ADQ Volta Electronic Code Lock Instruction Manual

ADQ Volta Electronic Code Lock

Specifications

• Hom Locinox
• Khoom Volta
• Qauv: LNKQ30C1LVCADRSILV
• Kev ntsuas 
  • U = 4.5 VDC
  • Kuv = 5mA
• Chaw tsim tshuaj paus: Ariel Door Gears Ltd.
• Qhov ntev:
  • Single -C1L: 224mm x 60mm (8-13/16″ x 2-3/8″)
  • Double -C2L: 226mm x 60mm (8-7/8″ x 2-3/8″)
• Max. Handle Length: 400mm (15-3/4 ")
• Hex Loj: 6mm thiab 3mm

Cov lus qhia siv khoom

Product Description
The VOLTA door gear system by Ariel Door Gears Ltd. is designed for both single and double door configurations.

Programming
The programming instructions for the VOLTA system can be found in the user manual provided with the product. Follow the steps carefully to set up the system according to your preferences.

Factory Reset Upon Loss of Master Pin
If you lose the master pin, refer to the user manual for instructions on how to perform a factory reset to regain access to the system.

Functioning of VOLTA
The VOLTA system operates smoothly to facilitate the opening and closing of doors. Ensure all components are installed correctly for optimal performance.

Kev tu
Regular maintenance is essential to ensure the VOLTA system functions properly. Clean and lubricate moving parts as recommended in the user manual.

Cov ntaub ntawv dav dav
For any general queries or additional information about the VOLTA system, refer to the manufacturer’s website lossis hu rau lawv cov neeg siv khoom txhawb nqa.

Warranty
Check the warranty details provided by Ariel Door Gears Ltd. to understand the coverage and duration of the warranty for the VOLTA system.

Ariel Qhov Rooj Gears Ltd.
Unit 1A, Dunboyne Business Park,  Dunboyne, Co. Meath, A86 W310

Hu rau:

• Xov tooj: + 353 1 8333168
• Email: info@adg.ie ib
• Webqhov chaw: www.adg.ie

ASSEMBLY cov lus qhia

Congratulations on the purchase of your Volta

KHOOM PLIG

• Volta is a high-quality battery-operated electronic code lock with an aluminium housing. Volta’s energy-efficient design makes it very easy to add access control to any gate with a minimal need for maintenance.
• Volta is equipped with a weather-protected illuminated electronic code panel on one or two sides of the gate. Using these code panels, PIN codes can be easily added, modified or removed. Up to 100 codes can be programmed. Different codes can be used for entry and exit, and the system also supports permanently open codes.

PROGRAMMING

TSEV KAWM NTAWV QHIA

• Volta offers 2 alternative methods to enter the programming menu: by using the Master PIN code (default value ‘12345’), or by using the key contact:
• Nias [#] rau 5 sec, [#] yuav pib flashing
• Either enter the Master PIN code and press [#], or turn and hold the key contact in the locking direction for a seconds

• If a wrong Master PIN is entered, the programming mode ends, and the time-out procedure as described in 4.2 applies

CEEB TOOM.

• For safety reasons, we strongly recommend changing the Master PIN upon first use
• If only [#] is lit, you are in the main menu of the programming mode

Xaiv cov ntawv qhia zaub mov thiab paub meej nrog [#]. Cov zaub mov hauv qab no muaj:

• [9] ▶setup Master PIN – 2.2
• [1] ▶manage PIN codes – 2.3
• [2] ▶manage permanently open codes – 2.4
• [3] ▶setup switching duration – 2.5
• [4] ▶setup free exit mode – 2.6
• [5] ▶setup lighting mode – 2.7
• [0]▶factory reset – 2.8
• See the next paragraphs for detailed information

The programming mode ends automatically when there is no activity for 60 seconds

• Tom qab xaiv cov ntawv qhia zaub mov, nws tuaj yeem rov qab mus rau cov ntawv qhia zaub mov tseem ceeb los ntawm nias tus yuam sij [C]
• Nias [C] rau 5 vib nas this kom tawm ntawm lub programming hom

SETUP Master PIN [9]

