MUSE MT-201 USB Turntable Stereo System

1. Taw qhia

Ua tsaug rau kev yuav khoomasing the MUSE MT-201 USB Turntable Stereo System. This manual provides important safety instructions, setup guidance, operating procedures, and maintenance tips to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the product and retain it for future reference.

2. Cov lus qhia kev nyab xeeb

• Lub zog Source: Tsuas yog siv lub adapter fais fab uas tau teev tseg xwb. Xyuas kom tseeb tias lub voltage phim koj lub zog hauv zos.
• Dej thiab noo noo: Do not expose the unit to rain, moisture, or liquids. Do not place objects filled with liquids, such as vases, on the unit.
• Thaum tshav kub kub: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
• Qhov cua: Xyuas kom muaj qhov cua kom zoo. Tsis txhob thaiv qhov qhib qhov cua.
• Ntxuav: Unplug lub tsev ntawm lub qhov hluav taws xob ua ntej ntxuav. Siv ib daim ntaub mos, qhuav. Tsis txhob siv cov tshuaj ntxuav kua los yog tshuaj aerosol.
• Kev pab: Tsis txhob sim muab cov khoom no rau koj tus kheej. Xa mus rau txhua qhov kev pabcuam rau cov neeg ua haujlwm pabcuam uas tsim nyog.
• Qhov chaw: Place the unit on a stable, flat surface to prevent damage from falling.
• Stylus Care: Handle the stylus (needle) with care to avoid bending or breaking it. Keep it clean.

3. Cov ntsiab lus ntawm pob

Carefully unpack your MUSE MT-201 and ensure all items are present and in good condition. If any items are missing or damaged, please contact your retailer.

• MUSE MT-201 Turntable Stereo System
• 45 RPM Cov Ntaub Ntawv Adapter
• Fais fab Adapter
• Cov neeg siv phau ntawv

Duab 3.1: Product packaging showing the turntable and accessories.

4. Khoom Tshajview

Familiarize yourself with the components and controls of your MT-201 turntable.

4.1 Pem Hauv Ntej thiab Sab View

Duab 4.1: Pem hauv ntej thiab sab view of the MUSE MT-201, highlighting the control panel and integrated speakers.

4.2 Turntable Cheebtsam

Duab 4.2: Close-up of the turntable platter, tonearm, and stylus.

1. Platter: Where the vinyl record rests.
2. Spindle: Holds the record in place.
3. Lub suab nrov: Tuav lub cartridge thiab stylus.
4. Stylus (Koob): Reads the grooves of the record.
5. Tonearm Lift Lever: Tsa thiab txo qis lub suab phom.
6. Speed ​​Selector: Switch between 33, 45, and 78 RPM.
7. Auto-Stop Switch: Enables or disables automatic stopping of the platter at the end of a record.
8. Lub hwj chim / Volume Knob: Turns the unit on/off and adjusts volume.
9. Function Selector: Switches between Phono, Bluetooth, USB/SD, and AUX modes.
10. USB Chaw nres nkoj: Rau kev ua si USB drive.
11. SD daim npav qhov: Rau kev ua si SD card.
12. Lub mloog pob ntseg Nkaus: Rau tus kheej mloog.
13. AUX Input: Txhawm rau txuas cov khoom siv suab sab nraud.
14. RCA Cov Zis: Rau kev txuas rau sab nraud amplifiers los yog lub zog hais lus.
15. DC hauv Jack: Rau txuas lub hwj chim adapter.

5. Teeb tsa

Ua raws li cov kauj ruam no los teeb tsa koj lub turntable thawj zaug.

1. Tshem tawm: Carefully remove the turntable from its packaging.
2. Qhov chaw: Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Tshem Tawm Tiv Thaiv Cover: Open the turntable lid. Remove any protective packaging materials, including the stylus guard from the needle.
4. Txuas lub zog: Insert the DC plug of the power adapter into the DC IN jack on the back of the unit. Plug the AC adapter into a wall outlet.
5. External Connections (Optional):
   • RCA Cov Zis: Yog txuas rau sab nraud amplifier or powered speakers, use an RCA cable (not included) to connect the RCA output jacks on the turntable to the corresponding input jacks on your audio system.
   • AUX Input: To play audio from an external device (e.g., smartphone, MP3 player), connect it to the AUX IN jack using a 3.5mm audio cable (not included).

