Soundsation GO-SOUND 10A Active Speaker System

1. Taw qhia

Ua tsaug rau kev yuav khoomasing the Soundsation GO-SOUND 10A Active Speaker System. This manual provides essential information for the safe and efficient operation of your new active speakers. Please read it thoroughly before use and retain it for future reference.

The GO-SOUND 10A is a versatile active speaker system featuring a 10-inch woofer, designed for various applications including karaoke, DJ sets, public address (PA) systems, gym sound, and live music performances. Its portable design and robust construction ensure reliable performance.

Daim duab 1: Pem hauv ntej thiab sab view of the Soundsation GO-SOUND 10A Active Speaker System, showcasing its portable design and protective grille.

2. Cov ntaub ntawv kev nyab xeeb

CEEB TOOM: YUAV TSUM TAU TXAIS KEV PHEM lossis hluav taws xob hluav taws xob, tsis txhob tso cov cuab yeej no los nag lossis dej noo.

CEEB TOOM: Kev pheej hmoo ntawm hluav taws xob SHOCK. Tsis txhob qhib.

Cov cim no qhia txog qhov muaj qhov tsis zoo uas tsis muaj qhov phom sij voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

This symbol indicates that important operating and maintenance instructions are included in the literature accompanying this product.

• Lub zog Source: Connect the unit only to an AC power outlet of the specified voltage (230V 50Hz). Ensure the power cord is not damaged or pinched.
• Qhov cua: Tsis txhob thaiv qhov qhib qhov cua. Nruab raws li cov chaw tsim khoom cov lus qhia.
• Thaum tshav kub kub: Tsis txhob nruab ze ntawm tej qhov chaw kub xws li radiators, lub tshav kub registers, qhov cub, los yog lwm yam apparatus (xws li amplifiers) uas ua kom sov.
• Dej thiab noo noo: Do not use this apparatus near water. Do not expose to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
• Ntxuav: Ntxuav tsuas yog nrog daim ntaub qhuav.
• Kev pab: Tsis txhob sim muab cov khoom no rau koj tus kheej. Xa tag nrho cov kev pabcuam rau cov neeg ua haujlwm tsim nyog. Kev pabcuam yuav tsum tau ua thaum lub cuab yeej raug puas tsuaj rau txhua txoj hauv kev, xws li cov hlua hluav taws xob lossis cov ntsaws ntsaws puas lawm, cov kua tau nchuav los yog cov khoom tau poob rau hauv lub cuab yeej, lub cuab yeej tau raug los nag lossis dej noo, tsis ua haujlwm ib txwm, lossis poob.

3. Teeb tsa

3.1 Unpacking

Carefully unpack your GO-SOUND 10A speaker system. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.

3.2 Qhov chaw

The GO-SOUND 10A is designed as a portable speaker and can be placed on a shelf, stand, or any stable, flat surface. Ensure adequate ventilation around the unit to prevent overheating.

3.3 Kev sib txuas

Refer to the rear panel diagram for all input and output connections.

Daim duab 2: Paub meej view of the rear panel of the Soundsation GO-SOUND 10A, showing all input, output, and control elements.

1. MIC/LINE IN (VOL 1): This input accepts both XLR and 1/4" Jack connectors. Use it for microphones or line-level audio sources. Adjust its volume with the TIAB SA 1 pob qhov rooj.
2. LINE IN (VOL 2): This input accepts RCA (L/R) and XLR connectors. Use it for line-level audio sources such as mixers, media players, or instruments. Adjust its volume with the TIAB SA 2 pob qhov rooj.
3. MIX NTAWV: An XLR output that provides a mixed signal of all inputs. Use this to connect to another active speaker or an external ampua neej nyob.
4. EQ (HIGH/LOW): These knobs allow you to adjust the treble (HIGH) and bass (LOW) frequencies of the overall sound output.
5. HWJ HUAM LED: Illuminates thaum lub tsev yog powered on.
6. CLIP LED: Illuminates when the input signal is too strong, indicating potential distortion. Reduce the input volume if this LED lights up frequently.
7. AC tswv yim: Connect the provided power cable here. Ensure the voltage matches your local power supply (230V 50Hz). The fuse rating is T1.0A/250V.
8. Hwj chim Hloov: Tig lub unit ON los yog OFF.

4. Cov lus qhia ua haujlwm

4.1 Hwj chim Rau/Tawm

1. Ensure all volume knobs (VOL 1, VOL 2) are set to their minimum position before powering on.
2. Connect the power cable to the AC INPUT and then to a suitable power outlet.
3. Tig lub Hwj chim switch to the 'ON' position. The HWJ HUAM LED yuav illumination.
4. To power off, set all volume knobs to minimum, then flip the Hwj chim switch to 'OFF'.

4.2 Adjusting Volume and EQ

Maj mam nce lub TIAB SA 1 thiab/los yog TIAB SA 2 knobs to achieve the desired sound level. Use the HIGH thiab QEEJ EQ knobs to fine-tune the treble and bass frequencies to suit your preference or the acoustics of the room. If the QIB LED flashes frequently, reduce the input volume from your source or the corresponding VOL knob to prevent distortion.

4.3 Stereo Pairing

The GO-SOUND 10A supports stereo pairing. To achieve a stereo setup, you will need two GO-SOUND 10A units. Connect the MIX OUT of one speaker to the LINE IN (XLR) of the second speaker. Ensure your audio source is connected to the first speaker. This configuration allows for a wider and more immersive sound experience.

4.4 Kev Siv Pom Zoo

This active speaker system is suitable for a variety of applications:

• Karaoke: Connect microphones and music sources for vocal performances.
• DJ Sets: Ideal for small to medium-sized events, providing clear and powerful sound.
• Pubs & Gyms: Excellent for background music or announcements.
• Live Music: Can be used as a main PA speaker or a monitor for small bands and solo artists.

5. Kev tu

5.1 Kev ntxuav

To clean the speaker cabinet, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure the unit is unplugged from the power source before cleaning.

5.2 Cia khoom

When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for storage and transport.

6. Kev daws teeb meem

7. Cov lus qhia tshwj xeeb

• Hom Tshuaj: Suab nrov
• Qauv Lub Npe: GO-SOUND 10A
• Hom hais lus: Active, Portable
• Woofer Diameter: 10cm ua
• Maximum tso zis zog: 480 XNUMX w
• Connectivity Technology: RCA, XLR, 1/4" Jack
• Hom Tawm Suab: Lub tso suab
• Tshwj xeeb Feature: Lub tso suab Stereo
• Pom zoo siv: Karaoke, DJ, Pub, Gyms, Live Music
• Compatible Devices: Home theater system, Projector, Television
• Fais fab mov: Wired (AC 230V 50Hz)
• Ntsuam Xyuas Fuse: T1.0A / 250V
• Qhov hnyav: 22550 Grams (approx. 22.55 kg)

8. Warranty & Kev Pab Txhawb

8.1 Limited Warranty

This Soundsation GO-SOUND 10A speaker system comes with a limited warranty. Please refer to the warranty card included with your purchase or contact your local dealer for specific terms and conditions. The warranty typically covers manufacturing defects under normal use.

8.2 Kev Pabcuam Cov Neeg Siv Khoom

For technical assistance, service, or any questions regarding your Soundsation GO-SOUND 10A, please contact your authorized Soundsation dealer or visit the official Soundsation website for support resources. Please have your product model and purchase information ready when contacting support.