Ntiaj chaw LN501 Lora Node Controller Tus neeg siv phau ntawv

Cov neeg siv phau ntawv
LoRa Node Controller

LN 501

LN501 Lora Node Controller

Copyright
Copyright (C) 2023 PLANET Technology Corp. All rights reserved.
Cov khoom lag luam thiab cov kev pab cuam uas tau piav qhia hauv Phau Ntawv Qhia Tus Neeg Siv no yog cov khoom muaj ntawv tso cai ntawm PLANET Technology, Cov Neeg Siv Khoom Siv Phau Ntawv no muaj cov ntaub ntawv ntiag tug tiv thaiv los ntawm kev cai lij choj, thiab Tus Neeg Siv phau ntawv no thiab tag nrho cov khoom siv kho vajtse, software, thiab cov ntaub ntawv muaj cai.
Tsis muaj ib feem ntawm tus neeg siv phau ntawv no yuav raug theej, luam tawm, luam tawm, txhais, lossis txo rau ib qho hluav taws xob nruab nrab lossis tshuab nyeem tau los ntawm ib qho twg, hluav taws xob lossis tshuab suav nrog kev luam tawm, kaw, lossis cov ntaub ntawv khaws cia thiab khaws cov tshuab, rau lwm yam. tshaj tus neeg yuav khoom siv tus kheej, thiab tsis muaj kev tso cai sau ua ntej ntawm PLANET Technology.

Tsis lees paub
PLANET Technology tsis lav tias cov khoom siv yuav ua haujlwm zoo hauv txhua qhov chaw thiab kev siv, thiab tsis muaj kev lees paub thiab kev sawv cev, tsis hais los yog qhia, hais txog qhov zoo, kev ua tau zoo, kev ua lag luam, lossis kev nyab xeeb rau ib lub hom phiaj tshwj xeeb.
PLANET tau ua txhua yam los xyuas kom meej tias tus neeg siv phau ntawv no yog qhov tseeb; PLANET tsis lees paub qhov kev lav phib xaub rau qhov tsis raug lossis kev tso tseg uas yuav tshwm sim. Cov ntaub ntawv hauv Phau Ntawv Qhia Tus Neeg Siv no yuav raug hloov pauv yam tsis muaj ntawv ceeb toom thiab tsis sawv cev rau kev cog lus ntawm PLANET.
PLANET tsis muaj lub luag haujlwm rau qhov tsis raug uas yuav muaj nyob rau hauv Phau Ntawv Qhia Tus Neeg Siv.
PLANET tsis muaj kev cog lus los hloov kho lossis khaws cov ntaub ntawv tam sim no hauv Tus Neeg Siv Phau Ntawv no, thiab muaj txoj cai los txhim kho thiab / lossis hloov pauv rau Tus Neeg Siv phau ntawv no txhua lub sijhawm yam tsis muaj ntawv ceeb toom.
Yog tias koj pom cov ntaub ntawv hauv phau ntawv no uas tsis raug, ua yuam kev, lossis tsis tiav, peb yuav txaus siab rau koj cov lus thiab cov lus qhia.

FCC Daim Ntawv Qhia Ua Raws Cai
Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class A cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC cov cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tuaj yeem ua kom lub zog ntawm lub zog ntawm lub xov tooj cua thiab, yog tias tsis tau teeb tsa thiab siv raws li cov lus qhia, yuav ua rau muaj teeb meem cuam tshuam rau kev sib txuas lus hauv xov tooj cua.
Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov khoom siv thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
• Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

CE cim ceeb toom
Qhov no yog ib qho khoom siv hauv chav kawm A, Hauv ib puag ncig hauv tsev, cov khoom no tuaj yeem ua rau muaj kev cuam tshuam hauv xov tooj cua, nyob rau hauv rooj plaub uas tus neeg siv yuav tsum tau ntsuas kom txaus.

WEEE
Txhawm rau zam kom tsis txhob muaj qhov cuam tshuam rau ib puag ncig thiab tib neeg kev noj qab haus huv vim tias muaj cov khoom phom sij hauv cov khoom siv hluav taws xob thiab hluav taws xob, cov neeg siv khoom siv hluav taws xob thiab cov khoom siv hluav taws xob kawg yuav tsum nkag siab lub ntsiab lus ntawm crossedout wheeled bin cim. Tsis txhob muab WEEE pov tseg raws li cov pov tseg hauv nroog tsis raug thiab yuav tsum tau sau cov WEEE cais.

Cov cim lag luam
Lub logo PLANET yog lub cim lag luam ntawm PLANET Technology. Cov ntaub ntawv no tuaj yeem xa mus rau ntau yam khoom siv kho vajtse thiab software los ntawm lawv cov npe lag luam. Feem ntau, yog tias tsis yog txhua qhov xwm txheej, cov npe no tau lees tias yog cov cim lag luam lossis cov npe lag luam los ntawm lawv cov tuam txhab.
Kev kho dua
Tus neeg siv phau ntawv ntawm PLANET LoRa Node Controller
Qauv: LN501
Rev.: 2.0 (Lub Kaum Ob Hlis, 2023)
Tshooj No. EM-LN501_v2.0

Tshooj 1. Khoom Taw Qhia

Ua tsaug rau kev yuav khoomasing PLANET LoRa Node Controller, LN501. The descriptions of these models are as follows:

LN 501

Sab nraum zoov IP67 LoRa Node Controller nrog Hnub Ci Vaj Huam Sib Luag

"LN501" hais nyob rau hauv phau ntawv qhia yog hais txog cov qauv saum toj no.

