Khoom Tshajview
This CURT Class 3 trailer hitch is designed for the Mercedes-Benz V-Class 220d and Metris W447 models, manufactured from 2015 to the present. It provides a 2-inch (50.8mm) receiver tube, suitable for attaching various towing accessories such as cargo carriers and bicycle racks. The hitch is constructed for durability and includes the necessary bolts for installation.
Nco tseg: Hitch pin, mount, wiring, and coupler are not included with this product and must be purchased separately.
Cov ntaub ntawv kev nyab xeeb
Always adhere to the vehicle manufacturer's towing capacity and the hitch's specified weight ratings. Overloading can lead to serious injury or damage. Ensure all connections are secure before towing. Regularly inspect the hitch for any signs of wear, damage, or corrosion. Do not modify the hitch in any way. Always wear appropriate safety gear during installation and maintenance.
Ntim Cov Ntsiab Lus
- CURT Trailer Hitch (Model curt-13276)
- Installation Hardware Set (necessary bolts)
Specifications
| Qauv nab npawb | curt-13276 |
| Tsheb Compatibility | Mercedes-Benz V-Class 220d / Metris W447 (2015-Present) |
| Hitch Class | Chav Kawm 3 |
| Towing Capacity | Kwv yees li 2720 kg (6000 lbs) |
| Vertical Load Capacity | Kwv yees li 400 kg (880 lbs) |
| Receiver Tube Size | 2 hli / 50.8mm |
| Ground Clearance (Hitch Receiver Insertion Port) | Bottom end: 30 cm, Top end: 35 cm |
| Main Body Dimensions (L x W x H) | 37.6 x 111.9 x 29.8 cm |
| Lub cev hnyav | Kwv yees li 22.2 kg |
Kev teeb tsa thiab kev teeb tsa
Installation of the CURT trailer hitch requires mechanical aptitude and appropriate tools. It is recommended to have the installation performed by a qualified professional. Refer to the vehicle's service manual for specific instructions regarding bumper removal or frame access, if necessary. Always ensure the vehicle is securely supported before working underneath.
- Kev npaj: Park the vehicle on a level surface and engage the parking brake. If required, lift the vehicle using a hoist or jack stands for safe access to the undercarriage.
- Access Vehicle Frame: Depending on your vehicle model, it may be necessary to remove or temporarily lower the exhaust, trim panels, or bumper to access the frame mounting points.
- Position the Hitch: Carefully lift the trailer hitch into position, aligning the mounting holes on the hitch with the corresponding holes on the vehicle's frame.
- Ruaj ntseg nrog Hardware: Insert the provided bolts and hardware through the aligned holes. Hand-tighten all fasteners to ensure proper alignment.
- Thaum kawg Tightening: Refer to the specific torque specifications provided in the hitch's included instruction sheet (not provided in this general manual) to tighten all bolts securely. Ensure all connections are firm.
- Reassemble: Reinstall any components that were removed or lowered during the installation process.
Duab: pem hauv ntej view of the CURT trailer hitch, showing the main receiver tube and mounting arms.
Image: Diagram indicating the 2-inch receiver tube size with directional arrows.
Duab: Rov qab view of a Mercedes-Benz V-Class with the CURT trailer hitch installed, showing ground clearance measurements of 30cm and 35cm for the hitch receiver.
Image: Full rear view of a Mercedes-Benz V-Class with the CURT trailer hitch discreetly installed below the bumper.
Duab: Lub kaum sab nraub qaum view of a Mercedes-Benz V-Class, highlighting the installed CURT trailer hitch.
Cov lus qhia ua haujlwm
Once the CURT trailer hitch is securely installed, it is ready for use with compatible hitch-mounted accessories.
- Txuas Accessories: Insert your desired hitch-mounted accessory (e.g., cargo carrier, bike rack) into the 2-inch receiver tube.
- Secure with Pin and Clip: Align the accessory's pinhole with the hitch receiver's pinhole. Insert a hitch pin and secure it with a clip (not included) to prevent the accessory from detaching.
- Txheeb xyuas qhov txuas: Before driving, ensure the accessory is firmly seated and secured, with no excessive movement or play.
- Kev faib tawm hnyav: Distribute the load evenly on cargo carriers to maintain vehicle stability. Do not exceed the hitch's vertical load capacity or the accessory's weight limit.
Kev tu
Proper maintenance will ensure the longevity and safe operation of your CURT trailer hitch.
- Kev tshuaj xyuas tsis tu ncua: Periodically check all bolts and fasteners for tightness. Retighten to specified torque values if necessary.
- Kev tiv thaiv corrosion: Keep the hitch clean and free of dirt, salt, and debris. Apply a rust-inhibiting paint or coating to any exposed metal surfaces to prevent corrosion, especially in harsh environments.
- Receiver Tube Care: Keep the inside of the receiver tube clean to ensure easy insertion of accessories. Lubricate with a light grease if needed.
Kev daws teeb meem
If you encounter issues with your CURT trailer hitch, consider the following common solutions:
- Loose Hitch: If the hitch feels loose after installation, re-check all mounting bolts and ensure they are tightened to the manufacturer's specifications.
- Difficulty Inserting Accessories: Ensure the receiver tube is clean and free of obstructions. Check for any deformation of the receiver tube or the accessory shank.
- Suab nrov txawv txawv: Investigate any rattling or clunking sounds during operation. This may indicate loose connections or an improperly secured accessory.
- Reduced Towing Performance: Verify that the total weight of your trailer or cargo does not exceed the hitch's or your vehicle's rated capacity.
Warranty thiab Support
This CURT trailer hitch comes with a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your product or contact CURT customer support directly. For technical assistance or compatibility inquiries, please visit the official CURT website lossis hu rau lawv lub chaw pabcuam neeg siv khoom.
Chaw tsim tshuaj paus: CURT
Qauv nab npawb: curt-13276
ASIN: B0765SWPC1
