LAFAER Motion Sensor Under Cabinet Light

1. Cov ntsiab lus ntawm pob

Xyuas kom tseeb tias txhua yam khoom muaj nyob hauv koj pob:

• 1 x LAFAER Motion Sensor Under Cabinet Light (Model EC-SL380)
• 1 x Mounting Hardware (includes metal base with adhesive and screws)
• 1 x Type-C Charging Cable
• 1 x Instruction Manual (cov ntaub ntawv no)

2. Khoom Tshajview

The LAFAER Motion Sensor Under Cabinet Light features an adjustable lamp with a digital display for easy monitoring and control.

2.1 Cheebtsam

• Lub teeb Bar: Contains LED lights and a magnetic surface for attachment.
• Tswj Module: Houses the motion sensor, digital display, and control buttons. This section can rotate relative to the light bar.
• Mounting Base: A metal base that can be attached to surfaces using adhesive or screws, providing a magnetic attachment point for the light.
• USB-C Port: Rau them lub roj teeb sab hauv.

2.2 Digital Display Indicators

The intuitive digital display provides real-time information:

• Roj teeb theem: Qhia txog feem pua ​​​​​​ntawm lub zog seemtage.
• Sensing Hom: Indicates the currently active motion sensing mode (Constant On, Night Sensing, All-Day Sensing).
• Qib Brightness: Displays the selected brightness percentage (25%, 50%, 75%, 100%).
• Xim kub: Shows the active color temperature (3000K, 4500K, 6500K).

Duab: Paub meej view of the digital display, illustrating battery level, brightness, and sensing mode icons.

3. Kev teeb tsa thiab kev teeb tsa

The LAFAER light offers flexible installation options to suit various indoor locations.

3.1 Magnetic Mounting

The light can be magnetically attached to any iron metal surface directly. For non-metallic surfaces, use the provided metal mounting base.

1. Npaj Qhov Nto: Clean the desired installation surface to ensure it is dry and free of dust or grease.
2. Txuas lub hauv paus mounting:
   • Adhesive Method: Peel the protective film from the adhesive on the back of the metal mounting base. Press the base firmly onto the cleaned surface for at least 30 seconds. Allow 24 hours for the adhesive to cure before attaching the light.
   • Screw Method: For a more permanent installation, use the provided screws to secure the metal mounting base to the surface.
3. Txuas Lub Teeb: Align the magnetic side of the light bar with the installed metal mounting base. The light will snap into place magnetically.

Image: Illustration of the magnetic installation process, showing the light bar attaching to two separate magnetic bases.

3.2 Hook Design

The light also features a built-in hook for hanging in various locations.

Duab: Ib qho ntxaws view of the hook design on the light, allowing for versatile hanging options.

3.3 Adjusting Sensing Direction

The control module, which contains the motion sensor, can be rotated up to 120 degrees to customize the sensing direction.

Image: The light's digital display and motion sensor, highlighting the flexible sensing direction feature.

Image: A visual representation of the light's motion detection capabilities, showing a 10-foot range and 120-degree angle.

4. Cov lus qhia ua haujlwm

The light is controlled via touch buttons located near the digital display.

4.1 Fais fab / Off

Press and hold the power button (usually the main button) for a few seconds to turn the light on or off.

4.2 Changing Sensing Modes

Cycle through the available sensing modes by pressing the mode button (refer to the product diagram for button identification).

• Constant On Mode: Lub teeb tseem nyob tsis tu ncua.
• Night Sensing Mode: The light activates only when motion is detected in a dark environment.
• All-Day Sensing Mode: The light activates whenever motion is detected, regardless of ambient light conditions.

In sensing modes, the light automatically turns off if no motion is detected within the sensing area for approximately 25 seconds.

Image: Visual explanation of the All-Day Sensing Mode and Night Sensing Mode, including the automatic 25-second auto-off feature.

4.3 Adjusting Brightness Levels

Press the brightness button to cycle through four brightness levels: 25%, 50%, 75%, and 100%.

4.4 Kev Hloov Kub Xim

Press the color temperature button to cycle through three color temperature options:

• Dawb (3000K): A soft, yellowish light.
• Nruab nrab Dawb (4500K): A balanced, natural white light.
• Txias Dawb (6500K): A bright, bluish-white light.

Image: Visual guide to selecting color temperatures and brightness levels, demonstrating the different light outputs.

5. Kev them nyiaj yug

The LAFAER light is equipped with a rechargeable internal battery. The digital display will show the current battery level.

1. When the battery level is low, connect the provided Type-C charging cable to the light's USB-C port.
2. Connect the other end of the cable to a standard USB power adapter (not included).
3. The digital display will indicate charging status. A full charge can provide up to 6 months of use in motion-sensing mode (with an average of 6 triggers per day) or up to 32 hours of continuous lighting at 25% brightness.

Image: The light connected to a USB-C charging cable, illustrating its long-lasting battery capabilities.

6. Kev tu

• Ntxuav: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Dej tsis kam: Cov khoom no yog tsis dej resistantTsis txhob cia dej los yog av noo ntau dhau.
• Kev kho roj teeb: For optimal battery life, avoid fully discharging the battery frequently. Charge the light regularly.

7. Kev daws teeb meem

8. Cov lus qhia tshwj xeeb

9. Cov Ntawv Thov Ntau Yam

The LAFAER Motion Sensor Under Cabinet Light is designed for various indoor uses, providing illumination where needed.

Image: Examples of the light's application in different indoor environments such as closets, garages, hallways, kitchens, bedrooms, and even tents.

10. Warranty thiab Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official LAFAER webqhov chaw. Khaws koj daim ntawv txais yuav khoom rau kev lees paub.