Phau Ntawv Qhia Siv Linkvil (Fanvil) W712 RoIP Gateway

1. Taw qhia

The Linkvil (Fanvil) W712 is a Radio over IP (RoIP) gateway designed to bridge analog/digital two-way radio systems with SIP communication devices. This device integrates a 400-470MHz radio module and a SIP module, facilitating interconnected communication across various platforms.

The W712 is compact, portable, and compatible with mainstream analog and DMR II digital two-way radios, including Motorola and Hytera. It supports easy deployment and management, enabling the creation of a unified communication system without requiring extensive changes to existing infrastructure. This gateway is suitable for internal communication in diverse environments such as community security, industrial parks, supermarkets, hospitality, and campus security.

Cov yam ntxwv tseem ceeb:

• Integrated 400-470 MHz radio module for connecting analog/DMR II digital radios.
• SIP protocol compatibility for connecting SIP communication devices.
• High compatibility with Motorola, Hytera, and other mainstream analog/digital radios.
• Supports HD audio with G.722 and Opus codecs.
• Includes USB 2.0 and TF card interfaces for data storage or offline firmware upgrades.
• Supports call recording and call logs for both two-way radios and SIP phones.
• Dual Megabit Ethernet ports for network transmission.
• Power supply via DC 12V PSU and Power over Ethernet (PoE+).
• Web-based management interface for device configuration.
• Supports both desktop and wall-mounted installation.

2. Cov ntsiab lus ntawm pob

Thov xyuas kom meej tias txhua yam khoom muaj nyob hauv pob:

• Linkvil (Fanvil) W712 RoIP Gateway Unit
• Lub hwj chim Adapter (DC 12V)
• Kav hlau txais xov
• Ethernet Cable
• Daim ntawv qhia kev txhim kho ceev

Note: The "Included Components" specification states "not apply", which is likely an error or refers to additional accessories not bundled. The above list is based on typical gateway packages.

3. Lub cev dhauview

Familiarize yourself with the ports and indicators on the W712 gateway.

Daim duab 1: Pem hauv ntej view of the Linkvil W712 RoIP Gateway. Shows the device with its antenna attached, displaying the "LINKVIL" logo and indicator lights for PWR (Power), SIP, RADIO, and a RESET button.

Daim duab 2: Angled view of the Linkvil W712 RoIP Gateway. This perspective highlights the compact design and the side ventilation, along with the front panel indicators.

Daim duab 3: Lwm angled view of the Linkvil W712 RoIP Gateway, providing a slightly different perspective of the device's form factor and antenna placement.

Pem hauv ntej vaj huam sib luag Indicators:

• PWR (Power): Qhia qhov xwm txheej ntawm lub zog.
• SIP: Indicates SIP module status and activity.
• RADIO: Indicates radio module status and activity.
• RESET: Button to reset the device to factory defaults (press and hold).

Rear Panel Ports (Typical):

• DC 12V fais fab tuag: Rau txuas lub hwj chim adapter.
• Ethernet Ports (LAN/WAN): Dual Megabit Ethernet ports for network connection.
• USB 2.0 Chaw nres nkoj: For data storage or other peripherals.
• TF Daim npav qhov: For TF card insertion, used for data storage or offline firmware upgrades.
• Antenna Connector: For attaching the external antenna.

4. Kev teeb tsa thiab kev teeb tsa

4.1. Kev teeb tsa lub cev

1. Mounting: The W712 supports both desktop and wall-mounted installation. Choose a stable location with good ventilation and away from direct heat sources or moisture. For wall mounting, use appropriate screws and anchors (not included) to secure the device.
2. Txuas Antenna: Carefully screw the provided antenna onto the antenna connector on the rear panel of the W712. Ensure it is securely fastened but do not overtighten.
3. Kev sib txuas fais fab:
   • Siv fais fab adapter: Connect the DC 12V power adapter to the power input port on the W712, then plug the adapter into a standard electrical outlet.
   • Siv PoE +: If your network switch supports PoE+, connect an Ethernet cable from the PoE+ enabled port on your switch to one of the Ethernet ports on the W712. The device will power on automatically.
4. Kev sib txuas Network: Connect an Ethernet cable from your network router or switch to one of the Ethernet ports on the W712. The device features dual Megabit Ethernet ports.
5. Insert TF Card (Optional): If you plan to use a TF card for data storage or offline firmware upgrades, insert it into the TF card slot.
6. Connect USB Device (Optional): If needed, connect a USB device to the USB 2.0 port.

4.2. Kev Nkag Mus Rau Kev Teeb Tsa Thawj Zaug

Once powered on and connected to the network, the W712 can be configured via its web tswj interface.

