1. Khoom Tshajview
The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Duab 1: Pem hauv ntej view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing its robust metal casing and grill.
Cov yam ntxwv tseem ceeb:
- Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
- Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
- Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
- Kev tiv thaiv overheat: Integrated safety feature to prevent overheating.
2. Cov ntaub ntawv kev nyab xeeb
Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Kev teeb tsa hluav taws xob: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Grounding: This heater must be properly grounded to reduce the risk of electric shock.
- Qhov chaw: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
- Kev tiv thaiv overheat: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
- Tsis Tau Cover: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
- Kev tu: Tshem tawm lub hwj chim ua ntej ua kev tu lossis tu.
3. Cov ntsiab lus ntawm pob
Xyuas kom tseeb tias tag nrho cov khoom muaj nyob thiab tsis muaj kev puas tsuaj thaum qhib pob:
- KING LPWV2715-CT24 Vandal Resistant Heater Unit
- Mounting Hardware (typically included)
- Instruction Manual (cov ntaub ntawv no)
If any items are missing or damaged, contact your supplier immediately.
4. Kev teeb tsa
CEEB TOOM: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.
4.1 Chaw Nruab Nruab Nruab Nruab
- This heater is designed for indoor, wall-mount installation.
- Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
- Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).
4.2 Kev sib txuas hluav taws xob
- The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
- Cov cua sov kos 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
- Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
- Xyuas kom txhua qhov kev sib txuas yog nruj thiab ruaj ntseg.
5. Kev ua haujlwm
Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.
5.1 Power Switch Settings
- Tawm: The heater is completely off, and no heat or fan operation will occur.
- KAWG: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
- HEAT: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).
5.2 qwtage Selection (Pic-A-Watt)
The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.
6. Kev tu
Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Ntxuav: Siv ib daim ntaub mos mos los ntxuav sab nraud ntawm lub tshuab cua sov tas li,amp daim ntaub. Tsis txhob siv cov tshuaj abrasive los yog cov kuab tshuaj.
- Cov Qhov Nkag/Qhov Tawm Cua: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
- Kev tshuaj xyuas: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.
7. Kev daws teeb meem
Ua ntej hu rau cov neeg siv khoom txhawb nqa, review cov teeb meem thiab kev daws teeb meem hauv qab no:
| Teeb meem | Ua Tau | Kev daws |
|---|---|---|
| Lub rhaub tsis qhib. | No power supply; Circuit breaker tripped; Loose wiring. | Check circuit breaker; Ensure power switch is in 'HEAT' or 'FAN' position; Consult a qualified electrician to check wiring. |
| Heater produces no heat, but fan runs. | Switch in 'FAN' position; Heating elements failed; Overheat protection activated. | Set switch to 'HEAT'; Allow heater to cool if overheat protection tripped; Contact a qualified electrician for element inspection. |
| Lub tshuab cua sov rov qhib thiab kaw ntau zaus. | Improper thermostat setting (if applicable); Restricted airflow; Overheat protection cycling. | Adjust thermostat setting; Clear any obstructions from air inlets/outlets; Ensure proper clearances. |
| Unusual noises or odors. | Loose components; Dust accumulation on elements; Motor issue. | Disconnect power immediately; Inspect for loose parts; Clean heater; Contact a qualified electrician for inspection. |
Yog tias qhov teeb meem tshwm sim tom qab sim cov kev daws teeb meem no, hu rau cov neeg siv khoom txhawb nqa lossis tus kws tshaj lij hluav taws xob tsim nyog.
8. Cov lus qhia tshwj xeeb
| Specification | Paub meej |
|---|---|
| Hom | Huab tais |
| Qauv nab npawb | LPWV2715-CT24 |
| Voltage | 277 Volts |
| Ampnpau taws | 5.4 Amps |
| Wattage | 1500 Watts |
| Khoom Dimensions (D x W x H) | 4" H x 13.75" W x 22.75" H |
| Yam Nyhav | 36 puj |
| Mounting Hom | Phab ntsa Mount |
| Hom roj | Hluav taws xob |
| Kev siv sab hauv / sab nraum zoov | Sab hauv |
| Tshwj xeeb Feature | Kev tiv thaiv overheat |
| UPC | 093319183731 |
| ASIN | B0G3SWW2XK |
9. Warranty thiab Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING webqhov chaw. Khaws koj daim ntawv yuav khoom ua pov thawj ntawm kev yuav khoom rau kev lees paub.
Chaw tsim tshuaj paus: KING Electrical Manufacturing
Webqhov chaw: www.king-electric.com (Ex ibampqhov txuas, thov txheeb xyuas qhov tseeb webqhov chaw)