Philips myLiving PONGEE LED Teeb (Qauv 5058131PN) Phau Ntawv Qhia Siv

1. Taw qhia

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Cov ntaub ntawv kev nyab xeeb

Yuav tsum ua raws li kev ceev faj txog kev nyab xeeb hauv qab no kom tsis txhob raug mob lossis puas tsuaj:

• Kev Nyab Xeeb Hluav Taws Xob: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
• Siv sab hauv tsev nkaus xwb: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Noob Hom: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage qhia nyob rau hauv lub fixture.
• Kev tuav: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
• Ntxuav: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Cov ntsiab lus ntawm pob

Xyuas kom tseeb tias tag nrho cov khoom muaj nyob ua ntej pib installation:

• Philips myLiving PONGEE LED Spot Light fixture (1 unit)
• Mounting hardware (screws, phab ntsa plugs)
• Phau ntawv qhia

Nco tseg: A GU10 LED bulb is tsis suav nrog thiab yuav tsum tau muas nyias.

Daim duab 2: Kev ntim khoom

4. Kev teeb tsa thiab kev teeb tsa

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Figure 3: Product Dimensions (all measurements in mm)

1. Npaj cheeb tsam Installation: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
2. Disconnect hwj chim: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
3. Mount lub Base: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
4. Hlau Fixture: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
5. Nruab Lub Teeb: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
6. Txuas lub cev Fixture: Secure the main body of the spot light to the mounted base.
7. Rov Qab Fais Fab: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Cov lus qhia ua haujlwm

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

• Qhib / Off: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
• Kho Lub Teeb Direction: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Kev tu

• Ntxuav: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Hloov qhov muag teev:
  1. Tshem tawm lub hwj chim ntawm lub Circuit Court breaker.
  2. Allow the bulb to cool completely.
  3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
  4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
  5. Rov qab muaj zog.

7. Kev daws teeb meem

8. Cov lus qhia tshwj xeeb

• Hom Tshuaj: Philips Teeb pom kev zoo
• Qauv nab npawb: 5058131PN
• Khoom Dimensions (L x W x H): 10 x 13.8 x 8.2 cm
• Yam khoom hnyav: 345g ua
• Khoom siv: Hlau
• Xim: Dawb
• Style: Niaj hnub
• Lub teeb Source: LED
• Bulb Socket Type: GU10
• Number of Bulbs: 1 (bulb not included)
• Cov lus qhia Voltage: 220-240 Volts Cov
• Lub zog Source: Electrical cable (wired)
• Hom kev teeb tsa: Surface Mount (Ceiling/Wall)
• Kev ntsuas IP: IP20 (tsuas yog siv sab hauv tsev)
• Tshwj xeeb nta: Energy-efficient, Swivel head
• Kev siv tshwj xeeb: Home, Bedroom, Living Room

9. Warranty thiab Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webqhov chaw. Koj kuj tuaj yeem tiv tauj koj lub khw muag khoom kom tau txais kev pab.

Khaws koj cov ntaub ntawv pov thawj ntawm kev yuav khoom rau txhua qhov kev lees paub.