OBSBOT Tiny Smart Remote Controller User Manual

OBSBOT-Tiny-Smart-Remote-Controller-feature

OBSBOT-LOGO

OBSBOT Tiny Ntse Chaw Taws Teeb Tswj

OBSBOT-Tiny-Smart-Remote-Controller-fig-1

Cov ntaub ntawv khoom

OBSBOT Tiny Smart Remote Controller yog ib qho khoom siv uas tso cai rau koj los tswj lub koob yees duab OBSBOT Tiny 2. Nws muaj ntau yam haujlwm xws li qhib / tawm lub koob yees duab, xaiv cov cuab yeej presets, tswj lub gimbal, zooming hauv thiab tawm, tig rau / tawm tib neeg taug qab, thiab tes taug qab. Cov chaw taws teeb tswj yuav tsum muaj 2 AAA roj teeb ua haujlwm, thiab nws los nrog USB receiver uas yuav tsum tau ntsaws rau hauv koj lub computer. Koj tuaj yeem txuas OBSBOT Tiny 2 rau koj lub computer thiab ua kom lub chaw taws teeb tswj kev ua haujlwm hauv OBSBOT WebCam software.

Cov lus qhia siv khoom

  1. Kauj ruam 1: Nruab 2 AAA roj teeb raws li qhov zoo thiab qhov tsis zoo.
  2. Kauj ruam 2: Txuas USB receiver rau hauv koj lub computer.
  3. Kauj ruam 3: Txuas OBSBOT Tiny 2 rau koj lub computer.
  4. Kauj ruam 4: Qhib OBSBOT WebCam software thiab pab kom [Remote Controller] hauv qhov chaw software.
  5. Txhawm rau qhib / tawm OBSBOT Tiny 2 lub koob yees duab, nias lub pob ON/OFF (2).
  6. Txhawm rau xaiv cov khoom siv presets (1/2/3/4), nias lub pob sib txuas (3).
  7. Txhawm rau tswj lub gimbal, siv Gimbal Control khawm (5 thiab 6) txhawm rau txav lub koob yees duab nce, nqis, sab laug, sab xis, lossis rov pib dua mus rau qhov chaw pib.
  8. Siv cov khawm Zoom (7 thiab 8) kom zoom hauv thiab tawm.
  9. Txhawm rau qhib / tawm kev taug qab tib neeg, siv lub pob Taug qab (9).
  10. Txhawm rau qhib / tawm ob qho tib si taug qab tib neeg thiab nws pib zoom ib txhij, siv lub khawm kaw (10).
  11. Txhawm rau qhib / tawm tes taug qab, siv Tes khawm (11).
  12. Siv lub khawm Laser-Whiteboard (12) los pab kom lub laser.
    Nco tseg uas ua rau lub chaw taws teeb tswj chaw taws teeb hauv OBSBOT WebCam tuaj yeem ua rau qee tus yuam sij ntawm koj lub khoos phis tawj keyboard ua haujlwm tsis raug, uas yog qhov xwm txheej ib txwm muaj. Tsis tas li ntawd, xyuas kom meej tias muaj qhov tsawg kawg nkaus ntawm 0cm ntawm lub tshuab hluav taws xob thiab koj lub cev thaum ua haujlwm ntawm lub cuab yeej.

KHOOM PLIGVIEW

OBSBOT-Tiny-Smart-Remote-Controller-fig-2

  1. Qhov taw qhia xwm txheej.
  2. 【ON/OFF】 Tig on/off OBSBOT Tiny 2.
  3. 【Xaiv Ntaus】 1/2/3/4.
  4. 【Preset Position】 P1/P2/P3.
  5. 【Gimbal Control】 nce / nqis / sab laug / sab xis.
  6. 【Gimbal Control】 Rov pib dua mus rau qhov chaw pib.
  7. 【Zoom】 Zoom hauv.
  8. 【Zoom】 Zoom tawm.
  9. 【Track】 Tig on/off Human Tracking (Disable Auto-zoom by default).
  10. 【Close-up】 Tig on/off Human Tracking thiab Auto-zoom ib txhij.
  11. 【 Tes】 Tig on/off Hand Tracking.
  12. 【Laser-Whiteboard】Tuav kom pab tau lub laser, thiab ob-nias los ua lossis tawm ntawm Whiteboard Close-up.
    * Ceeb toom: Lub laser tsis tuaj yeem irradiate lub qhov muag, nws yuav ua rau lub qhov muag puas.
  13. 【Desk Mode】Qhib / tawm ntawm lub rooj hom.
  14. 【Hyperlink】 Nyem xaiv lub hyperlink, ob-nias rau qhib lub hyperlink, thiab ntev nias hloov ntawm qhib qhov rais.
  15. 【PageUp】 Nyem mus rau nplooj ntawv, thiab ntev nias kom ua tiav lossis tawm puv npo.
  16. [PageDown] Nyem mus rau nplooj ntawv hauv qab, thiab ntev nias kom ua tiav lossis tawm ntawm lub vijtsam dub.
  17. USB Receiver
    (Muab tso rau sab nraum qab ntawm cov chaw taws teeb tswj).