1.1 Ntim Cov Ntsiab Lus
Lub pob yuav tsum muaj cov hauv qab no:

LN 501

• LoRa Node Controller x 1
• Kev taw qhia kev teeb tsa ceev x 1
• Data Cables x 2
• Mounting Bracket x 1
• Phab ntsa Mounting khoom siv x 1
• Lub cev Clampsx2 ua
• 2550 mAh roj teeb x 2

Yog tias ib qho ntawm cov khoom saum toj no ploj lawm, thov hu rau koj tus neeg muag khoom tam sim ntawd.

1.2 Tshajview
Feature-nplua nuj Sensor Hub rau Txuas Sensors
PLANET LN501 yog ib qho sab nraum zoov LoRa node maub los siv rau cov ntaub ntawv tau los ntawm ntau lub sensors. Nws muaj qhov sib txawv I / O interfaces xws li analog inputs, digital inputs, digital outputs, serial ports thiab lwm yam kom yooj yim rau kev xa tawm thiab hloov LoRaWAN tes hauj lwm. Lub LN501 tuaj yeem tsim tau yooj yim thiab nrawm los ntawm NFC lossis wired USB chaw nres nkoj. Rau kev siv sab nraum zoov, nws muab lub hnub ci los yog lub roj teeb built-in thiab nruab nrog IP67-rated enclosure thiab M12 connectors los tiv thaiv nws tus kheej los ntawm dej thiab hmoov av nyob rau hauv ib puag ncig hnyav.
LoRaWAN-raws li Controller nrog nplua nuj Industrial Interfaces
Lub LN501 yog LoRaWAN tau tshaj thiab yog nrog ntau yam kev lag luam txuas nrog rau txhua hom sensors, ntsuas thiab lwm yam khoom siv. Nws kuj tseem txuas cov ntaub ntawv Modbus ntawm serial thiab Ethernet network ntawm LoRaWAN. LN501 txhawb nqa LoRaWAN chav kawm A thiab C raws tu qauv kom muaj kev sib raug zoo nrog cov qauv LoRaWAN rooj vag suav nrog PLANET LCG-300 series.

• TSI RS232
• TSI RS485
• GPIO
• Cov Lus Qhia Kev Koom Tes
• SDI-12

Lub LN501 yog qhov zoo tagnrho rau kev xa tawm loj hauv IoT daim ntawv thov, xws li tej yaam num rau lub tsev automation, ntse metering, HVAC system, thiab lwm yam. Nrog rau ntau yam interfaces, PLANET LN501 zoo kawg nkaus pab retrofit legacy cuab tam rau hauv IoT enablement.

1.3 Nta
Cov yam ntxwv tseem ceeb
LN 501

• Ib qho yooj yim mus cuag nrog ntau yam wired sensors los ntawm GPIO / AI / RS232 / RS485 / SDI-12 interfaces
• Ntev kis tau tus mob mus txog 11km nrog kab pom
• Waterproof tsim nrog IP67 rooj plaub thiab M12 connectors
• Solar powered thiab built-in roj teeb (yeem)
• Kev ceev wireless configuration ntawm NFC
• Ua raws li tus qauv LoRaWAN gateways thiab network servers

1.4 Khoom Specifications

Khoom	LN 501
Wireless Kev sib kis
Technology	LoRaWAN
Kav hlau txais xov	Lub kav hlau txais xov sab hauv
Ntau zaus	LN501-868M: IN865, EU868, RU864 LN501-915M: US915, AU915, KR920, AS923
Tx Power	16dBm (868) / 20dBm (915)
rhiab heev	-137dBm @300bps
Hom haujlwm	OTAA/ABP Class A, Class C
Cov ntaub ntawv interface
Hom interface	M12 A-Code Txiv neej
IO	Chaw nres nkoj	2 × PIB
	Logical Level	Tsawg: 0 ~ 0.9V, Siab: 2.5 ~ 3.3V
	Qhov siab tshaj tam sim no	20 mA
	Hom haujlwm	Digital input, digital output, mem tes txee
Serial Chaw nres nkoj	Chaw nres nkoj	1 × RS232 lossis RS485 (Switchable)
	Baud Rate	1200-115200 bps
	raws tu qauv	Pob tshab (RS232), Modbus RTU (RS485)
Cov Lus Qhia Kev Koom Tes	Chaw nres nkoj	2 × Analog tswv yim
	Kev daws teeb meem	12bit ib
	Input Range	4 ~ 20mA lossis 0 ~ 10V (Switchable)
SDI-12	Chaw nres nkoj	1 × SDI-12
	raws tu qauv	SDI-12 V1.4
Fais fab tso zis	Chaw nres nkoj	2 × 3.3 V, 2 × 5/9 / 12 V (Switchable)
	Lub Sijhawm Hwjchim Ua Ntej Sau Cov Ntaub Ntawv	0 ~ 10 feeb
Kev ua haujlwm
Hwj chim On & Off	NFC, khawm fais fab (Internal)
Kev teeb tsa	PC software (ntawm USB hom C lossis NFC)
Cov yam ntxwv ntawm lub cev
Ua haujlwm kub	-20 ° C rau + 60 ° C
Kev tiv thaiv Ingress	IP67
Qhov ntev	116 × 116 × 45.5 mm

Fais fab Connector	1 × M12 A-coded Txiv neej Interface
Fais fab mov	Hnub ci zog + 2 x 2550mAh roj teeb thaub qab + 5-24 VDC
Kev teeb tsa	Desktop lossis phab ntsa mounting
Standards Conformance
Txoj Cai Ua Raws Cai	CE, FCC

Tshooj 2. Kev Taw Qhia Hardware

2.1 Cov lus piav qhia lub cev

DIP Hloov:

Interface	DIP Hloov
Fais fab tso zis
Cov Lus Qhia Kev Koom Tes
TSI RS485

1. Thov tua lub cuab yeej ua ntej hloov pauv cov tswv yim analog lossis lub zog tso tawm ntawm DIP hloov.
2. Analog inputs yog teem rau 4-20mA los ntawm lub neej ntawd, lub hwj chim outputs yog teem rau 12V los ntawm lub neej ntawd.
3. Fais fab tso zis ntawm interface 1 yog siv rau powering analog li, lub hwj chim tso zis ntawm interface 2 yog siv rau powering serial chaw nres nkoj pab kiag li lawm thiab SDI-12 li.

