SMSL AS400 Lub Hwj Chim Amplifier DAC Lub mloog pob ntseg Amp Cov neeg siv phau ntawv

1. Taw qhia

This manual provides detailed instructions for the setup, operation, and maintenance of your SMSL AS400 Power Amplifier DAC Lub mloog pob ntseg Amp. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Daim duab 1: Pem hauv ntej view of the SMSL AS400 unit.

2. Khoom Nta

• Cov zis muaj zog: Integrates Cirrus Logic CS43131 DAC, Infineon MA5332MS digital amplifier, and XMOS XU-316. Supports PCM up to 32-bit/768kHz and DSD up to DSD256. Delivers 165W x 165W output (4Ω) with 0.003% THD+N distortion.
• 2.1 Subwoofer System: Features a dedicated subwoofer output for easy integration into a 2.1 channel audio system, providing enhanced bass.
• HDMI ARC TV Connection: Equipped with an HDMI (ARC) port for direct connection to compatible TVs, enabling synchronized audio and video.
• MM Phono Preampua neej nyob: Built-in low-noise MM phono stage for turntables, ensuring high-quality vinyl playback.
• Suab Customization: Offers 8 EQ settings (Direct, Tone, SDB, Bass, Super Bass, Rock, Soft, Clear) and 5 digital filters (Fast, Phase Compensation, Slow and Low Latency, Slow and Phase Compensation, Non-Oversampling) ib.
• Comprehensive Connectivity: Multiple input options including HDMI (ARC), Bluetooth, USB, Optical, Coaxial, Phono, and I2S. Features 4.4mm and 6.35mm headphone outputs.

Daim duab 2: Tshajview of SMSL AS400 key features.

3. Cov ntsiab lus ntawm pob

Xyuas kom tseeb tias txhua yam khoom muaj nyob hauv pob:

• SMSL AS400 Unit
• AC fais fab Cable
• USB Cable
• HDMI Cable
• Bluetooth Kav hlau txais xov
• Chaw taws teeb tswj
• Tus Neeg Siv Los Siv (cov ntawv no)
• Daim npav pabcuam

4. Khoom Tshajview

4.1 Pem Hauv Ntej Vaj Huam Sib Luag

Figure 3: Front panel layout.

• Zaub Screen: Shows current input, sample rate, volume, and menu options.
• Function Knob: Press to enter the menu, hold to exit the menu, rotate to change values or volume.
• 4.4mm Lub mloog pob ntseg Jack: Balanced headphone output.
• 6.35mm Lub mloog pob ntseg tso zis: Standard headphone output.

4.2 Lub Vaj Huam Sib Luag

Figure 4: Rear panel layout with input/output labels.

• PHONO Input (L/R): For connecting turntables with MM cartridges. Includes a grounding terminal.
• AUX Input (L/R): Standard analog RCA input.
• SW OUT (Subwoofer Output): For connecting an active subwoofer.
• COAXIAL nkag: Digital coaxial audio input.
• HDMI (ARC) Input: For connecting to a TV's Audio Return Channel port.
• Cov tswv yim USB: For connecting to a computer or other USB audio source.
• Optical Input: Digital optical audio input.
• Kav hlau txais xov Bluetooth: For wireless Bluetooth audio reception.
• SPEAKERS OUT (L/R): Speaker terminals for passive speakers.
• AC hwj chim tswv yim: Rau txuas lub hwj chim cable.

5. Teeb tsa

5.1 Txuas Cov Hais Lus

1. Ensure the AS400 is powered off.
2. Txuas koj cov neeg hais lus passive mus rau qhov Hais lus tawm terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for both left and right channels.

5.2 Txuas lub mloog pob ntseg

1. Connect your headphones to either the 4.4mm Lub mloog pob ntseg Jack lub 6.35mm Lub mloog pob ntseg tso zis ntawm vaj huam sib luag rau pem hauv ntej.

5.3 Txuas Cov Khoom Siv Suab

Connect your desired audio sources to the corresponding input ports on the rear panel:

• USB: Connect to a computer using the provided USB cable.
• Bluetooth: Attach the Bluetooth antenna. Select Bluetooth input on the device and pair with your source device.
• Optical / Coaxial: Connect digital audio sources like CD players or media streamers.
• RCA (AUX): Connect analog audio sources like CD players or other audio devices.
• Phono: Connect a turntable with an MM cartridge. Ensure the turntable's ground wire is connected to the AS400's grounding terminal.
• HDMI (ARC): Connect to your TV's HDMI ARC port using a compatible HDMI cable.

5.3.1 HDMI ARC Connection Details

Figure 5: HDMI ARC connection setup.