Ua ntej koj siv

  • Kauj ruam 1: Thov nruab 2pcs AAA roj teeb raws li qhov zoo thiab qhov tsis zoo.
  • Kauj ruam 2: Txuas USB receiver rau hauv koj lub computer.
  • Kauj ruam 3: Txuas OBSBOT Tiny 2 rau koj lub computer.
  • Kauj ruam 4: Qhib OBSBOT WebCam software, pab
    [Remote Controller] hauv qhov chaw software.
    * Nco tseg: Tig rau qhov chaw tswj chaw taws teeb hauv OBSBOT WebCam tuaj yeem ua rau qee tus yuam sij ntawm koj lub khoos phis tawj keyboard ua haujlwm tsis raug, qhov no yog qhov xwm txheej ib txwm muaj.

Cov ntaub ntawv / Cov ntaub ntawv

PDF thumbnailMe me Smart Chaw taws teeb Controller
User Manual · 2ASMC-ORB2209, 2ASMCORB2209, orb2209, Tiny Smart Remote Controller, Smart Remote Controller, Remote Controller, Controller

Cov ntaub ntawv

Published: April 16, 2023

Lus nug thiab lus teb

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Answered questions

Why does the OBSBOT Tiny Smart Remote Controller stop working when the Tiny2 Lite is connected via a UVC to NDI adapter?

Based on the OBSBOT Tiny Smart Remote Controller manual, the remote relies on a USB Receiver (stored on the back of the remote) that must be plugged directly into the computer, and the OBSBOT...

Read full answer

Lus nug & Lus teb

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. I can’t get the Tiny smart remote 2 to work with tiny2 Lite and UVC to NDI adapter.
    It’s connected according to the manuel,
    If the Tiny2 Lite is connected directly to the computer the remote works
    When connected with NDI Adapter stops woorking

    🇨🇦 Denis Vienneau asks I can't get the Tiny smart remote 2 to work with tiny2 Lite and UVC to NDI adapter.
    It's connected according to the manuel,
    If the Tiny2 Lite is connected directly to the computer the remote works
    When connected with NDI Adapter stops woorking
    Manuals+ clarified question
    Lus nug

    Why does the OBSBOT Tiny Smart Remote Controller stop working when the Tiny2 Lite is connected via a UVC to NDI adapter?

    Teb

    Based on the OBSBOT Tiny Smart Remote Controller manual, the remote relies on a USB Receiver (stored on the back of the remote) that must be plugged directly into the computer, and the OBSBOT WebCam software must be running with the [Remote Controller] setting enabled.

    When you use a UVC to NDI adapter, the camera's data stream is converted to a network signal, which often bypasses the direct USB HID (Human Interface Device) communication required by the OBSBOT software to translate remote commands to the camera. To troubleshoot this, please check the following:

    • USB Receiver Placement: Ensure the USB Receiver is plugged into the computer running the OBSBOT WebCam software, not into the NDI adapter itself.
    • Kev sib txuas Software: The OBSBOT WebCam software must still "see" the camera as a connected device to pass remote commands to it. Most NDI setups treat the camera as a network source rather than a local USB device, which may prevent the software from controlling the camera via the remote.
    • Compatibility: The manual specifies that the remote is designed for a direct connection (Step 2: Plug receiver into computer; Step 3: Connect Tiny 2 to computer). Using an NDI bridge often breaks the control path required for the Smart Remote.

    If you must use NDI, you may need to use the OBSBOT software's virtual camera or NDI control features if available, though the physical Smart Remote is primarily designed for local USB configurations.

    Read the full Q&A page

    Teb

Nug ib lo lus nug

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

OBSBOT 638952 Tiny 3 Lite Powered Spatial Audio 4K Webcam neeg siv phau ntawv
Lub Plaub Hlis 18, 2026
OBSBOT Tiny 3 Lite Remote Combo User Manual
Peb Hlis 19, 2026
OBSBOT PW106,Tiny 3 AI Powered Spatial Audio Webcam neeg siv phau ntawv
Lub Ob Hlis 6, 2026
OBSBOT Tail 2 Powered PTZR 4K Live Producti User Manual
Lub Kaum Hli 30, 2025