Lub zog khawm:

Muaj nuj nqi	Kev ua	LED qhia
Qhib	Nias thiab tuav lub pob kom ntau tshaj 3s.	Tawm → On
Tua tawm	Nias thiab tuav lub pob kom ntau tshaj 3s.	On → Off
Rov pib dua	Nias thiab tuav lub pob kom ntau tshaj 10s.	Blinks.
Tshawb xyuas On/Off Status	Nias lub hwj huam khawm ceev.	Lub teeb On: Ntaus tau qhib. Lub Teeb Tawm: Ntaus tau kaw.

Cov Ntaub Ntawv Sib Txuas:
Data Interface 1

Pin	Kev piav qhia
1
2	3.3V tawm, max. 100 mA
3	GND
4	Analog tswv yim 1
5	Analog tswv yim 2
6*	5-24V DC XNUMXV DC

* Thaum ob qho tib si DC sab nraud fais fab thiab roj teeb txuas nrog, lub zog sab nraud yuav yog qhov kev xaiv fais fab xav tau.

Data Interface 2

Pin	Kev piav qhia
1
2	3.3V tawm, max. 100 mA
3	GND
4	GPIO 1
5	GPIO 2
6	RS232(Tx) / RS485(A)
7	RS232 (Rx) / RS485 (B)
8	SDI-12

2.2 Hardware Installation
Xa mus rau cov lus piav qhia thiab ua raws cov kauj ruam yooj yim hauv qab no txhawm rau txhim kho koj LoRa Node sai.
2.2.1 Phab ntsa Mounting
Xyuas kom tseeb tias koj muaj phab ntsa mounting bracket, bracket mounting screws, phab ntsa plugs, phab ntsa mounting screws thiab lwm yam cuab yeej yuav tsum tau.
Kauj ruam 1: Kos rau plaub qhov ntawm phab ntsa koj nyiam tso lub cuab yeej thiab tho cov cim plaub qhov rau phab ntsa plugs (anchors). Tom qab ntawd muab lub mounting bracket hla lub qhov nrog cov phab ntsa ntsaws sab hauv, thiab ceev nws nrog screws.
Kauj ruam 2: Muab cov cuab yeej tso rau ntawm lub mounting bracket thiab muab cov ntsia hlau me me rau hauv lub qhov uas pom nyob hauv qab ntawm lub cuab yeej thiab tom qab ntawd muab cov ntsia hlau nruj kom tiav txoj haujlwm.

2.2.2 Ncej Mounting
Kauj ruam 1: Ncaj tawm clamp thiab xaub nws los ntawm lub voj voog nyob rau hauv lub mounting bracket, thiab qhwv lub clamp nyob ib ncig ntawm tus ncej. Tom qab ntawd siv lub hau ntswj kom nruj lub clamp los ntawm tig nws clockwise.
Kauj ruam 2: Muab cov cuab yeej tso rau ntawm lub mounting bracket thiab muab cov ntsia hlau me me rau hauv lub qhov uas pom nyob hauv qab ntawm lub cuab yeej thiab tom qab ntawd muab cov ntsia hlau nruj kom tiav txoj haujlwm.

Thov xyuas kom tseeb tias cov screws yog nruj nreem kaw.

Tshooj 3. Kev Npaj

Ua ntej nkag mus rau LoRa node controllers, tus neeg siv yuav tsum tau nruab cov cuab yeej siv hluav taws xob rau kev ua haujlwm.

3.1 Kev xav tau

• Cov chaw ua haujlwm khiav Windows 10/11
• Hom C USB cable rau LN501

3.2 Tswj LoRa Node

1. Rub tawm ToolBox software los ntawm Planet web qhov chaw.
2. https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword=LN501&view=6#list
3. Fais fab ntawm LoRa Node ntaus ntawv thiab txuas mus rau lub computer ntawm micro USB chaw nres nkoj.
4. Qhib ToolBox thiab xaiv "Hom" thiab tom qab ntawd "General", thiab tom qab ntawd nyem lo lus zais nkag rau hauv ToolBox. (Default password: 123456)

Tshooj 4. Kev Tswj Xyuas Kev Ua Haujlwm

Tshooj lus no qhia txog kev ua haujlwm ntawm LoRa node maub los.

4.1 Tswj LoRa Node

1. Rub tawm ToolBox software los ntawm Planet web qhov chaw.
2. https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword=LN501&view=6#list
3. Fais fab ntawm LoRa Node ntaus ntawv thiab txuas mus rau lub computer ntawm micro USB chaw nres nkoj.
4. Qhib ToolBox thiab xaiv "Hom" thiab tom qab ntawd "General", thiab tom qab ntawd nyem lo lus zais nkag rau hauv ToolBox. (Default password: 123456)
5. Tom qab nkag mus rau hauv ToolBox, koj tuaj yeem nyem "Power On" lossis "Power Off" kom qhib / tawm ntaus ntawv thiab hloov lwm qhov chaw.