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Nias [9] thiab paub meej nrog [#]
• [9] thiab [#] yog ob qho tib si lit
• Lub neej ntawd Master PIN yog 12345. Nws ib txwm yuav tsum yog tus lej 5
• Sau tus lej 5 tus lej Master PIN tshiab thiab nias [#]
• Repeat the previous step to confirm the new Master PIN
• If both codes are equal, all LEDs will light briefly, and you will return to the main menu of the programming mode

MANAGE PIN CODE [1]

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated

A maximum of 100 different PIN codes can be programmed

• Nias [1] thiab paub meej nrog [#]
• [1] thiab [#] yog ob qho tib si lit
• Enter a new PIN code (4-8 digits) and confirm with [#]
• Nyob rau hauv rooj plaub ntawm tus lej tshiab, tus lej yuav tsum tau rov ua dua thiab lees paub nrog [#]
• The lights of buttons [5] and/or [7] indicate on which side of the lock the code is valid. [7] is used for the side the user is currently using, while [5] is used for the other side. The Volta model with a keypad on one side shows only  option [7]
• Pressing [5] and/or [7] will deselect (flashing) or select (permanently on) the corresponding side
• Nias [#] kom paub meej
• You will return to the main menu of the programming mode;[#] will remain lit. Press [C] for 5 seconds to exit the programming mode

When two different codes or a wrong code length is entered, all LEDs flash two times, indicating the code setting hasn’t been saved. Try again. [1] will remain lit

A code can be removed by deselecting [5] and/or [7] before confirmation

TXOJ CAI TXOJ CAI RAU HAUV PAUB TIAS [2]
PIN codes generated using menu [1] (manage PIN codes) will unlock the lock for a predefined duration, as configured in menu [3] (‘setup switching duration’). In contrast, a ‘permanently open’ code has no predefined duration to remain open, but will remain open until the same code (or another permanently open code) is entered.

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Nias [2] thiab paub meej nrog [#]
• [2] thiab [#] yog ob qho tib si lit
• Sau tus lej PIN tshiab thiab paub meej nrog [#]
• Nyob rau hauv rooj plaub ntawm tus lej tshiab, tus lej yuav tsum tau rov ua dua thiab lees paub nrog [#]
• The lights of buttons [5] and/or [7] indicate which side of the lock the code is valid. [7] is used for the side the user is currently using, while [5] is used for the other side. The Volta model with a keypad on one side shows only option [7]
• Pressing [5] and/or [7] will deselect (flashing) or select (permanently on) the corresponding side
• Nias [#] kom paub meej
• Koj yuav rov qab mus rau cov ntawv qhia zaub mov tseem ceeb ntawm hom programming

When two different codes or a wrong code length is entered, all LEDs flash two times, indicating the code setting hasn’t been saved. Try again. [2] will remain lit

A code can be removed by ddeselecting[5] and/or [7] before confirmation

SETUP HU RAU LUB SIJ HAWM [3]

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Nias [3] thiab paub meej nrog [#]
• [3] thiab [#] yog ob qho tib si lit
• Enter a value between 1 and 99, and confirm with [#]. When all LEDs flash, your choice is saved
• Koj yuav rov qab mus rau lub ntsiab zaub mov

In case an invalid time is entered, all LEDs flash two times. Menu [3] remains activated

The default time is set at 8 seconds

SETUP DAIM NTAWV THOV KEV PAB CUAM [4]
Cov ntawv qhia zaub mov pub dawb-tawm tawm tso cai rau kev teeb tsa ib sab ntawm lub xauv hauv 'free tawm hom'. Nyob rau sab dawb-tawm, nkag mus rau tus lej PIN tsis tas yuav tsum tau: tsuas yog nias ib tus yuam sij yuav qhib lub xauv rau lub sijhawm ua ntej.