1. Tau txais IP Chaw Nyob: The W712 will typically obtain an IP address automatically via DHCP. You may need to check your router's DHCP client list to find the assigned IP address of the device. Alternatively, use a network scanning tool.
2. Nkag mus Web Interface: Qhib a web browser on a computer connected to the same network as the W712. Enter the device's IP address into the browser's address bar and press Enter.
3. Nkag mus: You will be prompted for a username and password. Refer to the Quick Installation Guide for default login credentials. It is highly recommended to change the default password immediately after the first login for security purposes.

5. Cov lus qhia ua haujlwm

The W712 gateway functions by integrating radio communication with SIP-based communication. Configuration is primarily done through the web tswj interface.

5.1. Radio Module Configuration

Hauv lub web interface, navigate to the radio settings to configure the 400-470MHz radio module. This includes:

• Kev teeb tsa zaus: Set the operating frequencies for communication with two-way radios.
• Channel Configuration: Define radio channels and associated parameters.
• Compatibility Settings: Adjust settings for compatibility with specific analog or DMR II digital radio models (e.g., Motorola, Hytera).
• Suab Settings: Configure audio input/output levels for the radio interface.

5.2. SIP Module Configuration

Access the SIP settings in the web interface to integrate the W712 with your SIP communication system:

• SIP Account Register: Register the W712 with your SIP server by entering SIP account details (username, password, server address).
• Codec Preferences: Select preferred audio codecs, including G.722 and Opus for HD audio.
• Network Settings: Configure network parameters relevant to SIP communication (e.g., NAT traversal).

5.3. RoIP Link Configuration

This section defines how radio channels are mapped to SIP extensions or groups, enabling cross-platform communication.

• Mapping Rules: Create rules to link specific radio channels to SIP endpoints or vice versa.
• Group Calls: Configure group call functionalities between radio users and SIP users.
• Kev nqis peev tseem ceeb: Assign priorities for different communication paths if necessary.

5.4. Call Recording and Logs

The W712 supports recording calls and maintaining call logs for both two-way radios and SIP phones. These features can be configured and accessed via the web interface. Ensure sufficient storage is available on the TF card or connected USB device if local storage is used for recordings.

6. Kev tu

6.1. Hloov kho firmware

Regularly check the manufacturer's website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. The W712 supports offline firmware upgrades via the TF card interface.

6.2. Kev ntxuav

Keep the device clean by wiping it with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.

6.3. Rov pib dua mus rau qhov qub ntawm lub Hoobkas

If the device is not functioning correctly or you need to clear all configurations, you can perform a factory reset. Locate the RESET button on the front panel. With the device powered on, press and hold the RESET button for approximately 5-10 seconds until the indicator lights change, then release. The device will restart with factory default settings.

7. Kev daws teeb meem

This section addresses common issues you might encounter with the W712 RoIP Gateway.

7.1. No Power Indicator

• Tshawb xyuas Kev Txuas Hluav Taws Xob: Ensure the DC 12V power adapter is securely connected to the device and a working power outlet.
• Check PoE+ (if applicable): Verify that the Ethernet cable is connected to a PoE+ enabled port on your switch and that the switch is providing power.
• Test Power Adapter: If possible, test the power adapter with another compatible device or use a multimeter to check its output.

7.2. Tsis tuaj yeem nkag mus Web Interface

• Kev sib txuas Network: Ensure the Ethernet cable is properly connected to both the W712 and your network. Check the network status indicators on the device and your switch.
• IP Chaw Nyob: Verify that you are using the correct IP address for the W712. Check your router's DHCP client list.
• Network Configuration: Ensure your computer is on the same network segment as the W712. Temporarily disable any firewalls on your computer that might be blocking access.
• Hoobkas pib dua: If all else fails, perform a factory reset to revert to default network settings, then try accessing again.

7.3. Radio Communication Issues

• Kav hlau txais xov: Ensure the antenna is securely attached and positioned correctly.
• Kev teeb tsa zaus: Double-check that the radio module's frequency and channel settings in the web interface match those of your two-way radios.
• Compatibility: Verify that the W712's settings are configured for compatibility with your specific radio models (analog/DMR II).
• RADIO Indicator: Observe the RADIO indicator light for activity.

7.4. SIP Communication Issues

• SIP Registration: Confirm that the SIP account is successfully registered with your SIP server. Check the SIP status in the web interface.
• Kev sib txuas Network: Ensure stable network connectivity to the SIP server.
• SIP Settings: Verify all SIP account details, server addresses, and codec preferences are correctly configured.
• SIP Indicator: Observe the SIP indicator light for activity.

8. Cov lus qhia tshwj xeeb

9. Warranty thiab Support

For warranty information and technical support, please refer to the official Fanvil (Linkvil) weblub vas sab lossis tiv tauj koj tus neeg muag khoom uas tau tso cai. Khaws koj daim ntawv txais nyiaj yuav khoom ua pov thawj ntawm kev yuav khoom rau kev thov warranty.

Online resources, including FAQs, updated manuals, and firmware downloads, may be available on the manufacturer's support portal.