6. Kev ua haujlwm

6.1 Ua si cov ntaub ntawv yas

1. Hwj chim On: Turn the Power/Volume knob clockwise to turn on the unit.
2. Xaiv hom: Set the Function Selector to 'PHONO'.
3. Xaiv Ceev: Choose the appropriate speed (33, 45, or 78 RPM) using the Speed Selector switch. For 45 RPM records, place the 45 RPM adapter on the spindle.
4. Cov Ntaub Ntawv Qhov Chaw: Muab cov ntaub ntawv yas tso rau ntawm lub phaj turntable.
5. Auto-Stop: If you want the platter to stop automatically at the end of the record, ensure the Auto-Stop switch is ON. If you prefer continuous rotation, set it to OFF.
6. Txoj Haujlwm Tonearm: Gently lift the tonearm using the Tonearm Lift Lever. Move the tonearm over the desired track of the record.
7. Qis Tonearm: Slowly lower the tonearm onto the record using the Tonearm Lift Lever. The music will begin to play.
8. Kho qhov ntim: Kho qhov ntim siv lub pob qhov Power/Volume.
9. Xaus ntawm Kev Ua Si: When the record finishes, the tonearm will automatically return to its rest position if Auto-Stop is ON. If Auto-Stop is OFF, manually lift the tonearm and return it to its rest.

6.2 Bluetooth txuas

1. Hwj chim On: Turn the Power/Volume knob clockwise to turn on the unit.
2. Xaiv hom: Set the Function Selector to 'BT' (Bluetooth). The unit will enter pairing mode, indicated by a flashing indicator light.
3. Pair Device: On your Bluetooth-enabled device (smartphone, tablet, etc.), search for Bluetooth devices and select 'MUSE MT-201' from the list.
4. Kev lees paub: Once paired, the indicator light will stop flashing and remain solid. You can now play audio from your device through the turntable's speakers.
5. Kho qhov ntim: Adjust the volume using the Power/Volume knob on the turntable and/or your connected device.

6.3 USB/SD Ua Si

1. Hwj chim On: Turn the Power/Volume knob clockwise to turn on the unit.
2. Ntxig Xov Xwm: Ntxig ib lub USB flash drive rau hauv qhov chaw nres nkoj USB lossis daim npav SD rau hauv qhov chaw SD card.
3. Xaiv hom: Set the Function Selector to 'USB/SD'. The unit will automatically detect and begin playing audio files los ntawm kev tso tawm.
4. Tswj: Use the playback controls (e.g., Play/Pause, Next/Previous Track) on the unit to manage your music.
5. Kho qhov ntim: Kho qhov ntim siv lub pob qhov Power/Volume.

6.4 Auxiliary Input (AUX IN)

1. Hwj chim On: Turn the Power/Volume knob clockwise to turn on the unit.
2. Txuas Ntaus: Connect your external audio device (e.g., MP3 player, smartphone) to the AUX IN jack using a 3.5mm audio cable.
3. Xaiv hom: Set the Function Selector to 'AUX'.
4. Ua si Suab: Pib playback ntawm koj lub cuab yeej sab nraud.
5. Kho qhov ntim: Adjust the volume using the Power/Volume knob on the turntable and/or your connected device.

6.5 Lub mloog pob ntseg tso zis

For private listening, plug your headphones into the headphone jack. The internal speakers will be muted automatically.

7. Kev tu

7.1 Ntxuav Lub Tsev

• Nco ntsoov tshem lub tshuab tawm ntawm lub qhov hluav taws xob ua ntej ntxuav.
• Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents.
• Keep the turntable lid closed when not in use to protect the components from dust.

7.2 Kev Saib Xyuas Stylus

• The stylus is delicate. Handle it with extreme care.
• To clean the stylus, use a soft brush and gently brush from back to front. Do not brush from side to side.
• A worn stylus can damage your records and produce poor sound quality. Replace the stylus when you notice a degradation in sound or after approximately 300-500 hours of use.

7.3 Kev Saib Xyuas Cov Ntaub Ntawv

• Siv cov ntaub ntawv los ntawm lawv cov npoo kom tsis txhob kov cov grooves.
• Store records in their sleeves and in a vertical position to prevent warping.
• Clean records regularly with a dedicated record cleaning brush or solution to remove dust and static.

8. Kev daws teeb meem

9. Cov lus qhia tshwj xeeb

• Qauv Lub Npe: MT-201 TSI
• Hom Tshuaj: MUSE
• Turntable Ceev: 33 / 45 / 78 rpm
• Kev sib txuas: Bluetooth, USB, SD, AUX IN, RCA OUT, Headphone Jack
• Integrated Speakers: Yes (2 x 5 Watts power output)
• Tshwj xeeb nta: Auto-stop switch, USB playback, SD card playback, Bluetooth receiver
• Lub cev muaj zog: Direct Drive (as per product data, typically belt-driven for consumer turntables)
• Kev siv fais fab: 60 XNUMX w
• Voltage: 230V (AC)
• Khoom siv: Yas
• Yam khoom hnyav: 2.7 kg ib
• Yam khoom Dimensions (L x W x H): 25.4 x 5.1 x 6.9 cm
• Xim: Dub
• Lub Tebchaws Keeb Kwm: Tuam Tshoj

10. Warranty thiab Support

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or contact your retailer for specific warranty terms and conditions. For technical support or service inquiries, please contact the MUSE customer service department or your local distributor.