4.2 LoRaWAN kev teeb tsa
LoRaWAN teeb tsa yog siv rau kev teeb tsa cov kis tsis tau hauv LoRaWAN ® network.
Basic LoRaWAN Chaw:
Mus rau "LoRaWAN -> Basic" ntawm ToolBox software los teeb tsa hom koom, App EUI, App Key thiab lwm yam ntaub ntawv. Koj tseem tuaj yeem khaws txhua qhov chaw los ntawm lub neej ntawd.

Yam khoom	Kev piav qhia
Device EUI	Cim ID ntawm lub cuab yeej uas tuaj yeem pom ntawm daim ntawv lo.
App EUI	Default App EUI yog 24E124C0002A0001.
Daim ntawv thov Port	Qhov chaw nres nkoj yog siv los xa thiab txais cov ntaub ntawv; default port yog 85. Nco tseg: RS232 cov ntaub ntawv yuav raug xa los ntawm lwm qhov chaw nres nkoj.
Ua hauj lwm hom	Chav A thiab Chav C muaj nyob
LoRaWAN Version	V1.0.2, V1.0.3 muaj.

Koom Hom	OTAA thiab ABP hom muaj
Daim ntawv thov Key	Appkey rau OTAA hom; qub 5572404C696E6B4C6F52613230313823.
Ntaus Chaw Nyob	DevAddr rau ABP hom, lub neej ntawd yog 5th rau 12th tus lej ntawm SN.
Network Session Ntsiab	Nwkkey rau ABP hom, lub neej ntawd yog 5572404C696E6B4C6F52613230313823.
Daim ntawv thov Session Key	Appskey rau hom ABP, lub neej ntawd yog 5572404C696E6B4C6F52613230313823.
RX2 Cov ntaub ntawv tus nqi	RX2 cov ntaub ntawv tus nqi kom tau txais downlinks.
RX2 zaus	RX2 zaus kom tau txais downlinks. Unit: Hz
Spread Factor	Yog tias ADR tsis ua haujlwm, lub cuab yeej yuav xa cov ntaub ntawv los ntawm qhov sib kis no.
Hom kev lees paub	Yog tias lub cuab yeej tsis tau txais ACK pob ntawv los ntawm lub network server, nws yuav rov xa cov ntaub ntawv 3 zaug feem ntau.
Rov koom nrog hom	Kev ceeb toom ncua sij hawm ≤ 35 mins: lub cuab yeej yuav xa cov mounts tshwj xeeb ntawm LoRaMAC pob ntawv los xyuas cov xwm txheej kev sib txuas txhua 30 mins; Yog tias tsis teb tom qab cov pob ntawv tshwj xeeb, lub cuab yeej yuav rov tuaj koom. Kev ceeb toom ncua sij hawm> 35 mins: lub cuab yeej yuav xa cov mounts tshwj xeeb ntawm LoRaMAC pob ntawv txhua txhua los xyuas cov xwm txheej sib txuas txhua lub sijhawm qhia; Yog tias tsis teb tom qab cov pob ntawv tshwj xeeb, lub cuab yeej yuav rov tuaj koom.
Teem tus naj npawb ntawm pob ntawv xa tuaj	Thaum rov koom nrog hom qhib, teeb tsa tus lej ntawm LinkCheckReq packets xa. Nco tseg: tus lej xa tawm tiag yog Teem tus naj npawb ntawm pob ntawv xa + 1.
ADR hom	Tso cai rau lub network server los kho cov ntaub ntawv ntawm lub cuab yeej.
Tx Power	Tx zog ntawm lub cuab yeej.

LoRaWAN zaus chaw:
Mus rau "LoRaWAN -> Channel" ntawm ToolBox software xaiv cov zaus txhawb nqa thiab xaiv cov channel xa cov uplinks. Xyuas kom tseeb tias cov channel sib phim LoRaWAN rooj vag.

Yog tias zaus yog ib qho ntawm AU915 / US915, koj tuaj yeem nkag mus rau qhov ntsuas ntawm cov channel uas koj xav kom ua rau hauv lub thawv ntawv, ua rau lawv sib cais los ntawm commas.
Examples:
1, 40: Ua kom Channel 1 thiab Channel 40
1-40: Ua kom Channel 1 rau Channel 40
1-40, 60: Ua kom Channel 1 rau Channel 40 thiab Channel 60
Txhua yam: Ua kom txhua tus channel
Null: Qhia tias txhua qhov channel raug kaw

4.3 Kev teeb tsa interface
LN501 txhawb nqa cov ntaub ntawv sau los ntawm ntau qhov sib cuam tshuam nrog rau GPIOs, analog inputs thiab serial ports.
Tsis tas li ntawd, lawv tuaj yeem ua kom lub zog ntawm cov khoom siv davhlau ya nyob twg los ntawm lub zog tso zis interfaces. Cov txheej txheem yooj yim yog raws li hauv qab no:
Mus rau "General -> Basic" ntawm ToolBox software hloov lub sijhawm tshaj tawm.

