarm Clock
• Cov neeg siv phau ntawv
• Nco tseg: 2x AAA Micro LR03 batteries are not included and must be purchased separately.

2. Khoom Tshajview

The Technoline WT 235 is a compact and modern radio-controlled alarm clock designed for clear readability and ease of use. It features a large digital display and intuitive controls.

Pem hauv ntej View thiab Display

Duab 2.1: Pem hauv ntej view of the Technoline WT 235 displaying the current time, date, day of the week, and indoor temperature. The radio signal icon is visible, indicating successful synchronization.

Cov zaub qhia cov ntaub ntawv hauv qab no:

• Sijhawm: Current time in 12-hour or 24-hour format.
• Hnub tim: Day and month.
• Hnub ntawm lub lim tiam: Abbreviated day of the week.
• Nyob sab hauv tsev kub: Chav tsev kub tam sim no.
• DCF-77 Radio Signal Icon: Indicates reception status of the radio-controlled time signal.
• Alarm Icon: Indicates if the alarm is active.
• PM Qhov taw qhia: For 12-hour time format.

Khawm thiab Tswj

Duab 2.2: Paub meej view of the Technoline WT 235, highlighting the display sections and control buttons.

The device features the following control buttons located on the front bottom:

• LUB SIJ HAWM Khawm: Used to enter time setting mode and adjust time-related parameters.
• Lub tswb nrov: Used to enter alarm setting mode and activate/deactivate the alarm.
• '+' khawm: Used to increase values during setting or to toggle display modes.
• '-' khawm: Used to decrease values during setting or to toggle display modes.

The top surface of the alarm clock functions as a Kov Sensor for activating the backlight and snooze function.

Qhov ntev

Duab 2.3: Dimensions of the Technoline WT 235 alarm clock.

The compact design measures approximately 80 x 80 x 30 mm (Width x Height x Depth).

3. Teeb tsa

3.1 Kev teeb tsa roj teeb

1. Open the battery compartment cover on the back of the alarm clock.
2. Insert two (2) AAA Micro LR03 batteries, observing the correct polarity (+ and - markings).
3. Kaw lub roj teeb lub hau npog kom ruaj ntseg.

Upon battery insertion, the alarm clock will power on and automatically begin searching for the DCF-77 radio signal.

3.2 Automatic Time Synchronization (DCF-77)

The Technoline WT 235 is a radio-controlled clock, meaning it automatically synchronizes its time with the DCF-77 signal broadcast from Mainflingen, Germany. This ensures highly accurate timekeeping.

• After battery installation, the clock will automatically attempt to receive the DCF-77 signal. This process may take several minutes.
• A radio signal icon will flash on the display during signal reception. Once the signal is successfully received and synchronized, the icon will appear solid.
• For optimal reception, place the alarm clock away from electronic devices that may cause interference (e.g., TVs, computers, mobile phones) and near a window.

3.3 Manual Time Setting (if needed)

If the radio signal cannot be received or if you are outside the DCF-77 reception area, you can set the time manually.

1. Nias thiab tuav lub LUB SIJ HAWM button for approximately 3 seconds to enter manual time setting mode. The hour digits will flash.
2. Siv cov '+' or '-' nyees khawm los kho lub sij hawm.
3. Nias lub LUB SIJ HAWM nias dua kom paub meej tias teev thiab txav mus rau qhov teeb tsa feeb. Cov lej feeb yuav ci ntsa iab.
4. Siv cov '+' or '-' nyees khawm los kho cov feeb.
5. Nias lub LUB SIJ HAWM button again to confirm the minutes and exit time setting mode.

3.4 Lub Sijhawm Thaj Chaw Teeb

The clock allows for a time zone offset of ±12 hours from the DCF-77 signal.

1. Nyob rau hauv ib txwm lub sij hawm tso saib hom, nias lub LUB SIJ HAWM button once. The time zone offset will be displayed (e.g., '00' for no offset).
2. Siv cov '+' or '-' buttons to adjust the time zone offset. Each press changes the offset by one hour.
3. Nias lub LUB SIJ HAWM button again to confirm the setting and return to normal display.

4. Cov lus qhia ua haujlwm

4.1 Cov Qauv Saib

The clock cycles through different display modes for time, date, and temperature.

• In normal display mode, the time, date, day of the week, and indoor temperature are shown simultaneously.
• Nias lub '+' button to toggle between 12-hour and 24-hour time formats.

4.2 Teeb Tswb

1. Nias thiab tuav lub Tswb button for approximately 3 seconds to enter alarm setting mode. The alarm hour digits will flash.
2. Siv cov '+' or '-' nyees khawm los kho lub tswb moos.
3. Nias lub Tswb button again to confirm the hour and move to minute setting. The alarm minute digits will flash.
4. Siv cov '+' or '-' nyees khawm los kho lub tswb feeb.
5. Nias lub Tswb button again to confirm the alarm time and exit setting mode.

4.3 Qhib/Txo Lub tswb ceeb toom

1. Nyob rau hauv ib txwm lub sij hawm tso saib hom, nias lub Tswb button once. The alarm icon will appear on the display, indicating the alarm is active.
2. Nias lub Tswb button again to deactivate the alarm. The alarm icon will disappear.

4.4 Qhib Ua Haujlwm

When the alarm sounds, gently touch the top surface of the alarm clock (the touch sensor) to activate the snooze function.

• The alarm will pause for approximately 5 minutes and then sound again.
• You can repeat the snooze function multiple times.
• To stop the alarm completely, press any button on the front of the clock (LUB SIJ HAWM, Tswb, '+', los yog '-').

4.5 Teeb Pom Kev

To temporarily illuminate the display, gently touch the top surface of the alarm clock (the touch sensor).

• The backlight will activate for a few seconds, making the display visible in low light conditions.
• This function is separate from the snooze function, though both are activated by the same touch sensor.

5. Kev tu

5.1 Kev ntxuav

• Clean the alarm clock with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the casing lub tso saib.
• Avoid getting moisture into the device.

5.2 Hloov roj teeb

• When the display becomes dim or the functions are erratic, it is time to replace the batteries.
• Replace both AAA batteries simultaneously with new ones. Do not mix old and new batteries.
• Pov tseg cov roj teeb siv raws li cov cai hauv zos.

6. Kev daws teeb meem

7. Cov lus qhia tshwj xeeb

• Qauv: Technoline WT 235
• Hom: Radio-Controlled Alarm Clock (DCF-77)
• Zaub: Cov LCD
• Lub sij hawm Format: 12/24 teev xaiv tau
• Nta: Alarm with Snooze, Backlight (touch sensor activated), Date Display, Day of Week Display, Indoor Temperature Display, Time Zone Setting (±12h)
• Khoom siv: Yas
• Xim: Nyiaj
• Qhov Loj (L x W x H): 80 x 25 x 80 mm (kwv yees 3.15 x 0.98 x 3.15 nti)
• Qhov hnyav: 90 g (kwv yees 3.17 oz)
• Lub zog Source: 2 x AAA Micro LR03 batteries (not included)
• Siv sab hauv / sab nraum zoov: Sab hauv

8. Warranty thiab Support

Technoline products are manufactured with quality and care. This product comes with a standard manufacturer's warranty, typically 1 year from the date of purchase. Please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or visit the official Technoline website rau cov ntaub ntawv tiv tauj.