Taw qhia
This manual provides essential instructions for the safe and effective use of your Fujifilm Instax Square Camera SQ10. Please read this manual thoroughly before using the camera and keep it in a safe place for future reference. The Instax SQ10 is a hybrid instant camera that combines digital imaging technology with instant film printing, allowing you to preview, edit, and select images before printing.
Cov ntaub ntawv kev nyab xeeb
Always observe the following safety precautions to prevent injury or damage to the camera.
- Do not disassemble, modify, or attempt to repair the camera.
- Khaws lub koob yees duab kom deb ntawm dej thiab noo noo.
- Tsis txhob muab lub koob yees duab tso rau qhov kub thiab txias heev lossis tshav ntuj ncaj qha ntev heev.
- Use only specified batteries and film.
- Khaws kom deb ntawm cov menyuam yaus.
- Dispose of batteries and film according to local regulations.
Dab tsi nyob hauv lub thawv
Xyuas kom tseeb tias txhua yam khoom muaj nyob hauv pob:
- Instax Square SQ10 Camera
- Lithium roj teeb
- USB Cable
- Pluaj
- Tus Neeg Siv Los Siv (cov ntawv no)
- USA Warranty Information
Camera Parts and Functions
Daim duab 1: Pem hauv ntej View. This image displays the front of the Instax Square SQ10 camera, highlighting the central lens, the flash unit above it, and the "instax SQ10" branding.
Daim duab 2: Hauv qab View. This image shows the back of the Instax Square SQ10 camera, featuring the large LCD screen and the circular control dial with "MENU OK" button in the center.
- Lens: Captures images.
- Flash: Muab kev ci ntsa iab rau hauv cov xwm txheej uas tsis muaj teeb pom kev zoo.
- LCD npo: Displays captured images, menu options, and camera settings.
- Tswj Dial: Nkag mus rau cov ntawv qhia zaub mov thiab xaiv cov kev xaiv.
- Shutter Buttons: Two buttons on either side of the lens for taking photos.
- Zaj duab xis Ejection Slot: Where printed photos emerge.
- Roj teeb lub thawv: Houses the rechargeable lithium battery.
- MicroSD Card Qhov: Rau kev nthuav dav peev xwm cia khoom.
Teeb tsa
1. Ntxig lub roj teeb
- Qhib lub roj teeb lub hau npog nyob rau hauv qab ntawm lub koob yees duab.
- Insert the supplied lithium battery, ensuring correct orientation according to the polarity indicators.
- Kaw lub roj teeb lub hau npog kom ruaj ntseg.
- Charge the battery using the provided USB cable and a compatible USB power adapter. The charging indicator will light up during charging and turn off when complete.
2. Loading Instax Square Film
- Open the film compartment cover on the back of the camera.
- Align the yellow mark on the film pack with the yellow mark on the camera.
- Insert the film pack straight into the compartment. Do not press down on the film pack.
- Close the film compartment cover. The camera will automatically eject the black film cover sheet.
Figure 3: Film Ejection. This image shows the Instax Square SQ10 camera with the protective black film cover sheet being ejected after a new film pack has been loaded.
3. Ntxig MicroSD Card (yeem)
The camera has internal memory, but a MicroSD card can be used for additional storage.
- Locate the MicroSD card slot, usually near the battery compartment.
- Insert the MicroSD card with the contacts facing down until it clicks into place.
4. Thawj kauj ruam
Upon first power-on or after a battery change, you may need to set the date and time. Follow the on-screen prompts using the control dial.
Ua haujlwm lub koob yees duab
1. Fais fab rau / tawm
Press and hold the power button (usually located near the lens or on the side) to turn the camera on or off.
2. Kev yees duab
- Siv lub LCD screen los teeb koj daim duab.
- Press one of the shutter buttons to capture the image.
- The captured image will appear on the LCD screen for review.
3. Using the LCD Screen and Control Dial
The LCD screen displays various information and allows interaction with the camera's functions.
- Kev taw qhia: Use the outer ring of the control dial to move through menu options or images.
- Kev xaiv: Press the central "MENU OK" button to confirm a selection or access the main menu.
- Rov qab: The curved arrow button typically functions as a "back" or "cancel" button.
4. Applying Filters and Editing
After taking a picture, you can apply various creative filters and make basic edits before printing.
- After capturing an image, select the editing icon (often represented by a brush or palette).
- Use the control dial to browse through available filters (e.g., Vivid, Sepia, Monochrome) and adjustments (e.g., brightness, vignette).
- Ua ntejview the changes on the LCD screen.
- Txheeb xyuas koj cov kev xaiv.
5. Cov duab luam tawm
The hybrid nature of the SQ10 allows you to choose which photos to print.
- After capturing or selecting an image from memory, press the print button (often indicated by a printer icon).
- Confirm the print command. The camera will then eject the printed photo.
- Allow the photo to develop for a few minutes. Do not shake the print.
6. Saving Images
Images are automatically saved to the internal memory or the inserted MicroSD card.
- Koj tuaj yeem rovview saved images by entering playback mode (often indicated by a play icon).
- To transfer images to a computer, connect the camera via USB or remove the MicroSD card and insert it into a card reader.
Kev tu
1. Ntxuav lub koob yees duab
- So lub koob yees duab lub cev nrog ib daim ntaub mos, qhuav.
- For the lens, use a lens cleaning cloth and lens cleaning fluid if necessary. Avoid touching the lens directly.
- Keep the film ejection slot clear of dust and debris.
2. Kev kho roj teeb
- Recharge lub roj teeb tsis tu ncua.
- If not using the camera for an extended period, remove the battery.
- Khaws lub roj teeb rau hauv qhov chaw txias, qhuav.
3. Film Storage
- Store unused film packs in a cool, dry place, away from direct sunlight and high temperatures.
- Do not open the film pack until you are ready to load it into the camera.
Kev daws teeb meem
| Teeb meem | Kev daws |
|---|---|
| Lub koob yees duab tsis muaj hwj chim. | Xyuas kom lub roj teeb tau them tag nrho thiab muab tso rau kom raug. |
| Film does not eject. | Check if film is loaded correctly. Ensure there is film remaining in the pack. |
| Printed photos are too dark/light. | Adjust brightness settings before printing. Ensure flash is used appropriately for lighting conditions. |
| "Card Error" message. | Reinsert the MicroSD card. Try formatting the card (this will erase all data). Use a different MicroSD card. |
Specifications
- Qauv Lub Npe: Instax Square SQ10 Lub Koob Yees Duab Instant
- Qhov Loj (L x W x H): 6.5 x 6.5 x 5 po
- Yam khoom hnyav: 1 pul
- Zaj duab xis hom: Instant (Instax Square)
- Max Shutter Ceev: 10 vib nas this
- Tshwj xeeb Feature: Hybrid Instant Camera (Digital capture with instant print)
- Lub zog Source: Lithium Battery (included)
- Cia: Internal memory, MicroSD card slot
- Chaw tsim tshuaj paus: Fujifilm
- Hnub Ua Ntej Muaj: Lub Plaub Hlis 19, 2017
Warranty thiab Support
Your Fujifilm Instax Square Camera SQ10 comes with a USA Warranty. For detailed warranty terms, service, or technical support, please refer to the included warranty information card or visit the official Fujifilm Instax webqhov chaw.