Yam khoom	Kev piav qhia
Qhia Txog Lub Sij Hawm	Tshaj tawm ib ntus ntawm kev xa cov ntaub ntawv mus rau lub network server. Default: 20 mins, Ntau Yam: 10-64800 s. Nco tseg: RS232 kis tau tus mob yuav tsis ua raws li lub sij hawm qhia.
Kev sib sau	Lub sijhawm ntawm kev sau cov ntaub ntawv thaum muaj lus ceeb toom. (saib ntu 4.4) Lub sijhawm no yuav tsum tsis pub ntau tshaj li qhov qhia txog lub sijhawm.
Cov ntaub ntawv khaws cia	Disable los yog pab kom tshaj tawm cov ntaub ntawv khaws cia hauv zos. (saib ntu 4.5)
Cov ntaub ntawv Kev xa rov qab	Disable los yog pab kom cov ntaub ntawv retransmission. (saib ntu 4.6)
Ntaus ntawv Rov qab Cov Khoom Siv Hluav Taws Xob Xeev	Yog tias lub cuab yeej poob lub zog thiab rov qab mus rau lub zog, lub cuab yeej yuav qhib lossis tawm raws li qhov ntsuas no.
Hloov Password	Hloov tus password rau ToolBox software los nyeem / sau cov cuab yeej no.

4.3.1 RS485 Chaw

1. Txuas RS485 ntaus ntawv mus rau RS485 chaw nres nkoj ntawm interface 2. Yog hais tias koj xav tau LN501 rau lub hwj chim RS485 ntaus ntawv, thov txuas lub hwj chim cable ntawm RS485 ntaus ntawv mus rau 5V / 9V / 12V fais fab tso zis ntawm interface 2.
2. Mus rau "General -> Serial" ntawm ToolBox software los pab RS485 thiab teeb tsa cov chaw nres nkoj serial. Serial chaw nres nkoj yuav tsum zoo ib yam li RS485 cov khoom siv davhlau ya nyob twg.

Yam khoom	Kev piav qhia
Interface 2 (Pin 1) 5V / 9V / 12V	Pab kom 5V / 9V / 12V fais fab tso zis ntawm interface 2 los muab lub zog rau RS485 cov khoom siv davhlau ya nyob twg. Nws yog 12V los ntawm lub neej ntawd thiab koj tuaj yeem hloov DIP keyboards hloov voltage. Fais fab tso zis sij hawm ua ntej sau: fais fab mov lub sij hawm ua ntej sau cov ntaub ntawv rau lub davhlau ya nyob twg ntaus ntawv pib. Ntev: 0-600s. Fais fab mov tam sim no: muab tam sim no raws li sensor xav tau. Ntau yam: 0-60mA
Interface 2 (Pin 2) 3.3V tso zis	Pab kom 3.3V fais fab tso zis ntawm interface 2 los muab lub zog rau RS485 cov khoom siv davhlau ya nyob twg. Fais fab mov hom: Xaiv "Nruam fais fab mov" lossis "Configurable power supply time". Fais fab tso zis sij hawm ua ntej sau: fais fab mov lub sij hawm ua ntej sau cov ntaub ntawv rau lub davhlau ya nyob twg ntaus ntawv pib. Ntev: -600s. Fais fab mov tam sim no: muab tam sim no raws li sensor xav tau. Ntau yam: 0-60mA

Lub sij hawm tso zis hluav taws xob Ua ntej Sau	LN501 yuav siv zog rau RS485 cov khoom siv davhlau ya nyob twg rau lub sijhawm ua ntej sau cov ntaub ntawv rau lub davhlau ya nyob twg pib pib.
Baud Rate	1200/2400/4800/9600/19200/38400/57600/115200 are available.
Cov Ntaub Ntawv Ntsis	8 ntsis yog muaj.
Nres Ntsis	1 ntsis thiab 2 ntsis yog muaj.
Parity	Tsis muaj, khib thiab qhov cub muaj.
Execution Interval	Lub sijhawm ua haujlwm ntawm Modbus cov lus txib.
Max. Teb Sijhawm	Lub sij hawm teb siab tshaj plaws uas LN501 tos rau cov lus teb rau cov lus txib. Yog tias nws tsis tau txais cov lus teb tom qab lub sijhawm teb siab tshaj plaws, nws tau txiav txim siab tias cov lus txib tau tas sijhawm.
Max. Rov sim sij hawm	Teem lub sijhawm rov sim siab tshaj plaws tom qab ntaus ntawv tsis nyeem cov ntaub ntawv los ntawm RS485 cov khoom siv davhlau ya nyob twg.
Modbus RS485 Choj LoRaWAN	Yog tias hom pob tshab tau qhib, LN501 yuav hloov Modbus RTU cov lus txib los ntawm network server rau RS485 cov khoom siv davhlau ya nyob twg thiab xa Modbus teb thawj zaug rov qab mus rau lub network server. Chaw nres nkoj: Xaiv los ntawm 2-84, 86-223.

Thaum koj siv lub zog tso zis rau lub zog RS485 Modbus qhev cov cuab yeej, nws tsuas yog muab lub zog thaum qhia txog lub sijhawm. Nws tau pom zoo kom siv hluav taws xob ua qhev nrog lub zog sab nraud thaum lub sijhawm kuaj PoC.

3. Nyem ntxiv Modbus channels, thiab tom qab ntawd txuag kev teeb tsa.

Yam khoom	Kev piav qhia
Channel ID	Xaiv tus channel ID koj xav teeb tsa, 16 channel xaiv tau.
Lub npe	Kho lub npe los txheeb xyuas txhua Modbus channel.
qhev ID	Teem Modbus qhev ID ntawm lub davhlau ya nyob twg.
Chaw nyob	Qhov chaw nyob pib nyeem ntawv.
Ntau	Teem nyeem pes tsawg tus lej los ntawm qhov chaw nyob pib. Nws fixes rau 1.
Byte xaj	Teem lub Modbus cov ntaub ntawv nyeem kev txiav txim yog tias koj teeb tsa hom kev sau npe nkag lossis tuav npe. INT32/Float: ABCD, CDBA, BADC, DCBA INT16: AB, BA
Hom	Xaiv cov ntaub ntawv hom ntawm Modbus channels.
Kos npe	Tus zuam qhia tias tus nqi muaj ib qho ntxiv lossis rho tawm.
Nqa	Tom qab nias, lub cuab yeej yuav xa Modbus nyeem cov lus txib los sim yog tias nws tuaj yeem nyeem qhov tseeb.

