Milex 2 Burner Gas Braai

Taw qhia

Thank you for choosing the Milex 2 Burner Gas Braai. This manual provides essential information for the safe assembly, operation, and maintenance of your new gas braai. Please read these instructions thoroughly before use and retain them for future reference.

The Milex 2 Burner Gas Braai features powerful burners for precise heat control, a sleek design, and high-quality materials for durability. It includes convenient features such as a warming rack, automatic ignition, and a gas bottle hook.

Cov ntaub ntawv tseem ceeb ntawm kev nyab xeeb

• Siv sab nraum zoov nkaus xwb: This appliance is designed for outdoor use only. Do not operate indoors.
• Qhov cua: Ensure adequate ventilation. Do not operate in an enclosed area.
• Gas Lub tog raj kheej: Store gas cylinders in a well-ventilated area, away from heat sources.
• Flammable Materials: Keep flammable materials, liquids, or aerosols away from the appliance.
• Leak Test: Always perform a leak test on all gas connections before first use and after any gas cylinder change.
• Me Nyuam thiab Tsiaj Tsiaj: Khaws cov menyuam yaus thiab cov tsiaj kom deb ntawm cov khoom siv kub.
• Kev saib xyuas: Tsis txhob tso lub cuab yeej siv thaum siv.
• Nyeem cov lus qhia: Always read and follow all instructions in this booklet before operating the appliance.

Kev teeb tsa thiab kev sib dhos

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included assembly diagram for detailed steps.

1. Sib dhos lub cev tseem ceeb: Follow the instructions to connect the base and main grill housing.
2. Attach Side Shelves: Secure the side shelves to the main body using the provided hardware. These shelves offer convenient space for utensils and platters.
3. Install Wheels: Attach the wheels to the designated locations on the base for easy mobility.
4. Place Cooking Grills and Warming Rack: Position the black matte enamel cast iron cooking grill and the iron wire warming rack inside the braai.
5. Connect Gas Regulator and Hose: The braai comes with a ZA regulator and 60cm PVC hose. Connect the hose to the braai's gas inlet and the regulator to your gas bottle. Ensure all connections are tight.
6. Ua Leak Test: Before first use, apply a soapy water solution to all gas connections. Bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not use the braai if a leak is detected.

Daim duab 1: Pem hauv ntej view of the Milex 2 Burner Gas Braai, illustrating its compact design and side shelves.

Cov lus qhia ua haujlwm

Teeb pom kev zoo Burners:

1. Qhib lub hau: Always open the braai lid before lighting.
2. Qhib Gas Supply: Ensure the gas bottle valve is fully open.
3. Ignite First Burner: Push and turn the control knob for the left burner to the "HIGH" position. Immediately push and hold the ignitor button for 3-5 seconds. You should hear a click and see the burner ignite.
4. Ignite Second Burner: Once the left burner is lit, turn its control knob to "HIGH". The right burner will automatically ignite from the flame of the left burner.
5. Kho Thaum tshav kub kub: Once both burners are lit, adjust the control knobs to your desired heat level (LOW to HIGH).
6. Troubleshooting Ignition: If a burner does not light within 5 seconds, turn off the gas supply, wait 5 minutes, and repeat the lighting procedure. If ignition issues persist, refer to the Troubleshooting section.

Cooking with Your Braai:

• Preheating: Close the lid and allow the braai to preheat for 10-15 minutes on medium heat before placing food on the grill.
• Kev tswj qhov kub thiab txias: Use the control knobs to adjust the flame intensity for different cooking requirements. The integrated thermometer in the hood allows for accurate temperature monitoring.
• Warming Rack: Utilize the warming rack to keep cooked food warm or to gently toast buns.
• Txawm ua noj: The black matte enamel cast iron cooking grill ensures even heat distribution for consistent results.

Figure 2: The Milex 2 Burner Gas Braai in use, demonstrating the cooking surface and side shelves.

Kev tu thiab tu

• Ntxuav Grill Grate: After each use, once the braai has cooled, clean the black matte enamel cast iron cooking grill. The product care instructions specify "Hand Wash Only" for these components. Use a grill brush to remove food residue.
• Kev ntxuav sab nrauv: Wipe down the steel hood and front panel with a damp ntaub thiab xab npum me me. Tsis txhob siv cov tshuaj abrasive uas tuaj yeem ua kom puas tsuaj.
• Burner Maintenance: Periodically check burner ports for blockages (e.g., from food debris or insects). Clean with a wire brush if necessary.
• Cia: When not in use for extended periods, store the braai in a dry, protected area. Disconnect the gas bottle.

Kev daws teeb meem

Khoom Specifications

• Hom Tshuaj: Milex
• Qauv: 2 Burner Gas Braai
• Xim: Dub
• Khoom siv: Stainless Steel (Burner, Thermometer, Handle), Steel (Hood & Front Panel), Cast Iron (Cooking Grill), Iron Wire (Warming Rack)
• Pob Dimensions: 79 x 58 x 44 cm
• Yam khoom hnyav: 13, XNUMX kg
• Burners: 2, #409 Stainless Steel
• Ignition: Tsis Siv Neeg Ignition
• Cov Cheebtsam suav nrog: Gas Braai, ZA Regulator, 60cm PVC Hose
• Pom zoo siv: Outdoor Home Use

Warranty thiab Support

For warranty information or technical support, please contact Milex customer service. Spare part information is not available or provided directly in this manual. Please refer to the official Milex website or your retailer for further assistance.

You can visit the official Milex store for more products and information: Milex Store on Amazon.co.za