DOUBLE E Jeep Licensed 1:14 Scale Pink Remote Control Car Instruction Manual

1. Cov ntaub ntawv tseem ceeb ntawm kev nyab xeeb

CEEB TOOM: CHOKING HAZARD - Cov khoom me me. Tsis yog rau cov menyuam yaus hnub nyoog qis dua 3 xyoos.

• Please remove batteries if the vehicle will not be used for a long time.
• The battery terminals should never be short-circuited.
• The battery should only be charged under adult supervision.
• Never put the batteries near fire or any source of heat; do not place them in water or leave in direct sunlight.
• Tsis txhob them cov roj teeb uas tsis tau them rov qab.
• Dispose of batteries according to local government regulations.
• Do not put the batteries together with daily trash.
• This product shall be charged for four to five hours. The supporting USB charger shall not be used for devices other than this product.
• Please note that rechargeable battery should be fully charged before first use.

Image: Close-up of the product packaging displaying battery warnings and general instructions.

2. Dab tsi hauv lub thawv

Your DOUBLE E Jeep Remote Control Car package includes the following items:

• 1 x Jeep Car (Pink)
• 1 x Chaw taws teeb tswj
• 1 x Rechargeable Battery Pack (rau lub tsheb)
• 1 x USB Charging Cable
• 1 x Screwdriver
• 1 x Cov khoom siv phau ntawv
• 2 x Sheets of DIY Stickers

Image: The DOUBLE E Jeep RC car, remote control, and two sheets of DIY stickers, indicating the contents of the package.

3. Teeb cov lus qhia

3.1. Them lub roj teeb tsheb

1. Locate the rechargeable battery pack and the USB charging cable.
2. Txuas lub pob roj teeb rau USB charging cable.
3. Plug the USB cable into a compatible USB power source (e.g., computer, USB wall adapter).
4. Allow the battery to charge for 4-5 hours for a full charge. The indicator light on the charger will typically change color or turn off when charging is complete.

3.2. Installing Batteries in the Car

1. Using the provided screwdriver, open the battery compartment cover on the underside of the car.
2. Insert the charged rechargeable battery pack, ensuring correct polarity.
3. Siv lub hau ntswj kom kaw lub hau roj teeb kom ruaj ntseg.

3.3. Txhim kho cov roj teeb hauv cov chaw taws teeb tswj

1. Open the battery cover at the bottom of the remote controller.
2. Insert 2 x 1.5V AA batteries, ensuring correct polarity. (AA batteries are not included).
3. Kaw lub roj teeb npog.

3.4. Applying DIY Stickers

Personalize your Jeep with the included DIY stickers. Carefully peel and apply them to the car's body as desired.

Image: Illustration of the 3.7V rechargeable battery and its connection to a USB charging cable, highlighting the charging process.

4. Cov lus qhia ua haujlwm

4.1. Fais fab rau thiab Pairing

1. Turn on the power switch on the car.
2. Qhib lub hwj chim hloov ntawm lub chaw taws teeb tswj.
3. The indicator light on the remote controller will flash slowly, then stay solid once paired.
4. One remote controller can only match with one car. After successful matching, there is no interference.
5. If the car is idle for 1 minute, it will enter sleeping state (light off of the indicator). Press any key to activate.
6. To re-pair with other cars or remote controllers, turn off the power of both devices and repeat the pairing process.

4.2. Cov Thawj Tswj

• Forward / Backward: Use the trigger on the remote control to move the car forward or backward.
• Tig: Use the steering wheel on the remote control to turn the car left or right.

4.3. Features and Performance

• 2.4GHz Tshuab: Allows multiple cars to be controlled simultaneously without interference, ideal for team play.
• Off-Road Peev Xwm: Equipped with strong motor drive, non-slip off-road tires, and independent suspension shocks for conquering various terrains.
• LED Teeb: Simulated LED headlights automatically illuminate, enhancing the driving experience, especially in low-light conditions.
• Kev tsim qauv ruaj khov: Features crash bumpers and a high-toughness ABS shell for resistance against falls and bumps.

Image: Three girls playing with the pink DOUBLE E Jeep RC car on a sandy beach, demonstrating its off-road capability and 2.4GHz multi-car control.

Image: A child operating the remote control for the pink RC car, with arrows indicating forward, backward, left, and right steering movements.

5. Kev tu

• Ntxuav: Wipe the car and remote control with a soft, dry cloth after each use to remove dust and dirt. Avoid using water or harsh chemicals.
• Kev kho roj teeb: Always remove batteries from both the car and the remote control if they will not be used for an extended period. Store batteries in a cool, dry place.
• Cia: Store the car and remote control in a dry environment, away from direct sunlight and extreme temperatures.
• Kev tshuaj xyuas: Periodically check for any loose parts, damaged wires, or worn tires. Replace or repair as necessary.

6. Kev daws teeb meem

• Lub tsheb tsis teb:
  • Xyuas kom lub tsheb thiab lub chaw taws teeb tswj tau qhib.
  • Check if batteries are correctly installed and fully charged in both devices.
  • Re-pair the remote control with the car by turning both off and then on again.
• Lub roj teeb luv luv:
  • Ensure the car's rechargeable battery is fully charged (4-5 hours).
  • Replace AA batteries in the remote control if they are depleted.
• Poor performance/control:
  • Ensure you are within the effective range of the remote control.
  • Check for any obstructions or debris in the wheels or suspension.
  • Verify that the steering trim on the remote control is properly adjusted.

7. Cov lus qhia tshwj xeeb

Image: Ib qho kev sib ze view of the pink RC car, pointing out its independent suspension shocks, stylish convertible top, simulated LED headlights, high-performance TPR off-road tires, and crash bumpers.

8. Warranty thiab Support

For any questions, concerns, or support needs regarding your DOUBLE E Jeep Remote Control Car, please contact the manufacturer directly.

• Chaw tsim tshuaj paus: DOUBLE E
• Xov tooj: 0754-85701666 : kuv