POWSAV NBW-903 18-Outlet Surge Protector Power Strip User Manual

1. Taw qhia

This manual provides essential information for the safe and effective use of your POWSAV NBW-903 18-Outlet Surge Protector Power Strip. Please read all instructions carefully before use and retain this manual for future reference.

2. Cov ntaub ntawv kev nyab xeeb

• Do not exceed the total rating: The maximum power rating for this product is 1875W (15A). Exceeding this limit may cause damage to the unit and create fire hazards.
• High-power devices: When the power rating of a device is over 1000W, please plug it directly into an existing wall outlet. It is not recommended to use the power strip for such devices.
• Sparking during power-on: When the power strip is turned on, a spark may occur around the plugging point. This is normal. To prevent this, power off the power strip before plugging in or unplugging devices.
• ETL Kev Nyab Xeeb Certified: This product is ETL safety certified.
• Fire-Resistance: Constructed with environmental protection and fire-resistance PC shell with flame retardant at 1382℉ for enhanced durability and safety.

3. Khoom Nta

The POWSAV NBW-903 is designed to provide extensive power distribution and surge protection for multiple electronic devices.

• 18 AC qhov hluav taws xob: Features 18 standard AC outlets for powering a wide range of electronics.
• 4 USB chaw nres nkoj: Includes 3 USB-A ports and 1 USB-C port (DC 5V, Total 3.0A, 17W) for convenient charging of mobile devices. Note: The USB-C port is not a Quick Charger 3.0 and does not support devices requiring 9-22V charging voltage.
• Kev tiv thaiv Surge: Equipped with a 3-level complementary surge protector circuit (TVS, MOV, GDT) with a minimum 2100 Joules energy absorbing capacity to protect devices from power spikes and fluctuations.
• Kev tiv thaiv overload: An over-current protection switch limits the power strip's working current to prevent overheating.
• Flat Plug & Cord: Features a 6-foot heavy-duty extension cord with a right-angled flat plug for flexible placement against furniture or walls. Includes reusable fastening cable ties for organization.
• Qhov taw qhia teeb: Includes 'Protected' and 'Grounded' indicator lights to confirm proper functioning of surge protection and grounding.

Duab: Tshajview of the POWSAV NBW-903 power strip with 18 AC outlets and 4 USB ports, demonstrating its capacity for multiple devices.

Image: Close-up of the 3 USB-A and 1 USB-C ports on the POWSAV NBW-903, actively charging several mobile devices.

4. Teeb tsa

1. Tshem tawm: Ua tib zoo tshem daim hlua fais fab tawm ntawm nws lub ntim.
2. Qhov chaw: Position the power strip in a dry, indoor location away from water sources and direct sunlight. The flat plug design allows for placement behind furniture.
3. Mounting (yeem): The power strip features mounting holes on the back for wall or desk mounting. Use appropriate screws (not included) to secure it.
4. Plug hauv: Insert the power strip's flat plug into a grounded wall outlet.

Duab: Paub meej view of the POWSAV NBW-903, highlighting its dimensions and the keyhole mounting slots on the underside for secure installation.

5. Cov lus qhia ua haujlwm

1. Fais fab / Off: Locate the red 'Reset/OFF' switch on the power strip. Press it to the 'ON' position to supply power to the outlets and USB ports. Press it to 'OFF' to cut power.
2. Qhov taw qhia teeb: Once powered on, check the blue 'Protected' and 'Grounded' indicator lights. Both should illuminate, indicating that the surge protection and grounding functions are active.
3. Txuas Devices: Plug your AC-powered devices into the 18 available outlets. Connect your USB-powered devices to the 3 USB-A or 1 USB-C ports.
4. Overload Reset: In case of an overload, the power strip will automatically shut off. Disconnect some devices, then press the 'Reset' button on the power switch to restore power.

Image: The POWSAV NBW-903 power strip showing the illuminated 'Protected' and 'Grounded' indicator lights, confirming active safety features.

6. Kev tu

• Ntxuav: Ensure the power strip is unplugged and all devices are disconnected before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners.
• Kev tshuaj xyuas: Periodically inspect the power cord and the power strip for any signs of damage, such as fraying, cuts, or discoloration. Discontinue use if damage is found.
• Cia: When not in use, store the power strip in a cool, dry place. Use the included cable ties to keep the cord organized.

7. Kev daws teeb meem

• Tsis muaj zog:
  • Check if the power strip's main switch is in the 'ON' position.
  • Xyuas kom lub hwj chim sawb tau ruaj ntseg ntsaws rau hauv lub qhov hluav taws xob ua haujlwm.
  • If the 'Protected' light is off, the surge protection may have expired. Replace the unit.
  • If the 'Grounded' light is off, there may be a grounding issue with the wall outlet. Consult an electrician.
• Tshaj dhau: If the power strip shuts off unexpectedly, it may be due to an overload. Unplug some devices and press the 'Reset' button on the power switch.
• Cov teeb meem them USB: Ensure your device's charging cable is properly connected. Verify that your device does not require a Quick Charger 3.0 or higher voltage (9-22V) as the USB-C port does not support these.

8. Cov lus qhia tshwj xeeb

9. Warranty thiab Support

POWSAV offers a 30-hnub rov qab txoj cai thiab a 12-lub hlis warranty for this product. For any inquiries or support needs, please contact POWSAV customer service. They aim to respond within 24 hours.