Troy Lighting Tristan 12-Light Semi-Flush Mount

Taw qhia

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your Troy Lighting Tristan 12-Light Semi-Flush Mount fixture, Model C2812-PBR. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This image displays the complete Troy Lighting Tristan 12-Light Semi-Flush Mount fixture. It features a central brass canopy that attaches to the ceiling, with twelve radiating arms of varying lengths, each terminating in a bulb socket. The fixture has a modern, sputnik-like design, showcasing its brass finish and the arrangement of its light sources.

Cov ntaub ntawv kev nyab xeeb

CEEB TOOM: Kev pheej hmoo ntawm hluav taws xob poob siab. Tshem tawm lub hwj chim ntawm lub fuse lub thawv los yog Circuit Court breaker ua ntej kev teeb tsa lossis kev pabcuam.

• Txhua qhov kev sib txuas hluav taws xob yuav tsum ua raws li cov cai hauv zos, kab ke, lossis National Electric Code (NEC). Tham nrog tus kws tshaj lij hluav taws xob tsim nyog yog tias koj tsis paub txog kev sib txuas hluav taws xob zoo.
• Lub teeb no tsuas yog siv rau sab hauv tsev xwb.
• Xyuas kom lub mounting nto tuaj yeem txhawb nqa qhov hnyav ntawm lub fixture.
• Tsis txhob tshaj qhov siab tshaj wattage specified for each bulb socket.
• Hnav looj tsom iav thiab hnab looj tes thaum nruab.
• Never connect the fixture to a power source while it is still in the packaging.

Ntim Cov Ntsiab Lus

Xyuas kom tseeb tias txhua yam khoom muaj nyob ua ntej pov tseg cov ntaub ntawv ntim khoom.

• Fixture Body (with pre-attached arms and wiring)
• Mounting Plate/Crossbar
• Mounting Screws and Wire Nuts
• Phau ntawv qhia

Nco tseg: Light bulbs are not included and must be purchased separately. This fixture requires 12 incandescent bulbs, maximum 60 watts each.

Cov cuab yeej xav tau

• Phillips Lub Taub Hau Ntsia Hlau
• Taub Hau Taub Hau Ntsia Hlau
• Hlau Strippers
• Daim kab xev hluav taws xob
• Ncej (yog tias tsim nyog)
• Cov iav tsom iav

Kev teeb tsa thiab kev teeb tsa

Follow these steps carefully to install your semi-flush mount fixture.

1. Fais fab tuag: Locate the circuit breaker or fuse box that supplies power to the fixture location. Turn off the main power switch. Verify power is off using a voltagua tester.
2. Npaj rau Installation: Carefully unpack the fixture and its components. Lay them out on a clean, soft surface to prevent scratches.
3. Mounting Phaj: Attach the mounting plate (crossbar) to the electrical junction box in the ceiling using the provided mounting screws. Ensure it is securely fastened.
4. Ua Kev Txuas Hluav Taws Xob:
   • Txuas lub dub kab mob los ntawm lub qhov ntswg mus rau lub qhov ntswg dub (hot) wire from the junction box using a wire nut.
   • Txuas lub dawb kab mob los ntawm lub qhov ntswg mus rau lub qhov ntswg dawb (neutral) wire from the junction box using a wire nut.
   • Txuas lub hauv av hlau (liab tooj liab los yog ntsuab) los ntawm lub fixture mus rau lub hauv av wire from the junction box (or to the green ground screw on the mounting plate) using a wire nut.
   • Ensure all wire nuts are tightly secured and wrap connections with electrical tape for added safety.
5. Mount lub Fixture: Carefully tuck all wires into the junction box. Align the fixture's canopy with the mounting plate and secure it using the provided screws or nuts, ensuring it sits flush against the ceiling.
6. Nruab qhov muag teev: Screw the appropriate incandescent bulbs (max 60W each) into the 12 sockets. Do not overtighten.

Cov ncauj lus kom ntxaws view of the Troy Lighting Tristan fixture, focusing on several of its brass-finished arms and the white, spherical bulbs installed in their sockets. This close-up highlights the construction of the arms and the connection points for the bulbs, providing a clearer look at the fixture's material and design elements.

Tseem ceeb: After installation, restore power at the circuit breaker and test the fixture.

Cov lus qhia ua haujlwm

The Troy Lighting Tristan fixture operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Kev tu

Ntxuav

To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. Avoid spraying cleaners directly onto the fixture.

Hloov qhov muag teev

Before replacing bulbs, turn off the power to the fixture at the circuit breaker and allow bulbs to cool completely. Unscrew the old bulb and screw in a new incandescent bulb (max 60W). Ensure the replacement bulb matches the specified wattage los tiv thaiv overheating.

Kev daws teeb meem

Specifications

Warranty

This Troy Lighting fixture is covered by a 1-xyoos chaw tsim tshuaj paus txwv warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

Txhawb nqa

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Troy Lighting customer support. For the most up-to-date contact information, please visit the official Troy Lighting website los yog xa mus rau koj cov ntaub ntawv yuav khoom.

When contacting support, please have your model number (C2812-PBR) and proof of purchase readily available.