VECTOR SS6LV 1200 Peak Amp Phau Ntawv Qhia Siv Lithium Jump Starter

Khoom Tshajview

The VECTOR SS6LV is a compact and powerful 1200 peak amp lithium jump starter designed to instantly start cars and trucks with up to 8-cylinder engines. Beyond its primary function, it serves as a versatile portable power bank, featuring USB-A (2.1 Amps) and USB-C (3.1 Amps) ports for charging various electronic devices. It also includes an integrated LED work light for convenience in low-light conditions. The unit is equipped with a Smart Controller for safe operation, providing reverse polarity protection, and comes with heavy-duty powder-coated clamps.

Image: The VECTOR SS6LV jump starter with its attached heavy-duty clamps ,sivasing nws compact design.

Dab tsi nyob hauv lub thawv

Thaum qhib lub pob, koj yuav pom cov khoom hauv qab no:

• VECTOR SS6LV Lithium Jump Starter Unit
• Smart Controller with Heavy Duty Powder Coated Clamps
• AC Charging Adapter
• DC (Car) Charging Adapter
• USB Charging Cable

Image: All components included in the VECTOR SS6LV product box.

Khoom nta

• Jump Starter: Delivers 1200 peak amps, capable of jump starting vehicles with up to 8-cylinder engines.
• USB Charger: Equipped with USB-A (2.1 Amps) and USB-C (3.1 Amps) ports to charge and power various electronic devices such as phones, tablets, and laptops.
• Rechargeable Lithium roj teeb: Internal lithium-ion battery can be recharged using the included AC, DC, or USB adapters.
• Kev Ua Haujlwm Zoo: Features an Engine Start Smart Controller with reverse polarity protection, ensuring correct and safe connection of jumper cables.
• Portable Design: Compact and lightweight, making it easy to store and transport for on-the-go power needs.
• LED ua haujlwm teeb: Integrated bright LED light provides illumination for nighttime or low-light situations.

Duab: Paub meej view of the VECTOR SS6LV unit with key features labeled.

Teeb tsa

Kev them nqi pib

Before first use, fully charge the VECTOR SS6LV unit. It is recommended to fully charge the unit every 3 to 6 months to maintain optimal battery health, even if not in use.

1. Connect the USB Charging Cable to the unit's USB-C port.
2. Connect the other end of the USB Charging Cable to either the AC Charging Adapter (for wall outlet) or the DC Charging Adapter (for vehicle 12V accessory outlet).
3. Plug the chosen adapter into its respective power source. The battery indicator lights on the unit will illuminate to show charging progress.
4. Charging is complete when all indicator lights are solid blue.

Connecting for Jump Start

Ensure the vehicle's ignition is off before connecting the jump starter.

1. Locate the battery terminals in your vehicle. The positive terminal is usually marked with a "+" sign and covered by a red cap. The negative terminal is marked with a "-" sign.
2. Txuas liab (zoo) clamp of the Smart Controller to the positive (+) terminal of the vehicle's battery.
3. Txuas cov dub (tsis zoo) clamp of the Smart Controller to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if safe to do so.
4. Plug the Smart Controller cable into the "ENGINE START" port on the VECTOR SS6LV unit. The Smart Controller will indicate readiness (e.g., a solid green light).

Image: The jump starter connected to a vehicle battery, ready for use.

Kev khiav haujlwm

Dhia pib lub tsheb

1. Ensure the VECTOR SS6LV unit is fully charged and properly connected to the vehicle's battery as described in the "Setup" section.
2. Once the Smart Controller indicates readiness (e.g., solid green light), attempt to start the vehicle's engine. Do not crank for more than 5 seconds.
3. If the vehicle does not start, wait at least 30 seconds before attempting again. Do not exceed three consecutive jump start attempts.
4. Once the vehicle starts, immediately disconnect the Smart Controller from the VECTOR SS6LV unit, then disconnect the black (negative) clamp, followed by the red (positive) clamp from the vehicle battery.

Siv ua Power Bank

The VECTOR SS6LV can charge various electronic devices.

• Connect your device's USB charging cable to either the USB-A (2.1 Amps) or USB-C (3.1 Amps) port on the side of the VECTOR SS6LV unit.
• Press the power button on the unit to begin charging. The indicator lights will show the remaining battery level.

Image: The jump starter unit actively charging a smartphone.

Siv lub teeb ua haujlwm LED

The integrated LED work light provides illumination for various tasks.

• To turn on the LED work light, press and hold the power button for approximately 3 seconds.
• To cycle through light modes (solid, strobe, SOS), briefly press the power button.
• To turn off the LED work light, press and hold the power button again for approximately 3 seconds.

Image: The bright LED work light on the end of the unit.

Kev tu

Recharge lub Unit

To ensure the longevity and readiness of your VECTOR SS6LV, it is crucial to maintain its charge. Recharge the unit after each use, and at least every 3 to 6 months, even if it has not been used. This prevents deep discharge and prolongs battery life.

Cia

Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children. Ensure the rubber covers for the ports are securely closed to protect against dust and moisture.

Kev daws teeb meem

Specifications

• Hom Tshuaj: Vector
• Qauv nab npawb: SS 6 LV
• Khoom Dimensions: 3" H x 1" W x 7" H
• Yam khoom hnyav: 13.8 hli
• Ampqaug zog: 1200 Amps
• Peak Output Tam sim no: 1200 Amps
• Hom roj teeb: Lithium Ion (1 yuav tsum tau, suav nrog)
• USB-A Cov Zis: 2.1 Amps
• USB-C tso zis: 3.1 Amps
• Chaw tsim tshuaj paus: Baccus Global LLC
• Lub Tebchaws Keeb Kwm: Tuam Tshoj

Cov ntaub ntawv kev nyab xeeb

CEEB TOOM: Cov khoom no tuaj yeem nthuav tawm koj rau tshuaj lom suav nrog tshuaj txhuas thiab txhuas, uas tau paub hauv Xeev California los ua rau mob qog noj ntshav thiab yug menyuam tsis taus lossis lwm yam kev puas tsuaj rau kev ua me nyuam. Yog xav paub ntxiv mus rau www.P65 Qhia rau sawv daws.

Always refer to the full user manual for complete safety instructions and warnings before operating this device.

Official Product Video

Watch this official video from VECTOR to understand the key differences between battery chargers and jump starters, and how the VECTOR SS6LV functions.

Video: "VECTOR - Charger vs Jumper" - This video explains the distinction between battery chargers and jump starters, highlighting the immediate boost provided by a jump starter like the SS6LV.