Troy Teeb Pom Kev Zoo LBLEDWT3LBM018 LS LED Phab Ntsa Sconce Tus Neeg Siv Phau Ntawv Qhia

1. Taw qhia

Ua tsaug rau kev yuav khoomasing the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce. This product is designed to provide efficient and adjustable lighting for various indoor environments. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation or use, and retain them for future reference.

1.1 Cov ntaub ntawv kev nyab xeeb

• CEEB TOOM: Kev pheej hmoo ntawm hluav taws xob poob siab. Tshem tawm lub hwj chim ntawm lub fuse lub thawv los yog Circuit Court breaker ua ntej kev teeb tsa lossis kev pabcuam.
• Txhua qhov kev sib txuas hluav taws xob yuav tsum ua raws li cov cai hauv zos, kab ke, lossis National Electric Code (NEC). Tham nrog tus kws tshaj lij hluav taws xob tsim nyog yog tias koj tsis paub txog kev sib txuas hluav taws xob zoo.
• Cov khoom siv no tsuas yog siv rau sab hauv tsev xwb. Tsis txhob tso dej los yog dej noo.
• Do not attempt to alter the fixture. Any modifications may void the warranty and create a safety hazard.
• Handle the fixture with care. Avoid dropping or subjecting it to strong impacts.

Daim duab 1: Pem hauv ntej view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce in Gloss White finish.

2. Cov Cheebtsam suav nrog

Carefully unpack your fixture and identify all parts. Ensure all components are present and undamaged before discarding packaging materials.

• 1 x LED Bullet Head Miter Arm Wall Sconce (18" Arm, Gloss White)
• 1 x Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
• 1 x Phau Ntawv Qhia

Daim duab 2: Angled view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, highlighting the miter arm and bullet head.

3. Cov lus qhia kev teeb tsa

Tseem ceeb: Before starting installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. If you are unsure about electrical wiring, consult a qualified electrician.

1. Npaj cheeb tsam Installation: Ensure the wall surface is clean, dry, and structurally sound to support the fixture.
2. Fais fab tuag: Locate the circuit breaker or fuse box and turn off the power to the wall switch or outlet where the fixture will be installed. Verify power is off using a voltagua tester.
3. Txuas Mounting Phaj: Secure the mounting plate (included in hardware kit) to the junction box in the wall using the provided screws. Ensure the plate is firmly attached.
4. Ua Kev Txuas Hluav Taws Xob:
   • Txuas lub dub kab mob los ntawm lub qhov ntswg mus rau lub qhov ntswg dub (hot) wire from the junction box using a wire nut.
   • Txuas lub dawb kab mob los ntawm lub qhov ntswg mus rau lub qhov ntswg dawb (neutral) wire from the junction box using a wire nut.
   • Txuas lub hauv av hlau (liab tooj liab los yog ntsuab) los ntawm lub fixture mus rau lub hauv av wire from the junction box and to the mounting plate using a ground screw.

   Ensure all wire connections are secure and properly insulated with wire nuts.
5. Mount lub Fixture: Carefully tuck all wires into the junction box. Align the fixture's back plate with the mounting plate and secure it using the provided screws.
6. Rov Qab Fais Fab: Once the fixture is securely mounted, turn the power back on at the circuit breaker. Test the light fixture.

4. Cov lus qhia ua haujlwm

The Troy Lighting LBLEDWT3LBM018 LED Wall Sconce is designed for straightforward operation.

• Fais fab / Off: Operate the fixture using the standard wall switch connected to its circuit.
• Kho lub teeb: The bullet head of the sconce is adjustable, allowing you to direct the light beam as needed. Gently pivot the bullet head to achieve the desired lighting angle.
• Chaw taws teeb tswj (yog tias muaj): If your installation includes a compatible remote control system (as indicated by "Control Method: Remote" in specifications), refer to the remote control's specific instructions for pairing and operation.

5. Kev tu thiab tu

Proper care will ensure the longevity and appearance of your Troy Lighting fixture.

• Ntxuav: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LED Qhov Chaw Pom: The LED light source in this fixture is non-removable and designed for long-term use. Do not attempt to replace the LED bulb.
• Kev tshuaj xyuas: Periodically check for any loose connections or signs of wear. If any issues are observed, disconnect power and consult a qualified electrician.

6. Kev daws teeb meem

If you experience issues with your fixture, refer to the following common problems and solutions:

If these steps do not resolve the issue, please contact customer support or a qualified electrician.

7. Khoom Specifications

8. Warranty Information

This Troy Lighting product is covered by a 1-xyoo txwv warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer support.

9. Cov neeg siv khoom txhawb nqa

If you have any questions, require assistance with installation, or need to report a problem with your Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, please contact Troy Lighting customer service or your retailer. Please have your model number (LBLEDWT3LBM018) and proof of purchase ready when contacting support.

For more information about Troy Lighting products, you may visit the official Troy Lighting website or their store on Amazon: Troy Lighting Amazon Store.