Taw qhia
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Cov ntaub ntawv kev nyab xeeb
Always follow basic safety precautions when installing or using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Fais fab tawm: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Siv sab hauv tsev nkaus xwb: Qhov no lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Correct Base: Kom paub meej lamp holder is compatible with an E27 base.
- Voltage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampcov kev cai.
- Tsis Dimmable: Qhov no lamp is not dimmable. Do not use it with dimmer switches.
- Qhov muag xis nyob: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Ntim Cov Ntsiab Lus
Lub pob muaj:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Cov lus qhia installation
- Fais fab tuag: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Tshem Tawm Laus Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp tus tuav.
- Nruab Tshiab Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Qhov chaw: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Rov Qab Fais Fab: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Cov lus qhia ua haujlwm
This Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Automatic On / Off: Cov lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Nruab hnub Sensor: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Motion Sensor: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Lub Teeb Zoo: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Kev tu
The Philips LED Lamp with Sensor requires minimal maintenance.
- Ntxuav: Ensure the power is off before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Qhov chaw Sensor: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Kev daws teeb meem
| Teeb meem | Ua Tau | Kev daws |
|---|---|---|
| Lamp tsis qhib. |
|
|
| Lamp tsis tua. |
|
|
| Sensor sensitivity seems low. |
|
|
Specifications
| Feature | Paub meej |
|---|---|
| Hom | Philips |
| Qauv nab npawb | 929002058731 |
| Hom Lub Teeb | LED |
| Wattage | 8 XNUMX w |
| Incandescent Sib Xws | 60 XNUMX w |
| Lamp Puag | E27 |
| Xim Xim | Kub Dawb |
| Xim kub | 2700 Nws |
| Luminous Flux | 806 Lumen |
| Voltage | 100-240V qhov hluav taws xob |
| Ntau zaus | 50 Hertz |
| Tshwj xeeb nta | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Siv sab hauv / sab nraum zoov | Sab hauv |
| Lub neej ntev | 15,000 teev |
| Qhov Loj (H x W) | 12.2 cm x 6.25 cm |
| Khoom siv | Yas |
Warranty thiab Support
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Kev them nyiaj yug hauv internet: Mus saib www.philips.com/Support rau FAQs thiab kev xaiv hu.
