CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) Instruction Manual

1. Taw qhia

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The CRAFTSMAN Select 24 is equipped with a 208cc 4-cycle OHV engine and features a 24-inch clearing width and 20-inch intake height. It includes a push-button electric start, self-propelled drive with 6 forward and 2 reverse speeds, and 12-inch sawtooth steel augers for effective snow and ice removal. The 200-degree chute rotation allows for controlled snow discharge up to 40 feet.

Figure 1: CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. This image shows the complete snow blower from a front-side angle, highlighting its red body, black engine, and large wheels.

2. Cov ntaub ntawv kev nyab xeeb

WARNING: Read and understand all safety warnings and instructions before operating this snow blower. Failure to follow these instructions may result in serious injury or death.

Potential hazards associated with snow blowers include rotating parts, carbon monoxide poisoning from gasoline models, and the need for appropriate personal protective equipment (PPE) such as gloves and eye protection. Always adhere to manufacturer guidelines for handling, operation, and storage.

Txoj Cai Kev Nyab Xeeb General:

• Always wear appropriate eye and hearing protection.
• Khaws ob txhais tes, taw, thiab khaub ncaws kom deb ntawm qhov chaw txav mus los.
• Never operate the snow blower indoors or in poorly ventilated areas due to carbon monoxide risk.
• Ensure the area to be cleared is free of obstacles before starting.
• Tsis txhob tso cai rau cov menyuam yaus lossis cov neeg tsis tau txais kev cob qhia ua haujlwm lub tshuab.
• Turn off the engine and disconnect the spark plug wire before performing any maintenance or clearing clogs.
• Ntxiv roj rau hauv ib qho chaw uas muaj cua nkag tau zoo thiab tua lub cav thiab txias.

3. Kev teeb tsa thiab kev sib dhos

Your snow blower may require some assembly upon arrival. Refer to the separate assembly guide for detailed instructions. Key steps typically include:

1. Handlebar Assembly: Attach the upper handlebar to the lower handlebar using the provided hardware. Ensure all cables and wires are routed correctly and not pinched.
2. Chute Assembly: Secure the discharge chute and its rotation mechanism. Verify smooth operation of the chute control lever.
3. Skid Shoes Adjustment: Adjust the poly skid shoes to the desired height. For most conditions, set them slightly below the auger housing to prevent scraping the surface.
4. Kev kuaj kua dej:
   • Cav Roj: Check the engine oil level and fill with recommended oil (refer to engine manual for type and capacity).
   • Roj: Fill the fuel tank with fresh, unleaded gasoline. Do not mix oil with gasoline.

Figure 2: Product dimensions of the CRAFTSMAN Select 24" Snow Blower. This image illustrates the overall length (44.75"), width (26.75"), and height (32.8") of the unit, useful for planning storage and transport.

4. Cov lus qhia ua haujlwm

4.1. Pre-Operation Checklist

• Xyuas kom tseeb tias txhua lub txiv ntoo, bolts, thiab screws nruj nreem.
• Check engine oil and fuel levels.
• Inspect the area for debris that could be thrown by the auger.
• Verify that the discharge chute is clear and properly aimed.

4.2. Pib lub cav

The CRAFTSMAN Select 24 features a push-button electric start, eliminating the need for manual pull-starting.

1. Txuas lub zog: Plug an extension cord into the electric start receptacle on the engine.
2. Prime Engine: Press the primer bulb 3-5 times (more if temperature is below 0°F).
3. Teem Choke: Move the choke lever to the "FULL CHOKE" position.
4. Pib: Press and hold the electric start button until the engine starts (maximum 5 seconds).
5. Disconnect hwj chim: Once the engine starts, release the button and unplug the extension cord.
6. Adjust Choke: Gradually move the choke lever to the "RUN" position as the engine warms up.

Figure 3: Detail of the push-button electric start mechanism. This image shows the electric start receptacle and the red push-button, simplifying engine ignition in cold weather.

Figure 4: Close-up of the fuel cap and primer bulb. This image highlights the components used for fueling and priming the engine before starting.

4.3. Kev khiav haujlwm Snow Blower

The snow blower features a self-propelled drive system with multiple speeds and adjustable chute control.

• Koom Drive: Squeeze the drive control lever to engage the self-propelled wheels.
• Xaiv Ceev: Use the speed selector lever to choose from 6 forward and 2 reverse speeds. Adjust speed based on snow depth and density.
• Engage Auger: Squeeze the auger control lever to activate the augers and impeller.
• Adjust Chute: Use the chute control crank to rotate the discharge chute up to 200 degrees, directing snow away from cleared areas. The durable steel chute can throw snow up to 40 feet.

Figure 5: Detail of the chute control mechanism. This image shows the crank used to adjust the direction of snow discharge, offering up to 200 degrees of rotation.

Figure 6: The 12-inch sawtooth auger actively clearing snow. This image demonstrates the snow blower's capability to cut through and clear heavy snow and ice.

Figure 7: A person operating the CRAFTSMAN Select 24" Snow Blower to clear a driveway. This image shows the snow blower in action, demonstrating its ease of use and effective snow removal.

4.4. nres lub cav

To stop the engine, release both the drive control lever and the auger control lever. Then, move the engine switch to the "OFF" position.

5. Kev tu

Kev saib xyuas tsis tu ncua ua kom pom kev ua haujlwm tau zoo thiab txuas ntxiv lub neej ntawm koj lub tshuab daus daus.

5.1. Tom qab siv txhua

• Clear any snow or ice from the auger housing and discharge chute.
• Wipe down the exterior of the machine.
• Tshawb xyuas cov fasteners xoob.

5.2. Seasonal Maintenance

• Cav Roj Hloov: Change engine oil after the first 5 hours of operation, then every 25 hours or annually.
• Spark Plug: Tshawb xyuas thiab ntxuav lossis hloov lub tshuab hluav taws xob txhua xyoo.
• Roj System: At the end of the season, drain the fuel tank or use a fuel stabilizer to prevent fuel degradation. Run the engine until it runs out of fuel if not using a stabilizer.
• Lubrication: Lubricate all moving parts as indicated in the full owner's manual.
• Skid Shoes and Scraper Bar: Tshawb xyuas qhov hnav thiab hloov yog tias tsim nyog.

5.3. Cia

When storing the snow blower for extended periods:

• Ntxuav lub tshuab kom huv si.
• Perform all seasonal maintenance.
• Store in a dry, protected area, away from direct sunlight and extreme temperatures.
• Ensure the fuel tank is either empty or filled with stabilized fuel.

6. Kev daws teeb meem

Ntu no hais txog cov teeb meem uas koj yuav ntsib. Yog xav tau cov teeb meem nyuaj dua, nrog tus kws kho tshuab uas tsim nyog tham.

7. Cov lus qhia tshwj xeeb

8. Warranty thiab Support

The CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) comes with a peb-xyoo txwv warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official CRAFTSMAN webqhov chaw.

For technical assistance, parts, or warranty claims, please contact CRAFTSMAN customer support. Contact information can typically be found on the CRAFTSMAN website los yog nyob rau hauv cov khoom ntim.

Chaw tsim tshuaj paus: MTD cov khoom