myFirstech FTI-STK1 Kev Pabcuam Tsheb thiab Kev Npaj Sau

Specifications

• Khoom npe: TSI-STK1
• Cov Tsheb Pab Them: Subaru Forester STD KEY AT (Canada) 2019-2024
• Yuav tsum tau Accessories: BLADE-AL-SUB9 firmware, WebTxuas Hub, ACC RFID1
• Hom Connector: 40-Pin BCM

Cov lus qhia siv khoom

• CAN kev twb kev txuas:
  • Hom 2 CAN kev sib txuas yog tsim los ntawm 40-pin BCM connector. Txuas tus dawb 2-pin poj niam connector rau tus txiv neej dub 2-pin connector ntawm marker [D] ntawm daim duab.
• Immobilizer kev twb kev txuas:
  • Hom B IMMO yuav tsum tau txuas cov dub thiab dawb 2-pin connectors ntawm marker [C] ntawm cov duab.
• Lub teeb Wiring:
  • FTI-STK1 harness pre-wires nres teeb. Hloov cov hlau ntsuab / dawb ntawm CM I / O connector nrog lub sam xauv nees lub pre-terminated ntsuab / dawb hlau.
• ACC-RFID1 Installation:
  • Rau SUB9 firmware, ACC-RFID1 yuav tsum muaj rau kev pib ua haujlwm deb vim nws tsis muab cov ntaub ntawv immobilizer. Nruab ACC-RFID1 ua ntej programming BLADE module rau lub tsheb.
• 2nd START tso zis:
  • FTI-STK1 harness muaj xws li ib tug pre-wired liab / dub 2nd pib tso zis. Yog tias tsis xav tau nyob rau hauv HOM 2, txiav thiab insulate cov xaim muab los tiv thaiv luv luv thaum tsis siv.
• I/O Hloov:
  • Tsis tas yuav hloov pauv rau I/O kev sib txuas.
• Cov Lus Qhia Ntxiv:
  • Program ACC-RFID1 ua ntej programming BLADE module.
  • Ruaj ntseg tag nrho 2-pin kev sib txuas rau lub cev tseem ceeb, txawm siv los yog tsis siv.

FAQs

• Q: Dab tsi yog Module LED flashing RED cov lej qhia thaum lub sijhawm ua haujlwm?
  • A:
    • 1 x RED = Tsis tuaj yeem sib txuas lus nrog RFID lossis cov ntaub ntawv immobilizer.
    • 2 x RED = Tsis muaj CAN ua haujlwm. Tshawb xyuas CAN xaim txuas.
    • 3 x RED = Tsis pom qhov hluav taws kub. Txheeb xyuas qhov hluav taws xob hluav taws xob txuas thiab CAN.
    • 4 x RED = Yuav tsum tau ignition output diode tsis kuaj.

PRODUCT INFORMATION

• Lub tsheb npog siv BLADE-AL-SUB9 firmware thiab cov khoom siv hauv qab no, WebTxuas Hub & ACC RFID1. Flash lub module, thiab hloov kho cov maub los firmware. Thov ua raws li cov lus qhia rau RFID programming ua ntej sim ua qhov kev pab cuam BLADE module rau lub tsheb.
• PAB: Hom 2 CAN kev sib txuas yog tsim los siv 40-Pin BCM connector thiab yuav tsum tau txuas cov dawb 2-pin poj niam connector rau dub txiv neej 2-pin connector ntawm marker [D] ntawm cov duab.
• Immobilizer: Hom B IMMO yuav tsum tau txuas cov dub thiab dawb 2-pin connectors ntawm marker [C] ntawm cov duab.
• Teeb: FTI-STK1 harness pre-wires nres teeb. Hloov cov hlau ntsuab / dawb ntawm CM I / O connector nrog lub sam xauv nees lub pre-terminated ntsuab / dawb hlau.
• ACC-RFID1 (Yuav tsum muaj): SUB9 firmware tsis muab cov ntaub ntawv immobilizer, ACC-RFID1 yog li xav tau rau kev pib ua haujlwm deb
• 2nd START: FTI-STK1 harness yog pre-wired nrog ib tug liab / dub 2nd pib tso zis (tsis yuav tsum tau nyob rau hauv HOM 2), txiav thiab insulate lub muab hlau los tiv thaiv luv luv circuits thaum tsis siv.
• I/O Hloov: Tsis xav tau
• Tswv yim 1: Program ACC-RFID1 ua ntej sim ua qhov kev pab cuam BLADE module rau lub tsheb.
• Tswv yim 2: Ruaj ntseg tag nrho cov kev sib txuas 2-pin, ob qho tib si siv thiab tsis siv, rau lub cev tseem ceeb.
• FTI-STK1: Installation thiab Configuration Notes
• A. YUAV TSUM TAU TXAIS
• B. ADAPTER TSIS TAU
• C. TSEEM CEEB (HOM B IMMO)
• D. YUAV TSUM TAU TXAIS
• E. TSIS TXAUS SIAB