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Nias [4] thiab paub meej nrog [#]
• [4] thiab [#] yog ob qho tib si lit
• The lights of button [5] and/or [7] indicate which side of the lock is configured in free exit mode.
• [7] is used for the side the user is currently using, while [5] is used for the other side. The Volta model with a keypad on one side shows only option [7]
• Pressing [5] and/or [7] will deselect (flashing) or select (permanently on) the corresponding side to be configured in free-exit mode
• Qhov kev xaiv tau lees paub los ntawm nias lub [#] tus yuam sij
• Koj yuav rov qab mus rau cov ntawv qhia zaub mov tseem ceeb ntawm hom programming

The free-exit mode can be disabled by ddeselecting[5] and [7] before confirmation

TSEEM CEEB HOM [5]

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Nias [5] thiab paub meej nrog [#]
• [5] thiab [#] yog ob qho tib si lit
• Xaiv hom teeb pom kev zoo uas xav tau:
  1. Auto dim (default):
     • During normal operation, backlights are off. As soon as a button is pressed, they go to full brightness. After 5 seconds of inactivity, the lighting is switched off
  2. Backlight disabled:
     • Cov backlights yuav tsis teeb thaum nias lub pob
• Press [1] or [2] and confirm with [#]. When all LEDs flash, your choice is saved
• Koj yuav rov qab mus rau lub ntsiab zaub mov

In case an invalid number is entered, all LEDs flash two times. Try again. Menu [5] remains activated

Factory rov pib dua [0]

• Nkag mus rau qhov programming hom (saib 2.1)
  • Nias [#] rau 5 sec, [#] yuav pib flashing
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Nias [0] thiab paub meej nrog [#]
• [0] will flash rapidly to indicate that an irreversible action can be taken
• Enter the Master PIN and confirm by holding [#] for 2 seconds
• When all LEDs flash, the factory reset is complete. All settings are restored to default values

RESETTING THEMaster PIN thaum poob ntawm tus Master PIN
During the first 5 minutes after (re)placing the batteries, the default Master PIN (12345) can be used, along with the Master PIN that the user has chosen. Create a new Master PIN code following the steps in 2.2. A factory reset, as described in step 2.8, will permanently return the Master PIN to the default value 12345.

FUNCTIONING OF VOLTA

ENTER A CORRECT PIN CODE

• Enter a PIN code (min. 4 – max. 8 digits)
• Nias [#] kom paub meej
• A light sequence runs from the bottom to the top across the keypad, indicating that a correct code has been entered

ENTER A WRONG CODE

• Sau tus PIN tsis raug
• Nias [#] kom paub meej
• All LEDs flash twice, indicating a wrong code has been entered
• If 5 or more wrong codes are entered consecutively, you won’t be able to use the Volta for a certain period due to safety reasons.
• The time-out period is specified as follows:
  • 2 [tus naj npawb ntawm kev sim ua tsis tiav] vib nas this
  • Rau example: 6 failed attempts result in a time-out period of 64 seconds (26 seconds)

The time-out period is reset when a correct code is entered, or if no new code is entered during 2 hours

LOW Battery WARNING
Thaum cov roj teeb pib khiav tawm, qhov taw qhia roj teeb qis ntawm lub keyboard yuav pib flashing thaum nkag mus rau tus lej, qhia tias lub sijhawm tau los hloov cov roj teeb.

Hloov cov roj teeb

• Remove the Volta from the gate
• Qhib lub hau roj teeb
• Hloov lub pob roj teeb
• Kaw lub roj teeb hau
• Mount the Volta module back on the gate

Kev kho mob

• Ntxuav lub vaj tsev thiab tso saib siv ib daim ntaub mos, moistened nrog ib tug nruab nrab tu neeg sawv cev.
• Tsis txhob siv roj lossis tshuaj rau ntawm lub cuab yeej vim lawv tuaj yeem ua mob rau lub tsev.

Cov ntaub ntawv dav dav

• Please observe the local regulations on the deposit of packaging material and of appliances no longer in use. Our packaging material is eco-friendly. It can be divided into 2 materials: cardboard (box) and expandable polyester (buffer)
• Koj lub cuab yeej yog ua los ntawm cov khoom siv rov ua dua tshiab

WARRANTYA
2-year warranty covers all electronics.

• Tsoom Fwv Teb Chaws Trade Commission txoj cai txwv tsis pub xa email tsis xav tau kev lag luam rau cov khoos phis tawj.
• A discarded device can either be returned to your dealer or sent back to ADG. This product’s recycling fee is € 0,2.
• The WEEE marking on the product indicates that it may not be thrown away together with normal household waste and must be handed over to a designated collection point for the recycling of electrical and electronic waste.
• As the manufacturer of this product, we guarantee that we have taken all the necessary steps to comply with the current safety requirements for this product.

www.adg.ie

FAQs