Jonsbo N10 Mini-ITX PC Case User Manual

1. Taw qhia

The Jonsbo N10 Mini-ITX PC Case is designed for users seeking a compact, functional, and elegantly designed enclosure for minimalist PC systems. It is suitable for space-saving office PCs, quiet HTPCs (Home Theater Personal Computers), or compact NAS (Network Attached Storage) systems. This manual provides essential information for the proper assembly, operation, and maintenance of your Jonsbo N10 case.

Figure 1: Jonsbo N10 Mini-ITX PC Case in a typical desktop setup.

2. Cov ntaub ntawv kev nyab xeeb

• Ua ntej koj yuav tsum txuas lossis tshem tawm cov khoom siv, koj yuav tsum tshem lub hwj chim ntawm lub qhov hluav taws xob ntawm phab ntsa.
• Ua tib zoo tuav txhua yam khoom kom tiv thaiv kev puas tsuaj los ntawm hluav taws xob static. Xav txog kev siv txoj siv sia dab teg uas tiv thaiv hluav taws xob static.
• Khaws cov khoom me me thiab cov ntsia hlau kom deb ntawm cov menyuam yaus.
• Xyuas kom muaj cua nkag tau zoo nyob ib puag ncig lub thawv kom tiv thaiv kom tsis txhob kub dhau.
• Tsis txhob sim hloov kho lub thawv lossis nws cov khoom, vim qhov no yuav ua rau koj lub warranty tsis ua haujlwm thiab ua rau muaj kev pheej hmoo ntawm kev nyab xeeb.

3. Cov ntsiab lus ntawm pob

Thov xyuas kom meej tias tag nrho cov khoom hauv qab no suav nrog hauv koj pob:

• Jonsbo N10 Mini-ITX PC Case
• 2 x Pre-installed Cooling Fans
• Accessory box with screws and mounting hardware

Daim duab 2: tawg view showing the main components of the Jonsbo N10 case.

4. Kev teeb tsa thiab kev teeb tsa

4.1 Cheeb Tsam Tshajview

The Jonsbo N10 case is designed for Mini-ITX motherboards and compact components. Familiarize yourself with the internal layout before beginning assembly.

Daim duab 3: Sab hauv view of the Jonsbo N10 case, illustrating component placement.

4.2 Kev teeb tsa Motherboard

1. Remove the side panels of the case.
2. Install your Mini-ITX motherboard into the designated area. Ensure the I/O shield is properly seated.
3. Ruaj ntseg lub motherboard nrog cov screws muab.
4. Install your CPU and CPU cooler. Note that the maximum CPU cooler height supported is 38 XNUMXmm. This case is optimized for CPUs with integrated graphics (iGPU) and does not support dedicated graphics cards.

4.3 Kev Teeb Tsa Cia Khoom

The Jonsbo N10 supports up to four 2.5-inch SSDs or HDDs.

1. Locate the 2.5-inch drive bays. These are typically found on a removable bracket or directly on the chassis.
2. Mount your 2.5-inch SSDs or HDDs onto the bracket using the provided screws.
3. Secure the bracket back into the case.

Figure 4: Installation process for 2.5-inch storage drives.

4.4 Kev Teeb tsa Fais Fab

The case supports 1U-Flex power supplies up to 150 mm in length.

1. Identify the power supply mounting area, typically at the bottom of the case.
2. Slide the 1U-Flex power supply into its designated slot.
3. Ruaj ntseg lub zog muab hluav taws xob nrog cov ntsia hlau los ntawm tom qab ntawm lub thawv.
4. Connect the necessary power cables to your motherboard and storage devices.

Figure 5: Power supply unit installation guide.

4.5 Fan Connections

The Jonsbo N10 comes with two pre-installed cooling fans. Connect their power cables to the appropriate fan headers on your motherboard.

4.6 Kev Tswj Xyuas Cable

Due to the compact nature of the case, careful cable management is crucial for optimal airflow and aesthetics. Route cables neatly using zip ties or Velcro straps where possible.

5. Cov lus qhia ua haujlwm

Once all components are installed and secured, and all cables are connected:

1. Replace the side panels and secure them.
2. Connect your monitor, keyboard, mouse, and other peripherals.
3. Connect the power cable to the power supply and then to a wall outlet.
4. Press the power button on the front of the case to start your system.

Daim duab 6: Sab saum toj view of the Jonsbo N10, highlighting the power button and front panel.

6. Kev tu

• Ntxuav: Regularly clean the exterior of the case with a soft, dry cloth. For dust accumulation inside, use compressed air to gently clear vents and components. Ensure the system is powered off and unplugged before cleaning.
• Ntxuam Check: Periodically check the pre-installed fans for dust buildup or unusual noises. Clean them as needed to maintain optimal airflow.
• Qhov cua: Ensure that the case's ventilation holes are not obstructed to allow for proper heat dissipation.

7. Kev daws teeb meem

• Lub kaw lus tsis muaj zog: Double-check all power connections, including the power supply to the wall, the motherboard 24-pin connector, and the CPU power connector. Ensure the power button cable is correctly connected to the motherboard.
• Cov kiv cua ntau dhau: While the case includes pre-installed fans, some users may find them audible. If fan noise is a concern, consider replacing the pre-installed fans with quieter aftermarket alternatives (e.g., Noctua fans). Ensure fans are free of dust and properly secured.
• Overheating: Verify that all fans are spinning correctly and that the case's ventilation is unobstructed. Ensure your CPU cooler is properly seated and making good contact with the CPU.
• USB ports not working: Check the internal USB 3.0 header connection from the front panel to the motherboard.

8. Cov lus qhia tshwj xeeb

9. Warranty thiab Support

The Jonsbo N10 PC Case comes with a 2 xyoo khoom warranty. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Jonsbo weblub vev xaib. Thov khaws koj daim ntawv pov thawj yuav khoom rau lub hom phiaj lav.