NTAUB NTAWV COVERAGE

IMMOBILIZER DATA

ARM OEM tswb

DISARM OEM tswb

XOV TOOJ

XOV XWM TSHIAB

PRIORITY TSHIAB

TRUNK/HATCH

TAM SIM NO

TSEEM CEEB

TRUNK STATUS

BRAKE STATUS

E-BRAKE STATUS

A/M ALRM tswj

A/M RS CONTROL

LUB CTRL

• FT-DAS Yuav tsum tau siv rau kev sib kis.
• Ob leeg Liab & Liab / Dawb yuav tsum tau txuas nrog lub siab tam sim no daim ntawv thov.

CM900AS / 900S Jumper

• Pib ACC IGN1

Kev qhia ua ke

LED Programming yuam kev Codes

Module LED flashing RED thaum lub sijhawm ua haujlwm

• 1 x RED = Tsis tuaj yeem sib txuas lus nrog RFID lossis cov ntaub ntawv immobilizer.
• 2 x RED = Tsis muaj CAN ua haujlwm. Tshawb xyuas CAN xaim txuas.
• 3 x RED = Tsis pom qhov hluav taws kub. Txheeb xyuas qhov hluav taws xob hluav taws xob txuas thiab CAN.
• 4 x RED = Yuav tsum tau ignition output diode tsis kuaj.

CARTRIDGE INSTALATION

1. Xaub lub cartridge rau hauv chav tsev. Pom lub pob hauv qab LED.
2. Npaj rau Module Programming Procedure.

MODULE PROGRAMMING PROCEDURE

1. Rau lub installation no, lub Weblink HUB yog yuav tsum tau.
2. Tshem OEM yuam sij 1 ntawm lub keychain.
   • Muab tag nrho lwm cov keyfobs tsawg kawg yog 1 ko taw deb ntawm qhov Weblink HUB. Tsis ua raws li yuav ua rau muaj kev puas tsuaj rau lwm cov keyfobs lossis cuam tshuam nrog cov txheej txheem nyeem keyfob.
3. Flash lub module siv lub Weblink HUB. Ua raws li cov lus qhia on-screen kom ua tiav cov txheej txheem nyeem keyfob.
4. CEEB TOOM: Tsis txhob nias lub module programming khawm. Txuas lub zog ua ntej. Txuas module rau lub tsheb.
5. Siv tus yuam sij OEM 1, tig tus yuam sij rau txoj haujlwm ON.
6. Tos, LED yuav tig xim xiav rau 2 vib nas this.
7. Tig tus yuam sij rau OFF txoj haujlwm.
8. Module Programming txheej txheem ua tiav.

WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2020

Cov ntaub ntawv / Cov ntaub ntawv

	myFirstech FTI-STK1 Kev Pabcuam Tsheb thiab Kev Npaj Sau [ua pdf] Phau ntawv qhia FTI-STK1-Subaru Forester STD KEY AT-Canada_19-24_ENX, FTI-STK1 Tsheb Kev Pabcuam thiab Kev Npaj, FTI-STK1, Kev Pabcuam Tsheb thiab Kev Npaj, Kev Pabcuam thiab Kev Npaj, Sau Ntawv Npaj, Sau Ntawv
	myFirstech FTI-STK1 Kev Pabcuam Tsheb thiab Kev Npaj Sau [ua pdf] Phau ntawv qhia DL-SUB9, CM7000-7200, CM-X, FTI-STK1 Tsheb Kev Pabcuam thiab Kev Npaj, FTI-STK1, Kev Pabcuam Tsheb thiab Kev Npaj, Kev Pabcuam thiab Kev Npaj, Sau Ntawv Npaj, Sau ntawv
	FIRSTECH FTI-STK1 Kev Pov Hwm Tsheb thiab Kev Npaj [ua pdf] Daim ntawv qhia kev teeb tsa FTI-STK1 Kev Pabcuam Tsheb thiab Kev Npaj, FTI-STK1, Kev Pabcuam Tsheb thiab Kev Npaj, Kev Pabcuam thiab Kev Npaj

Cov ntaub ntawv

• Cov neeg siv phau ntawv