BUVAYE BN03 Car Jump Starter with Air Compressor

Taw qhia

The BUVAYE BN03 Car Jump Starter with Air Compressor is a versatile and essential tool for vehicle owners. Designed for 12-volt vehicles, it features a powerful 4000A peak current capable of jump-starting gasoline engines up to 10 liters and all diesel engines. Beyond jump-starting, it integrates a 150 PSI air compressor for tire inflation, an emergency power bank for charging mobile devices, and multiple LED light modes for various situations. This device is built with 10 safety protections to ensure secure operation in diverse conditions, from extreme cold to high temperatures.

Dab tsi nyob hauv lub thawv

Upon unboxing your BUVAYE BN03, you will find the following components:

• 1 × Jump Starter with Air Compressor
• 1 × Heavy-Duty Battery Jumper Cables
• 1 × Detachable Air Hose
• 4 × Gas Nozzles (Presta to Schrader adapter, needle adapter, short tapered nozzle, long tapered nozzle)
• 1 × USB-C them cable
• 1 × Phau ntawv qhia
• 1 × EVA Nqa Cov Ntaub Ntawv

Teeb tsa

Kev them nqi pib

Before first use, or if the device has been stored for an extended period, ensure the jump starter is fully charged. Connect the included USB-C charging cable to the USB-C input port on the device and plug the other end into a suitable USB power adapter (not included). The LCD display will indicate the charging status. It is recommended to keep the battery starting power above 50% for optimal performance.

Kev txheeb xyuas cov khoom

Familiarize yourself with the main components and controls of the device:

• Lub hwj chim hloov: Tig lub cuab yeej rau / tawm.
• Air Pressure + / -: Adjusts target air pressure for inflation.
• Pressure Unit Adjustment: Cycles through PSI, BAR, KPA, Kg/cm².
• LED Flashlight Switch: Activates and cycles through flashlight, SOS, and strobe modes.
• USB-A Cov Zis: Rau kev them cov khoom siv sab nraud.
• USB-C Input Port: Rau kev them lub jump starter.
• Smart Clip Socket: Connects the smart jumper cables.
• Inflator Hose Socket: Connects the detachable air hose.
• Zoo Clamp (Red): Txuas rau lub qhov (+) positive ntawm lub roj teeb.
• Negative Clamp (Dub): Txuas rau lub qhov tsis zoo (-) ntawm lub roj teeb.
• Jump Start Port: Connects to the smart jumper cables.

Cov lus qhia ua haujlwm

Dhia pib lub tsheb

Ua raws li cov kauj ruam no kom pib koj lub tsheb kom muaj kev nyab xeeb:

1. Kauj ruam 1: Insert the Smart Clip into the Jump Starter's jump start port. Ensure a secure connection.
2. Kauj ruam 2: Txuas cov liab liab zoo (+) clamp to the positive (+) terminal of the vehicle's dead battery. Connect the black negative (-) clamp to the negative (-) terminal of the vehicle's dead battery. The smart cables will auto-detect the connection.
3. Kauj ruam 3: Once the indicator light on the smart clip turns green, start your car engine.
4. Kauj ruam 4: After the engine starts, immediately remove the clamps from the car battery, then disconnect the smart clip from the jump starter.

Inflating Tires and Other Devices

The integrated air compressor can inflate car tires, bicycle tires, motorcycle tires, sports balls, and more.

1. Kauj ruam 1: Connect the air hose to the valve of the tire or device you wish to inflate. Ensure it is securely screwed on.
2. Kauj ruam 2: Press and hold the power button (often indicated by a "M" or similar icon) for 2 seconds to turn on the device. The LCD display will show the current pressure.
3. Kauj ruam 3: Long press the "O" button to switch between inflation modes (car, motorcycle, bicycle, ball). Short press the "O" button to select the desired pressure unit (PSI, BAR, KPA, Kg/cm²).
4. Kauj ruam 4: Press the "+" and "-" buttons to preset the desired pressure value.
5. Kauj ruam 5: Press the power button (often indicated by a "M" or similar icon) again to start the inflation pump. The pump will automatically stop once the preset pressure is reached.

Siv ua Power Bank

The BUVAYE BN03 can serve as a portable power bank to charge your electronic devices.

• Connect your device's charging cable to the USB-A output port on the jump starter.
• Lub dhia pib yuav pib them koj lub cuab yeej.

Siv lub teeb LED

The built-in LED light offers three modes for various emergency or outdoor situations.

• Press the LED flashlight switch button once for constant illumination (Flashlight mode).
• Press it again to activate the SOS signal mode.
• Press it a third time for Strobe mode.
• Press it a fourth time to turn off the light.

Kev tu

• Regular Charge: To maintain battery health and ensure readiness, charge the jump starter every two months, especially if not used for a long time.
• Kev Tswj Kub Kub: If the product becomes very hot during use (e.g., during prolonged tire inflation), allow it to cool down for at least 10 minutes before continuing operation.
• Cia: Store the device in a cool, dry place. Avoid leaving it in extreme temperatures (very hot or very cold environments) for extended periods, as this can negatively impact the lithium battery's lifespan and performance.
• Ntxuav: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive cleaners.

Kev daws teeb meem

Specifications

Warranty thiab Support

BUVAYE offers a 1-year product quality maintenance lub sijhawm thiab kev pab cuam lub neej for the BN03 Car Jump Starter. For any questions, concerns, or technical assistance, please feel free to contact BUVAYE customer support. Refer to the contact information provided in the product packaging or on the official BUVAYE webqhov chaw.