Inficon D-TEK Pro Refrigerant Leak Detector User Manual

4.1 Kev them nyiaj yug ntaus ntawv

The D-TEK Pro is powered by a rechargeable battery. Before first use, fully charge the device.

1. Connect the provided charging cable to the charging port on the D-TEK Pro.
2. Plug the other end of the charging cable into a suitable power source.
3. The charging indicator on the device will illuminate. Allow sufficient time for a full charge.

4.2 Attaching the Phone Holder

The included phone holder allows for convenient mobile device integration.

1. Locate the attachment point for the phone holder on the D-TEK Pro.
2. Securely attach the phone holder according to its design.
3. Place your mobile device into the holder, ensuring it is stable.

5.1 Hwj chim Rau/Tawm

• Txhawm rau qhib lub hwj chim, nias thiab tuav lub hwj huam khawm kom txog thaum lub teeb pom kev.
• Txhawm rau tua hluav taws, nias thiab tuav lub hwj huam khawm kom txog thaum lub cuab yeej kaw.

5.2 Using Pro Mode for Leak Detection

The D-TEK Pro features an all-in-one Pro Mode that combines cloud hunting and pinpointing capabilities, allowing for efficient leak location.

1. Ensure the device is powered on and in Pro Mode (refer to the display for mode indication).
2. Move the sensor probe slowly around suspected leak areas. The device's superior airflow allows for detection from a greater distance.
3. The D-TEK Pro will indicate the presence of refrigerants with high sensitivity, detecting down to 0.1 ppm.
4. Follow the increasing readings to pinpoint the exact leak source.

Figure 1: The Inficon D-TEK Pro being used to inspect a refrigeration unit. The display shows a 0.0 ppm reading, indicating no refrigerant detected at the current location. The device is held by a user's hand, demonstrating its portability and ease of use in an industrial setting.

5.3 Refrigerant Compatibility

The D-TEK Pro is designed to detect a wide range of refrigerants, including:

• Cov tshuaj Chlorofluorocarbons (CFCs)
• HCFCs (Hydrochlorofluorocarbons)
• Cov pa roj hydrofluorocarbons (HFCs)
• Cov HFOs (Hydrofluoroolefins)
• Blends including A2Ls

5.4 Mobile App Integration

Download the D-TEK Pro mobile app to enhance your leak detection workflow.

• Customer Reports: Generate detailed reports with photos and ppm tracking.
• GPS mus txog qhovtwg: Confirm job location with integrated GPS functionality.

Figure 2: The Inficon D-TEK Pro connected to a smartphone, showcasing the mobile application's interface. This setup allows users to view real-time leak detection data, generate reports, and utilize GPS tracking for job site verification.

6.1 Kev saib xyuas dav dav thiab tu

To ensure optimal performance and longevity of your D-TEK Pro:

• So lub cuab yeej nrog lub mos, damp daim ntaub. Tsis txhob siv cov tshuaj abrasive los yog cov kuab tshuaj.
• Keep the sensor probe clean and free from debris.
• Store the device in its soft case when not in use to protect it from dust and physical damage.

6.2 Lim Hloov

The D-TEK Pro is designed for low maintenance, requiring no purging and no charcoal filters. However, spare filters are provided for specific applications or if the existing filter becomes visibly soiled or damaged.

1. Locate the filter housing on the device.
2. Carefully remove the old filter.
3. Insert a new spare filter, ensuring it is seated correctly.