LEDVANCE Linear LED Shelf Light 400mm

1. Taw qhia

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Please read this manual thoroughly before installation and retain it for future reference.

2. Cov lus qhia kev nyab xeeb

• Kev Nyab Xeeb Hluav Taws Xob: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Npaj siv: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Kev ntsuas IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Lub teeb Source: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Kev tuav: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Ntxuav: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Cov ntsiab lus ntawm pob

Xyuas kom tseeb tias tag nrho cov khoom muaj nyob ua ntej pib installation:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Kev sib txuas accessories

4. Cov lus qhia tshwj xeeb

Nco tseg: Cov lus qhia tshwj xeeb yuav hloov pauv yam tsis ceeb toom.

5. Kev teeb tsa thiab kev teeb tsa

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Npaj cheeb tsam Installation: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Disconnect hwj chim: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Mark Drilling Points: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Drill Holes: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Txuas Mounting Brackets: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Kev sib txuas hluav taws xob: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Mount lub Fixture: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Rov Qab Fais Fab: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Cov lus qhia ua haujlwm

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Tsis siv neeg ua haujlwm: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Tsis siv neeg kaw-kaw: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Qhov chaw Sensor: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Kev tu

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Ntxuav: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Kev tshuaj xyuas: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Lub teeb Source: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Kev daws teeb meem

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Lub Teeb Tsis Tig:
  • Check if the power supply is connected and the circuit breaker is on.
  • Xyuas kom cov kev sib txuas ntawm cov xov hlau ruaj ntseg.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Lub teeb nyob twj ywm tas li:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Teeb ci ntsa iab los yog flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Xyuas kom voltage supply is stable and within the specified range (240V).

If these steps do not resolve the issue, contact customer support.

9. Warranty thiab Support

This LEDVANCE Linear LED Shelf Light comes with a 2-xyoo lav txij hnub ntawm kev yuav khoom, npog qhov tsis xws ntawm cov ntaub ntawv thiab kev ua haujlwm raws li kev siv ib txwm muaj.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.