ReLeaf RESTORATIVE Basic Setup Kit Instruction Manual

ReLeaf RESTORATIVE Basic Setup Kit

Specifications

• Khoom siv: Mos, saj zawg zog thermoplastic elastomer
• 100% BPA thiab latex-dawb
• Npaj Siv: Cov txheej txheem kho hniav kho hniav

KEV PAB CUAM / INTENDED SIV

ReLeaf® Restorative yog ib qho txhais tes-dawb, ntim cov hniav nqus tsev uas pab cov kws kho mob nrog kev khiav tawm, cais tawm, thim rov qab, thiab tswj qhov chaw qhuav thaum lub sij hawm kev kho hniav, kho, thiab tu cev. ReLeaf® yog siv rau kev kho mob los ntawm cov kws kho hniav.
Lub qhov ncauj qhov ncauj muaj cov mos mos, hloov tau cov thermoplastic elastomer uas yog 100% BPA thiab latex-dawb. Tsis muaj teeb meem kev noj qab haus huv tau raug txheeb xyuas nrog kev siv cov khoom no.
ReLeaf® hoses muaj xws li cov roj hmab silicone (silicone thiab silicon dioxide).

INSTALLATION THIAB SIV SIV

1. Fold the two Leaf halves together by pushing together the small protruding knob into the opposing hole at the Restorative Leaf base. Insert the larger knob into the opposing hole at the Leaf tip. Squeeze the two halves of the Leaf together to ensure each side securely attaches to the other. Attach the Leaf to the Restorative Adapter on the Short Hose (8” Quick Disconnect Hose) with the smaller leaf face facing away from the hose. Ensure the Leaf is securely attached.
2. Insert the ReLeaf® Bite Block onto the peg closest to the Leaf on the Restorative Adapter. Making sure the concaved slope is in contact with the Restorative Leaf.
3. Attach the free end of the
   Short Hose to the Quick Disconnect Adapter on the Long Hose (48” HVE Attachment Hose). Insert the coupler at the other end of the Long Hose securely into an open HVE port. It may be necessary to wet the
   O- ring inside the unused port so the Adapter can slide in easily.
4. Place the ReLeaf® Bite Block on the opposing arch you are working on. While having the Leaf sweep in front of the tongue and wrap around the retromolar area to the opposing cheek side.
5. When transitioning between patients, a cleaned and sterilized Bite Block, Restorative Adapter, and Short Hose must be utilized before attaching a new Leaf.

CONTRAINDICATIONS
Tsis paub contraindications.

COV KEV CEEV FAJ

Risk of allergic reactions cannot be excluded for those predisposed to allergies.

STERILIZATION, DISPOSAL THIAB STORAGE

All gray and white components of the ReLeaf™ system are compatible with standard dental sterilization protocols. These parts can be: wiped with dental-approved disinfectant wipes or sprays, run through dental atomizer, processed through an ultrasonic bath, run through a thermal washer, and run through autoclave cycle per sterilization cycle table.

• Nplooj: Ib zaug siv, pov tseg
  Cov nplooj uas muab pov tseg yog siv rau ib leeg xwb. Vim qhov xwm txheej ntawm cov khoom siv thiab tsim cov nplooj, lawv yuav tsum tsis txhob ua kom tsis muaj menyuam thiab rov siv dua. Nplooj qhov ncauj yuav tsum tau muab pov tseg kom zoo nyob rau hauv ib qho chaw kho mob pov tseg thawv kom tsis txhob kis tau tus kab mob.
• Bite Block, Restorative Adapter and Short Hose
  100% Autoclavable and Reusable.
  Before placement in an ultrasonic cleaner, rinse the Bite Block, Restorative Adapter and Short Hose with water and brush both external and lumen surfaces with a soft bristle brush for the exterior surface and a soft bristle lumen brush or pipe cleaner for the interior surfaces. Place in an ultrasonic unit filled with enzymatic cleaner. (note: follow instructions with enzymatic cleaner for proper mixing, exposure time, etc., per manufacturer instructions). Rinse with water, place in an autoclavable pouch. Run product through a wrapped / pouched cycle in the autoclave.
• Long Hose, Quick Disconnect Adapter and HVE Adapter
  100% Autoclavable and Reusable.
  The Long Hose should stay connected to the HVE until ready for routine evacuation cleaning with an enzymatic evacuation cleaner. Running evacuation cleaners through the hose to clean out any debris at least once per week is recommended. It is not necessary to run evacuation cleaners through the hose between each patient. If running through the autoclave, follow instructions listed above for Bite Block, Restorative Adapter & Short Hose.

Cia
Thov xyuas kom Releaf® khaws cia hauv chav sov.
The Long Hose and Short Hose are designed to be held in the HVE Adapter when unused. (See image)

VALIDATED STERILIZATION CYCLES

Gravity Displacement Autoclave

• Kub: 121 ° C / 250 ° F
• MINIMUM EXPOSURE TIME: 30 feeb
• MINIMUM DRY TIME: 30 min

TXOJ KEV HLUB

Proper Releaf® Restorative Position
Ensure the long end of the Restorative Leaf wraps around the retromolar area on the quadrant you are working on. To assist in evacuation, when a small amount of water and saliva build up behind the Restorative Leaf, have the patient slowly push their tongue against the Leaf while closing down on the Bite Block.
This will evacuate any remaining water that flows behind the Leaf.

Loose kev twb kev txuas
If you find the coupler becoming loose, it may be necessary to replace the O-ring.

Releaf® yog ib lub cim lag luam ntawm Innovative Dental Technologies, Inc.
Yuav tsum tau muag los ntawm lossis raws li kev txiav txim ntawm tus kws kho hniav nkaus xwb.
Kev siv cov khoom siv no yog txwv tsis pub siv rau lwm lub hom phiaj tshaj li kev pom zoo los ntawm cov chaw tsim khoom.

Tsim los ntawm

INNOVATIVE PRODUCT BRANDS™
Innovative Product Brands Inc. TM

IPB, Inc

• 7045 Palm Avenue Highland, CA 92346, Tebchaws Asmeskas
• +1-909-864-7477
• www.ipbinc.com

FAQ