Taw qhia
This manual provides essential information for the proper installation, operation, and maintenance of your SRAM Eagle AXS Pod Controller. Please read this manual thoroughly before using the product to ensure safe and efficient performance.
Figure 1: SRAM Eagle AXS Pod Controller
The SRAM Eagle AXS Pod Controller is an electronic bicycle shifter designed for precise and reliable gear changes. It features a compact design and intuitive controls for an enhanced riding experience.
Cov ntaub ntawv kev nyab xeeb
- Always ensure all components are securely fastened before riding. Loose components can lead to loss of control and injury.
- Refer to a qualified bicycle mechanic for installation if you are unsure about any steps.
- Regularly inspect the controller and associated components for wear or damage. Replace worn or damaged parts immediately.
- Keep the controller and battery away from extreme temperatures and moisture.
- Do not attempt to disassemble or modify the controller, as this may void the warranty and cause malfunction.
Ntim Cov Ntsiab Lus
Xyuas kom tseeb tias txhua yam khoom muaj nyob hauv pob:
- SRAM Eagle AXS Pod Controller (1 unit)
- Mounting Clamp (for handlebar attachment)
- CR2032 Battery (pre-installed or separate)
- Quick Start Guide (yog muaj)
Teeb tsa
1. Installation on Handlebar
- Qhov chaw: Determine the optimal position for the controller on your handlebar. The clamp-on mount allows for flexible placement.
- Daim ntawv txuas: Qhib lub mounting clamp and place it around the handlebar. Secure the clamp using the provided bolt and a T25 Torx wrench. Tighten to the manufacturer's specified torque (refer to the quick start guide or SRAM's official documentation for exact torque specifications).
- Kev taw qhia: Adjust the angle of the controller for ergonomic access to the buttons.
Figure 2: Controller mounted on handlebar
The image shows the SRAM AXS Pod Electronic Controller securely mounted on a bicycle handlebar, illustrating its compact design and button placement.
2. Pairing with AXS Components
The AXS Pod Controller must be paired with your SRAM AXS derailleur and other AXS components.
- Wake Up Components: Ensure all AXS components (derailleur, dropper post if applicable) are awake by pressing their AXS buttons briefly.
- Nkag Hom Pairing: Press and hold the AXS button on the derailleur until the LED flashes slowly.
- Pair Controller: Press and hold the AXS button on the Pod Controller until its LED flashes slowly.
- Confirm Pairing: Once both LEDs flash rapidly and then turn solid green, the components are paired. Repeat for any other AXS components.
Figure 3: SRAM AXS Pod Controller
This image displays the SRAM AXS Pod Controller, highlighting its design and the AXS branding, indicating its compatibility within the SRAM AXS ecosystem.
Cov lus qhia ua haujlwm
Hloov Gears
The AXS Pod Controller features two distinct buttons for shifting. By default, the upper button shifts to a larger cog (easier gear), and the lower button shifts to a smaller cog (harder gear).
- Up-shift (Easier Gear): Nias lub upper button luv luv.
- Down-shift (Harder Gear): Nias lub lower button luv luv.
- Multi-shift: Hold down either button to shift multiple gears in succession. The number of gears shifted can be customized via the AXS app.
Customization with AXS App
For advanced customization, download the SRAM AXS app on your smartphone. The app allows you to:
- Reverse shift logic (upper button for harder gear, lower for easier).
- Adjust multi-shift settings (number of gears shifted per hold).
- Monitor battery levels of all AXS components.
- Update firmware for improved performance and features.
Kev tu
Ntxuav
- So cov maub los nrog adamp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners.
- Do not spray water directly into the controller or its buttons.
Hloov roj teeb
The AXS Pod Controller uses a CR2032 coin cell battery.
- Nkag Mus Rau Chav Roj Teeb: Locate the battery cover on the underside of the controller.
- Tshem Tawm Cov Roj Teeb Qub: Use a small coin or flat-head screwdriver to gently open the cover and remove the old CR2032 battery.
- Ntxig Lub Roj Teeb Tshiab: Ntxig lub roj teeb CR2032 tshiab nrog rau sab zoo (+) tig los.
- Kev Ruaj Ntseg Cover: Replace the battery cover and ensure it is securely closed to maintain water resistance.
Nco tseg: Pov tseg cov roj teeb uas siv los ua lub luag haujlwm raws li cov cai hauv zos.
Kev daws teeb meem
| Teeb meem | Ua Tau | Kev daws |
|---|---|---|
| Tus tswj tsis teb | Tsawg los yog roj teeb tuag | Hloov CR2032 roj teeb. |
| Tus tswj tsis teb | Not paired with AXS components | Perform pairing procedure as described in the Setup section. |
| Shifting is inconsistent or delayed | Kev cuam tshuam lossis tsis muaj teeb meem | Ensure no strong electromagnetic interference sources are nearby. Check battery levels of all AXS components. |
| Cannot customize settings via AXS app | Bluetooth txuas teeb meem | Ensure Bluetooth is enabled on your device. Bring your device closer to the bike. Restart the app and components. |
Specifications
| Feature | Paub meej |
|---|---|
| Hom | SRAM |
| Qauv Lub Npe | 107603 |
| Tshooj Naj Npawb | 00.3018.313.002 |
| UPC | 710845891502 |
| Khoom siv | Composite |
| Mounting Hom | Clamp-On Mount |
| Yam Nyhav | 0.25 phaus (kwv yees 0.11 kg) |
| Yam khoom Dimensions (LxWxH) | 8 x 5.25 x 2.5 po (kwv yees 20.3 x 13.3 x 6.35 cm) |
| Hom roj teeb | CR2032 Npib Cell |
| Kev sib txuas | SRAM AXS Wireless Protocol |
Warranty thiab Support
SRAM products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM website lossis daim npav warranty nrog rau koj cov khoom.
For technical support, troubleshooting assistance, or to locate an authorized service center, please visit the official SRAM support page: www.sram.com/en/sram/support