To connect an ARC compatible TV:

1. Connect an HDMI cable (19-pin, with HDMI logo indicating ARC compatibility) from your TV's HDMI (ARC) port to the AS400's HDMI (ARC) input.
2. Ensure the TV's HDMI IN port is labeled "ARC" or "eARC/ARC". If the port does not support ARC, this function cannot be used.
3. You may need to adjust TV settings for ARC. Refer to your TV's user manual.
4. This product supports digital audio input via HDMI ARC, not video input.
5. If your TV does not support ARC, connect the TV's audio output (Optical, Coaxial, or AUX) to the corresponding input on the AS400.
6. Due to ARC input protocol, the AS400's volume cannot be adjusted by the TV remote, nor does it support synchronous power on/off.
7. When using HDMI ARC, confirm the TV's audio output format is PCM.

6. Cov lus qhia ua haujlwm

6.1 Kev ua haujlwm yooj yim

1. Fais fab / Off: Use the power switch on the rear panel or the remote control.
2. Volume Control: Rotate the function knob on the front panel or use the volume buttons on the remote.
3. Input Xaiv: Press the function knob to enter the menu, then rotate to select 'Input'. Alternatively, use the input selection buttons on the remote.

6.2 Ntawv qhia zaub mov Navigation

The function knob is used for menu navigation:

• Xovxwm: Enter the menu or confirm a selection.
• Tuav: Tawm ntawm cov ntawv qhia zaub mov tam sim no.
• Tig: Scroll through menu options or adjust values.

6.3 EQ and Filter Settings

Figure 6: Menu options for EQ and tone control.

Access the 'SETUP MENU' by pressing the function knob. Navigate to 'EQ', 'Treble', 'Bass', or 'Filter' to customize your audio experience:

• EQ Hom: Select from Direct, Tone, SDB, Bass, Super Bass, Rock, Soft, and Clear.
• Cov lim dej: Choose from Fast, Phase Compensation, Slow and Low Latency, Slow and Phase Compensation, and Non-Oversampling.

6.4 MQA Playback

Figure 7: MQA and MQA-CD support.

The AS400 supports full MQA and MQA-CD decoding, allowing for native playback of MQA streams/files and MQA-CDs. Connect your MQA-enabled source via USB, Optical, or Coaxial inputs for high-resolution audio.

7. Cov lus qhia tshwj xeeb

Daim duab 8: Cov khoom qhia ntxaws ntxaws.

8. Kev daws teeb meem

8.1 HDMI ARC Function

• Q1: The ARC input is connected to the TV, but the TV does not recognize the device or there is no sound.
  A1: The ARC input needs to be connected to the HDMI ARC interface of the TV. The output mode of the TV should be set to "ARC/ARC+TV speakers".
• Q2: Can the TV remote control adjust the volume of this product?
  A2: Tsis txhawb.
• Q3: Will the product synchronize on/off after turning on/off the TV?
  A3: Not supported. When using HDMI ARC input, this product needs to be restarted when the TV is turned off and then turned on again.
• Q4: What should I do if there is no sound after connecting the TV to the product?
  A4: When using this product, please confirm that the audio output format of the TV is PCM.
• Q5: Does it support connecting to a TV set-top box?
  A5: Tsis txhawb.

8.2 Kev daws teeb meem dav dav

• Tsis muaj zog: Ensure the AC power cable is securely connected to both the AS400 and a working power outlet. Check the power switch on the rear panel.
• No Sound from Speakers/Headphones: Verify the correct input source is selected. Check all cable connections. Ensure volume is not muted or set too low. Confirm speakers/headphones are properly connected.
• Distorted suab: Check cable connections for looseness or damage. Ensure the audio source is not overdriving the input. Try a different audio source or cable.
• Cov teeb meem kev sib txuas Bluetooth: Ensure the Bluetooth antenna is attached. Confirm the AS400 is in Bluetooth pairing mode and your device's Bluetooth is enabled and searching. Try unpairing and re-pairing the device.

9. Kev tu

• Ntxuav: Siv daim ntaub mos mos thiab qhuav los ntxuav lub tshuab. Tsis txhob siv cov tshuaj ntxuav kua lossis cov tshuaj yaj.
• Qhov chaw: Place the unit on a stable, level surface with adequate ventilation. Avoid direct sunlight, heat sources, and excessive moisture.
• Lub zog: Yog tias tsis siv lub tshuab ntev, tshem lub xov hluav taws xob ntawm lub qhov hluav taws xob ntawm phab ntsa.

10. Warranty & Kev Pab Txhawb

For warranty information and technical support, please refer to the service card included in your package or contact the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.