Example: Yog tias koj teeb tsa nws raws li daim duab hauv qab no, LN501 yuav xa Modbus nyeem cov lus txib mus rau lub davhlau ya nyob twg tsis tu ncua: 01 03 00 00 00 01 84 0A

4. Rau ToolBox software, nyem "Fetch" los xyuas seb LN501 tuaj yeem nyeem cov ntaub ntawv raug los ntawm cov khoom siv davhlau ya nyob twg.
Koj tseem tuaj yeem nyem "Fetch" nyob rau sab saum toj ntawm daim ntawv teev npe kom nqa tag nrho cov ntaub ntawv channel.

Thov tsis txhob nyem "Fetch" ntau zaus vim lub sij hawm teb rau teb yog txawv rau txhua lub davhlau ya nyob twg.

4.3.2 RS232 Chaw

1. Txuas RS232 ntaus ntawv mus rau RS232 chaw nres nkoj ntawm interface 2. Yog tias koj xav tau LN501 los ua lub zog rau RS232 ntaus ntawv, txuas lub zog cable ntawm RS232 ntaus ntawv mus rau 5V / 9V / 12V fais fab tso zis ntawm interface 1.
2. Mus rau "General -> Serial" ntawm ToolBox software los pab RS232 thiab teeb tsa cov chaw nres nkoj serial.
   Serial chaw nres nkoj chaw yuav tsum zoo ib yam li RS232 davhlau ya nyob twg li.

Yam khoom	Kev piav qhia
Interface 2 (Pin 1) 5V / 9V / 12V	Pab kom 5V / 9V / 12V fais fab tso zis ntawm interface 2 los muab lub zog rau RS232 cov khoom siv davhlau ya nyob twg tsis tu ncua. Nco tseg: Fais fab tso zis yog 12V los ntawm lub neej ntawd thiab koj tuaj yeem hloov DIP keyboards hloov voltage.
Interface 2 (Pin 2) 3.3V Continuous Output	Pab kom 3.3V fais fab tso zis ntawm interface 2 los muab lub zog rau RS232 cov khoom siv davhlau ya nyob twg tsis tu ncua. Fais fab mov tam sim no: muab tam sim no raws li sensor xav tau. Ntau yam: 0-60mA
Baud Rate	1200/2400/4800/9600/19200/38400/57600/115200 are available.
Cov Ntaub Ntawv Ntsis	8 ntsis yog muaj.
Nres Ntsis	1 ntsis thiab 2 ntsis yog muaj.
Parity	Tsis muaj, khib thiab qhov cub muaj.
Chaw nres nkoj	Qhov chaw nres nkoj siv rau RS232 cov ntaub ntawv xa mus.

4.3.3 GPIO Chaw

1. Txuas cov khoom siv rau GPIO ports ntawm interface 2.
2. Mus rau "General -> GPIO" ntawm ToolBox software kom pab GPIO chaw nres nkoj.

3. Xaiv GPIO hom raws li koj xav tau.

• Digital Input: txheeb xyuas cov xwm txheej siab lossis qis ntawm cov khoom siv
• Digital Output: xa voltage teeb liab los ua cov khoom siv
• Counter: Pulse Counter.

Cov tswv yim digital:
Xaiv cov xwm txheej pib ntawm cov tswv yim digital. Yog tias rub tau raug xaiv, ntog ntug yuav tshwm sim; Yog tias rub down raug xaiv, nce ntug yuav tshwm sim. Tom qab xaiv, nyem "Fetch" txhawm rau txheeb xyuas cov xwm txheej tam sim no ntawm cov tswv yim digital.

Digital Output:
Nyem "Hloov" txhawm rau txheeb xyuas seb LN501 tuaj yeem ua rau cov khoom siv los ntawm cov zis digital lossis nyem "Fetch" txhawm rau txheeb xyuas cov xwm txheej tam sim no ntawm cov zis digital.

Yam khoom	Kev piav qhia
Cov tswv yim digital	Thawj xwm txheej ntawm txee. Pull Down: Nce 1 thaum pom ntug nce Pull Up / Tsis muaj: Nce 1 thaum pom ntug ntog
Cov Lim	Nws raug nquahu kom pab thaum lub sijhawm pulse ntau dua 250 peb.
Khaws tus nqi kawg thaum muaj zog Tawm	Khaws cov nqi suav thaum lub tshuab hluav taws xob tawm.
Pib / Nres	Ua kom lub cuab yeej pib / nres suav. Nco tseg: LN501 yuav xa cov suav tsis hloov pauv yog tias koj tsis nyem "Pib".
Hloov tshiab	Refresh kom tau txais cov nqi ntsuas zaum kawg.
Ntshiab	Suav tus nqi ntawm 0.

