AXIS Q6225-LE PTZ Lub Koob Yees Duab Phau Ntawv Qhia

1. Taw qhia

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS Q6225-LE PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This camera is designed for robust outdoor surveillance in challenging conditions.

2. Cov ntaub ntawv kev nyab xeeb

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• Kev teeb tsa: Installation must be performed by qualified personnel in accordance with all local and national electrical and building codes.
• Fais fab mov: Use only the specified power supply (60 watts) for this device. Ensure the power source is stable and meets the camera's requirements.
• Ib puag ncig: The camera is designed for outdoor use. However, avoid exposing it to extreme conditions beyond its specified operating range.
• Ntxuav: Tshem tawm lub hwj chim ua ntej ntxuav. Siv ib daim ntaub mos, qhuav. Tsis txhob siv cov kua los yog aerosol ntxuav.
• Kev hloov kho: Do not attempt to modify or disassemble the camera. This may void the warranty and pose safety risks.

3. Cov ntsiab lus ntawm pob

Xyuas kom tseeb tias txhua yam khoom muaj nyob hauv pob:

• AXIS Q6225-LE PTZ Lub Koob Yees Duab
• Daim ntawv qhia kev teeb tsa
• Mounting Bracket thiab Kho Vajtse
• Network Cable Connector
• Documentation and Software CD (if applicable)

Daim duab 1: AXIS Q6225-LE PTZ Camera. This image displays the grey-colored PTZ camera unit, highlighting its robust housing and integrated lens system, designed for outdoor surveillance.

4. Kev teeb tsa thiab kev teeb tsa

4.1 Txhim Kho Lub Koob Yees Duab

The AXIS Q6225-LE is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions.

1. Select a suitable mounting location that provides the desired field of view thiab nyob ze rau lub zog thiab kev sib txuas network.
2. Use the provided mounting template to mark drill holes on the wall.
3. Drill pilot holes and secure the mounting bracket using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly locked in place.

4.2 Fais fab thiab Network Txuas

Connect the camera to power and network as follows:

• Lub zog: Connect the power cable to a 60-watt power source. Ensure the connection is secure and weatherproof.
• Network: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera supports Wi-Fi for wireless communication. Refer to the network configuration section for wireless setup.

4.3 Kev teeb tsa thawj zaug

After physical installation and connection, access the camera's web interface for initial configuration:

1. Qhib a web browser on a computer connected to the same network as the camera.
2. Enter the camera's IP address in the browser's address bar. If the IP address is unknown, use the AXIS IP Utility tool to discover it.
3. Follow the on-screen prompts to set up a new password for the administrator account.
4. Configure basic network settings, date/time, and video stream settings.

5. Ua haujlwm lub koob yees duab

5.1 Kev Tswj Xyuas Pan, Tilt, thiab Zoom (PTZ)

The AXIS Q6225-LE camera features full PTZ capabilities, allowing remote adjustment of its viewing angle and zoom level. Control is typically performed via the camera's web interface or compatible video management software (VMS).

• Yias: Rotate the camera horizontally to cover a wider area.
• Qaij: Adjust the camera vertically to view objects at different heights.
• Optical Zoom: Use the optical zoom feature to magnify distant objects without loss of image quality.

5.2 Kev Tshawb Pom Kev Txav Mus Los thiab Kev Ceeb Toom

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings in the web interface to trigger recordings or notifications when movement is detected.

5.3 Infrared (IR) Illumination

Equipped with infrared light sources, the camera provides clear video surveillance in low-light or complete darkness. IR illumination activates automatically or can be manually controlled.

6. Kev tu

6.1 Kev ntxuav

Regular cleaning of the camera lens and housing is recommended to ensure optimal performance, especially in dusty or harsh environments.

• Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Ntxuav lub tsev lub koob yees duab nrog kev tshaj tawmamp ntaub. Tsis txhob siv cov tshuaj abrasive los yog cov kuab tshuaj.

6.2 Firmware Hloov tshiab

Tshawb xyuas Axis Communications tsis tu ncua website for firmware updates. Keeping the camera's firmware up-to-date ensures access to the latest features, security enhancements, and bug fixes.

7. Kev daws teeb meem

This section addresses common issues you might encounter with your AXIS Q6225-LE camera.

8. Cov lus qhia tshwj xeeb

9. Warranty thiab Support

For warranty information and technical support, please refer to the official Axis Communications website lossis hu rau koj tus neeg muag khoom tso cai. Khaws koj daim ntawv yuav khoom ua pov thawj ntawm kev yuav khoom.

Cov ntaub ntawv online: www.axis.com ua