MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote User Manual

1. Taw qhia

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.

1.1 Product Overview

The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.

1.2 Ntim Cov Ntsiab Lus

• MiBOXER PUSH2-3 Wireless Dimming Remote
• Cov neeg siv phau ntawv
• Wiring terminals (pre-attached)

Daim duab 1: Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.

Daim duab 2: The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.

2. Cov ntaub ntawv kev nyab xeeb

Thov ua raws li kev tiv thaiv kev nyab xeeb hauv qab no txhawm rau tiv thaiv kev raug mob lossis kev puas tsuaj rau cov khoom:

• Tsis txhob tso lub cuab yeej kom ya raws lossis qhov kub thiab txias.
• Ensure all power is disconnected before installation or wiring.
• Cov cuab yeej no yog npaj rau kev siv sab hauv tsev nkaus xwb.
• Tsis txhob sim disassemble lossis hloov kho lub cuab yeej.
• Khaws kom deb ntawm cov menyuam yaus.

3. Khoom Nta

• 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
• 2.4GHz Wireless Technology: Provides reliable and interference-free communication with compatible LED systems.
• Broad Compatibility: Works with RGB, CCT, and single-color LED systems.
• Ergonomic Tsim: Features an easy-to-use layout for quick brightness adjustments.
• Roj teeb yuav tsum: Yuav tsum muaj CR2032 roj teeb (tsis suav nrog).
• Kev kho tsawg kawg nkaus: Designed for simple operation and long-lasting performance.

4. Cov lus qhia tshwj xeeb

Daim duab 3: Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).

Daim duab 4: Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.

5. Teeb tsa

5.1 Kev teeb tsa roj teeb

1. Nrhiav lub roj teeb hauv qab ntawm qhov chaw taws teeb.
2. Qhib lub hau npog.
3. Ntxig ib lub roj teeb CR2032, xyuas kom meej tias polarity raug (+/-).
4. Kaw lub roj teeb lub hau npog kom ruaj ntseg.

5.2 Kev Txuas Hluav Taws Xob thiab Kev Sib Txuas

The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).

Daim duab 5: Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.

1. Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
2. Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
3. Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
4. Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps and controls.
5. Once all connections are secure, restore power to the lighting system.

Daim duab 6: The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.

6. Cov lus qhia ua haujlwm

The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.

6.1 Pairing the Remote

To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:

1. Powering on the light fixture.
2. Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
3. The light fixture will flash to confirm successful pairing.

6.2 3-Zone Dimming Control

Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.

• Zone Xaiv: Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
• Dhuav: Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
• On/off: A short press of a zone button will typically toggle the lights in that zone on or off.

Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.

7. Kev tu

• Ntxuav: So cov chaw taws teeb nrog ib daim ntaub mos, qhuav. Tsis txhob siv cov tshuaj abrasive los yog cov kuab tshuaj.
• Hloov roj teeb: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
• Cia: If storing the remote for an extended period, remove the battery to prevent leakage.

8. Kev daws teeb meem

9. Warranty thiab Support

This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER website los yog hu rau koj lub khw muag khoom. Khaws koj daim ntawv yuav khoom ua pov thawj ntawm kev yuav khoom.

Manufacturer: Miboxer

Date First Available: November 5, 2024