4.3.4 AI Chaw

1. Txuas analog ntaus ntawv mus rau analog input ports ntawm interface 1. Yog hais tias koj xav tau LN501 rau lub hwj chim analog ntaus ntawv, txuas lub hwj chim cable ntawm analog ntaus ntawv mus rau 5V / 9V / 12V fais fab tso zis ntawm interface 1.
2. Mus rau "General -> AI" ntawm ToolBox software kom pab tau cov tswv yim analog.
3. Xaiv hom analog input raws li hom khoom siv analog.
   Xyuas kom tseeb tias DIP hloov tau hloov ua ntej hloov "Analog Input Signal Type" rau 0-10V.
4.  Qhib "Interface 1 (Pin 1) 5V / 9V / 12V" thiab teeb tsa "Lub Sijhawm Tso Tawm Hluav Taws Xob Ua Ntej Sau", LN501 yuav siv zog rau cov khoom siv analog rau lub sijhawm ua ntej sau cov ntaub ntawv. Thaum koj siv lub zog tso zis rau lub zog analog khoom siv, nws tsuas yog muab lub zog thaum qhia txog lub sijhawm tuaj. Nws tau pom zoo kom siv hluav taws xob ua qhev nrog lub zog sab nraud thaum lub sijhawm kuaj PoC.
5. Nyem "Fetch" los xyuas seb LN501 tuaj yeem nyeem cov ntaub ntawv raug los ntawm cov khoom siv analog.

4.3.5 SDI-12 Chaw

1. Txuas SDI-12 sensor rau SDI-12 chaw nres nkoj ntawm interface 2. Yog hais tias lub SDI-12 ntaus ntawv yuav tsum tau lub hwj chim los ntawm lub LN501, txuas lub hwj chim cable ntawm SDI-12 ntaus ntawv mus rau lub hwj chim tso zis ntawm interface 2.
2. Rau ToolBox software, pab kom SDI-12 interface thiab teeb tsa kev teeb tsa interface kom zoo ib yam li cov ntawm SDI-12 sensors.
   

   Yam khoom	Kev piav qhia
   Interface 2 (Pin 1) 5V / 9V / 12V tso zis	Pab kom 5V / 9V / 12V fais fab tso zis ntawm interface 2 los muab lub zog rau SDI-12 sensors. Nws yog 12V los ntawm lub neej ntawd thiab koj tuaj yeem hloov DIP keyboards hloov voltage. Fais fab tso zis sij hawm ua ntej sau: Lub sijhawm siv hluav taws xob ua ntej sau cov ntaub ntawv rau lub davhlau ya nyob twg ntaus ntawv pib. Ntev: 0-600s. Fais fab mov tam sim no: muab tam sim no raws li sensor xav tau. Ntau yam: 0-60mA
   Baud Rate	1200/2400/4800/9600/19200/38400/57600/115200 are available.
   Cov Ntaub Ntawv Ntsis	8 ntsis / 7 ntsis yog muaj.
   Nres Ntsis	1 ntsis / 2 ntsis yog muaj.
   Parity	Tsis muaj, khib thiab qhov cub muaj.
   Max Retry Sijhawm	Teem lub sijhawm rov sim siab tshaj plaws tom qab ntaus ntawv tsis nyeem cov ntaub ntawv los ntawm SDI-12 sensors.
   SDI-12 choj LoRaWAN	Yog tias hom no tau qhib, lub network server tuaj yeem xa SDI-12 hais kom ua rau SDI-12 ntaus ntawv thiab lub cuab yeej tsuas tuaj yeem hnov ​​​​qab raws li cov lus txib hauv server. Chaw nres nkoj: Xaiv los ntawm 2-84, 86-223.

   Thaum koj siv lub zog tso zis rau lub zog SDI-12 sensors, nws tsuas yog muab lub zog thaum qhia txog lub sijhawm. Nws tau pom zoo rau lub zog sensors nrog lub zog sab nraud thaum lub sijhawm kuaj PoC.

3. Nyem ntxiv cov channel, nyem Nyeem kom tau qhov chaw nyob ntawm lub sensor no.
4. Nyem Dhau li ntawm SDI-12 Command tab ntxiv SDI-12 cov lus txib raws li qhov xav tau los ntawm lub sensor.
5. Nyem Sau kom xa cov lus txib kom tau txais cov ntaub ntawv sensor, tom qab ntawd nyem Fetch los xyuas cov ntaub ntawv.

Yam khoom	Kev piav qhia
Channel ID	Xaiv tus channel ID koj xav teeb tsa los ntawm 16 channels.
Lub npe	Kho lub npe ntawm txhua tus channel kom yooj yim txheeb xyuas lawv
Chaw nyob	Chaw nyob ntawm SDI-12 sensor, nws yog kho tau.
Nyeem	Nyem rau nyeem qhov chaw nyob ntawm SDI-12 sensor.
Sau	Hloov chaw nyob thiab nias sau qhov chaw nyob tshiab rau SDI-12 sensor.
SDI-12 Command	Sau cov lus txib xa mus rau sensors, ib qho channel tuaj yeem ntxiv 16 cov lus txib feem ntau.
Sau	Nyem rau xa cov lus txib kom tau txais cov ntaub ntawv sensor. Nco tseg: Tsis txhob nyem ntau zaus vim lub sij hawm teb los teb yog txawv rau txhua lub davhlau ya nyob twg.
Nqa	Fetch Nyem los tso saib cov ntaub ntawv ntawm ToolBox.
Tus nqi	Qhia tus nqi sau. Yog tias nws nyeem ntau tus nqi, nws yuav raug cais los ntawm "+" lossis "-".

4.4 Tswb Settings
LN501 txhawb kev teeb tsa cov lus txib kom xa cov ntawv ceeb toom rau lub network server. Txhua lub cuab yeej tuaj yeem ntxiv 16 qhov pib lub tswb ceeb toom ntawm feem ntau.

