SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER

Specifications

• Khoom npe: C4 Link2 Programmer
• Version: 1.03
• Hnub tim: Kaum Ib Hlis 7, 2025

Tshajview

• Cov ntaub ntawv no muab cov lus qhia ua ntu zus rau kev rub tawm, txhim kho, thiab siv Link2 Programmer nrog C4 controllers. Nws piav qhia yuav ua li cas thauj software mus rau C4 maub los siv Link2 Programmer.

Cov cuab yeej xav tau rau Software Programming

Cov cuab yeej hauv qab no yuav tsum tau ua haujlwm rau software:

1. Lub laptop nrog lub Windows-based operating system.
2. Link2 Programmer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webtxuas mus saib cov software tshiab thiab luam tawm.

Daim ntawv thov Download lus qhia

Txhawm rau rub tawm software mus rau Smartrise maub los, daim ntawv thov programming yuav tsum rub tawm mus rau lub laptop. Daim ntawv thov no muaj nyob rau ntawm lub flash drive. Ua raws li cov kauj ruam no mus download tau daim ntawv thov C4 Link2 Programmer:

1. Qhib lub flash drive.
2. Navigate to (5) – Smartrise Programs and open the folder.
3. Nrhiav thiab qhib C4 Programmer folder.
4. Rub tawm thiab khiav ob daim ntawv thov ntawm lub laptop. Qee lub laptops yuav muaj firewalls uas tiv thaiv cov ntawv thov los ntawm kev rub tawm. Yog xav tau kev pab, hu rau tus thawj tswj qhov system.
5. Thaum ua tiav, ob daim ntawv thov yuav tsum tshwm sim ntawm lub desktop.
   CEEB TOOM: MCUXpresso tsis tas yuav qhib, tsuas yog ntsia ntawm lub laptop.

Software Loading Instructions

Txhawm rau kom ua haujlwm tau zoo, tus tswj software yuav tsum tau thauj mus rau Smartrise maub los siv Link2 Programmer. Ua raws li cov kauj ruam hauv qab no kom ua tiav cov txheej txheem:

1. Txuas lub Link2 Programmer rau lub laptop ntawm qhov chaw nres nkoj USB.
2. Qhib C4 Link2 Programmer los ntawm ob-nias nws lub cim. Daim ntawv thov yuav hloov kho mus rau qhov tseeb version yog tias txuas nrog hauv internet. Xyuas kom meej tias daim ntawv thov yog nyob rau hnub ua ntej yuav mus.
3. Xauj rau tus tswj software:
   • Qhib (1) – Controller Software.
   • Xaiv lub nplaub tshev nrog lub npe txoj haujlwm.
   • Xaiv lub Tsheb thauj khoom software rau.
   • Nyem Xaiv Folder nyob hauv qab ntawm lub qhov rais.
4. Xaiv lub processor los hloov kho siv cov ntawv qhia zaub mov. Cov txheej txheem tuaj yeem hloov kho hauv txhua qhov kev txiav txim:
   • MR A: MR MCUA
   • MR B: MR MCUB
   • SRU A: CT and COP MCUA
   • SRU B: CT and COP MCUB
   • Riser/Expansion: Riser/Expansion board
   • Processor kev sib txuas tuaj yeem pom ntawm lub rooj tsavxwm.
5. Pib lub software loading txheej txheem los ntawm txhaj lub Start khawm.
   • Tseem ceeb: Thaum lub programming MR SRU, lwm lub tsheb hauv pab pawg yuav raug cuam tshuam. Txhawm rau tiv thaiv qhov no, tshem tawm cov pab pawg terminals ntawm lub rooj tsavxwm.
6. Lub qhov rais tshiab yuav tshwm sim, thiab cov software rub tawm yuav pib. Thaum ua tiav, cov lus pom zoo yuav tshwm sim.CEEB TOOM: Yog tias lub software tsis rub tawm, sim ua cov hauv qab no:
   • Rov sim cov txheej txheem.
   • Siv lwm qhov chaw nres nkoj USB.
   • Fais fab voj voog lub maub los.
   • Xyuas kom tseeb tias Link2 Programmer txuas nrog zoo.
   • Restart lub laptop.
   • Sim sib txawv Link2 Programmer.
   • Siv lub laptop sib txawv.
   • Hu rau Smartrise rau kev pab.
7. Nyem Kho kom raug mus txuas ntxiv thauj khoom software rau cov txheej txheem ntxiv thiab ua raws cov kauj ruam dhau los.
8. Thaum tag nrho cov software uploads tiav, rov txuas cov pab pawg terminals thiab lub voj voog fais fab ntawm tus maub los.
9. Txheeb xyuas cov software version hauv Main Menu | Txog | Vers.
10. Scroll cia rau view tag nrho cov kev xaiv thiab paub meej tias qhov xav tau version yog tso tawm kom pom.
    • YOB NPE
    • SRU BOARD
    • CAR LABEL
    • JOB ID: ########
    • VERS. ##.##.##
    • © 2023 SMARTRISE
11. Default to factory settings by navigating to Main Menu | Setup | Miscellaneous | Default | Default Factory.

Restoring a Bricked Processor

In the event of a bricked processor, follow the steps below to restore functionality:

1. Locate the two jumpers positioned beneath the LCD display – one jumper corresponds to each processor.
2. Connect the jumper associated with the affected (bricked) processor to establish communication.
3. Power cycle the board.
4. Once power is restored, program the processor using a release file that already includes a bootloader.
5. Start the application once programming is complete.
6. Remove the jumper used for recovery.
7. Power cycle the board again to finalize the restoration.

FAQs

Q: What should I do if I encounter issues with downloading the programming application?

A: If you face problems downloading the programming application due to firewalls or other reasons, contact your system administrator for assistance.

Cov ntaub ntawv / Cov ntaub ntawv

SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER [ua pdf] Cov neeg siv phau ntawv qhia VERSION 1.03 C4 LINK2 PROGRAMMER, VERSION 1.03, C4 LINK2 PROGRAMMER, LINK2 PROGRAMMER, PROGRAMMER

Cov ntaub ntawv

• Cov neeg siv phau ntawv