1. Rau ToolBox software, mus rau nplooj ntawv hais kom ua, nyem Kho kom raug ntxiv cov lus txib.
2. Teem ib qho IF mob nrog rau cov txiaj ntsig analog input lossis RS485 Modbus channel qhov tseem ceeb. Thaum tus nqi sib tw, lub cuab yeej yuav tshaj tawm lub tswb pob ntawv.
   Lub cuab yeej tsuas yog xa lub tswb ib zaug xwb. Tsuas yog thaum tus nqi rov qab mus rau qhov qub thiab ua rau tus mob rov qab, nws yuav xa lub tswb tshiab.
3. Tom qab teeb tsa tag nrho cov lus txib, nyem Txuag.

4.5 Cov ntaub ntawv khaws cia
LN501 txhawb nqa 600 cov ntaub ntawv khaws cia hauv zos thiab xa tawm cov ntaub ntawv ntawm ToolBox software. Lub cuab yeej yuav sau cov ntaub ntawv raws li lub sijhawm tshaj tawm txawm tias nws tsis txuas nrog lub network.

1. Mus rau xwm txheej ntawm ToolBox software los sync lub sijhawm ntaus ntawv;
2. Mus rau General> Basic ntawm ToolBox software los pab kom cov ntaub ntawv khaws cia.
3. Mus rau Maintenance> Thaub qab thiab Reset ntawm ToolBox software, nyem Export, ces xaiv cov ntaub ntawv lub sij hawm ntau thiab nias Txuag rau export cov ntaub ntawv.
4. Nyem Clear kom tshem tawm tag nrho cov ntaub ntawv khaws cia hauv lub cuab yeej yog tias tsim nyog.

4.6 Data Retransmission
LN501 txhawb nqa cov ntaub ntawv rov qab los xyuas kom meej tias lub network server tuaj yeem tau txais tag nrho cov ntaub ntawv txawm tias lub network poob rau qee lub sijhawm. Muaj ob txoj hauv kev kom tau txais cov ntaub ntawv ploj:

• Network server xa downlink commands mus nug cov ntaub ntawv keeb kwm rau lub sij hawm teev, saib LN501 Communication Protocol;
• Thaum lub network poob qis yog tias tsis muaj lus teb los ntawm LinkCheckReq MAC pob ntawv rau lub sijhawm, lub cuab yeej yuav kaw lub sijhawm sib txuas ntawm lub network thiab rov xa cov ntaub ntawv ploj tom qab lub cuab yeej rov txuas lub network.

Nov yog cov kauj ruam rau kev xa cov ntaub ntawv rov qab:

1. Ua kom cov ntaub ntawv khaws cia feature thiab cov ntaub ntawv xa rov qab feature.
2. Ua kom rejoin hom feature thiab teeb tsa tus naj npawb ntawm pob ntawv xa tuaj. Coj hauv qab no ua tus example, lub cuab yeej yuav xa LinkCheckReq MAC pob ntawv mus rau lub network server tsis tu ncua los xyuas seb lub network puas raug txiav; Yog tias tsis muaj lus teb rau 8 + 1 zaug, cov xwm txheej koom nrog yuav hloov mus rau qhov tsis ua haujlwm thiab lub cuab yeej yuav sau cov ntaub ntawv poob lub sijhawm (lub sijhawm los koom nrog lub network).
3. Tom qab lub network txuas rov qab, lub cuab yeej yuav xa cov ntaub ntawv ploj lawm, pib los ntawm lub sijhawm thaum cov ntaub ntawv ploj lawm, raws li lub sijhawm tshaj tawm.

1. Yog hais tias lub cuab yeej rebooted los yog powered tawm thaum lub sij hawm cov ntaub ntawv retransmission thiab cov txheej txheem tsis tiav, lub cuab yeej yuav rov xa tag nrho cov ntaub ntawv retransmitted dua tom qab reconnecting rau lub network.
2. Yog tias lub network raug txiav tawm dua thaum lub sijhawm xa cov ntaub ntawv rov qab, nws tsuas yog xa cov ntaub ntawv txiav tawm tshiab kawg nkaus xwb.
3. Cov ntaub ntawv xa rov qab yog pib nrog "20", thov xa mus rau LN501 Kev Sib Txuas Lus raws tu qauv.
4. Cov ntaub ntawv retransmission yuav ua rau kom cov uplinks thiab luv lub roj teeb lub neej.

4.7 Kev tu
4.7.1 Txhim Kho
Mus rau "Kev Kho -> Txhim Kho" ntawm ToolBox software, nyem "Xaiv" kom import firmware thiab hloov kho lub cuab yeej. Koj tuaj yeem nyem "Up to Date" txhawm rau tshawb nrhiav qhov tseeb firmware ntawm lub cuab yeej thiab hloov kho dua tshiab.

4.7.2 Thaub qab
LN501 pab kiag li lawm txhawb configuration thaub qab kom yooj yim thiab ceev ntaus configuration nyob rau hauv tej. Backup tsuas yog tso cai rau cov khoom siv nrog tib tus qauv thiab LoRa zaus band. Thov xaiv ib qho ntawm cov hauv qab no rau thaub qab ntaus ntawv:

1. Mus rau "Kev Kho -> Thaub qab thiab Pib dua", nyem "Export" kom txuag tau qhov kev teeb tsa tam sim no ua thaub qab file.
2. Nyem "Xaiv" xaiv thaub qab file, thiab tom qab ntawd nyem "Ntshuam" kom import cov kev teeb tsa.

4.7.3 Rov qab mus rau Hoobkas Default
Thov xaiv ib qho ntawm cov hauv qab no los pib dua ntaus ntawv:

• Kho vajtse: Qhib rooj plaub ntawm LN501 thiab tuav lub zog khawm rau ntau tshaj 10s.

• ToolBox Software: Mus rau "Kev Kho -> Thaub qab thiab Pib dua" nyem "Pib dua".