USAutomatic Low Current Receiver Installation Guide

USAutomatic Low Current Receiver

Ua tsaug rau koj xaiv cov khoom no.
Thov nyeem phau ntawv no ua tib zoo ua ntej txhim kho cov khoom no.

Taw qhia

• Cov khoom txais tam sim no qis 030205 yog 2 relay output receiver, ua haujlwm ntawm 433,92 Mhz hauv AM / ASK kev hloov pauv.
• Nws yog tsim rau tsis siv neeg kaw tshuab thiab anti-tub sab tub nyiag systems nrog ib tug heev tsawg so tam sim no noj.
• The operating frequency is among the European harmonised frequencies. The antenna is connected with a F- type connector.
• Lub relay outputs tsuas yog tsis muaj kev sib cuag nrog cov kev sib cuag luv luv rau hauv av.
• Kev khiav hauj lwm hom ntawm K1 yog Pulse thiab ntawm K2 tuaj yeem yog Pulse lossis Latch. Lub hwj chim yog 12 Vdc.
• Qib IP ntawm 2X tso cai rau kev teeb tsa sab hauv tsev nkaus xwb.
• Cov khoom no ua raws li EMC European Regulations (CE) thiab FCC Tshooj 15 Cov Cai.

Siv tau Transmitters

• 2-button transmitter – Part # 030210
• 4-button transmitter – Part # 030212

Technical specifications

• Tus txais hom: Superheterodyne.
• Demodulation: AM/ASK.
• Ua haujlwm zaus: 433,92 MHz.
• Lub zos oscillator zaus: 6,6128 MHz.
• Intermediate zaus: 10,7 MHz.
• rhiab heev (rau zoo teeb liab): -115 dBm.
• Input impedance: 75 Ohm
• Muab voltage: 12 dc ( ± 10% ).

Tam sim no nqus:

• Qhov siab: 1.5mA
• nrog 1 relay zoo siab: 7 mA
• Tus naj npawb ntawm relays: 2 (1NO, 1NO).
• Relay kev khiav hauj lwm hom Pulse / Latch
• Commutable max power: 24W or 24VA.
• Memory peev (tx yuam sij): 42.
• Operating temperature: -4 ÷ +158 °F.
• Qhov ntev: 4.13 x 1.77 x 1.1 nti
• Qhov hnyav: 2.29 oz
• IP tiv thaiv qib: 2X

Txais tshajview

• P1: P1 khawm
• P2: P2 khawm
• LD: Green Led
• CON: I/O Connector
• K1: Relay 1 tso zis
• F: F-hom connector
• K2: Relay 2 tso zis

Cov kab kos duab

Cov yam ntxwv tseem ceeb

• Tsawg heev so tam sim no noj
• 42 cov yuam sij transmitter khaws cia
• Ib qho tseem ceeb transmitter lossis Full memory erasure
• Programmable ua hauj lwm hom ntawm 2 relays: momentary, latching
• Ib qho yooj yim transmitter programming

PROGRAMMING TRANSMITTER THIAB RECEIVER

• The Transmitter and Receiver operate at 433 MHz. The receiver can store up to 22 unique transmitter codes.

Transmitter teeb:
(Nws raug pom zoo tias cov dipswitches raug hloov los ntawm qhov chaw pib)

1. Qhib lub roj teeb lub qhov rooj thiab nrhiav cov dipswitches.
2. Hloov cov dipswitches rau qhov chaw koj nyiam. Cov ntaub ntawv rau yav tom ntej siv.

Transmitter Sab laug khawm rau Receiver Programming:
(standard Qhib / Nres / Kaw muaj nuj nqi)

1. Press and hold the left transmitter button down. Red light on the transmitter should be on.
2. Ntawm lub receiver, thawb lub P1 laub khawm kom txog thaum lub teeb ntsuab LD los txog.
3. Tso ob lub nyees khawm. Transmitter laug khawm rau receiver programming tiav.

Transmitter Right Button rau Receiver Programming:
(Tuav- rooj vag-Qhib) (Tsuas yog tias nws pib kaw timer tau qhib)
The 2-channel receiver allows for programming the P2 relay from momentary mode (default) to latching mode. The transmitter right button can then be programmed to hold the gate open, overriding the auto-close feature, if activated.

1. Press and hold the right transmitter button down. Red light on the transmitter should be on.
2. Ntawm lub receiver, thawb lub P2 laub khawm kom txog thaum lub teeb ntsuab LD los txog.
3. Tso ob lub nyees khawm.
4. Transmitter txoj cai khawm rau receiver programming tiav.
5. Tam sim no koj yuav tsum teeb tsa receiver P2 rau latch hom nyob rau hauv cov kauj ruam hauv qab no.

Txais Programming:
Relay P2 programming los ntawm lub sijhawm mus rau latching hom (kom tuav lub rooj qhib)

1. Ntawm lub receiver, thawb lub P2 laub khawm kom txog thaum lub teeb ntsuab LD los txog, ces tso tawm. Lub teeb ntsuab LD yuav tsum nyob ruaj khov.
2. Thaum lub teeb ntsuab LD qhib, thawb lub P1 thawb-khawm cia thiab tso tawm. Ntsuab LD teeb yuav tsum flashing. Latch hom yog teem.

Txheeb xyuas Tus Txais P2 relay yog programmed rau latching hom:

1. Ntawm lub receiver, thawb lub P2 laub khawm kom txog thaum lub teeb ntsuab LD los txog, ces tso tawm.
2. Ntsuab LD teeb yuav tsum flashing. Yog tias lub teeb ntsuab LD ruaj khov, rov ua qhov Kev Txais Kev Pabcuam saum toj no.

Rov pib dua receiver P2 relay rau lub sijhawm tam sim no:

1. Ntawm lub receiver, thawb lub P2 laub khawm kom txog thaum lub teeb ntsuab LD los txog, ces tso tawm. Ntsuab LD teeb yuav tsum flashing.
2. Thaum lub teeb ntsuab LD qhib, thawb lub P1 thawb-khawm cia thiab tso tawm. Lub teeb ntsuab LD yuav tsum muaj zog. Momentary hom yog teem.

Erasing Single Transmitter from Receiver Memory:
Lub dipswitch chaw ntawm lub transmitter kom rho tawm yuav tsum paub.
Yog paub ua raws li cov kauj ruam hauv qab no.

1. Teem lub dipswitches hauv lub transmitter kom phim qhov hloov chaw ntawm lub transmitter code kom rho tawm.
2. Nias thiab tuav lub khawm sab laug transmitter.
3. Ntawm lub receiver thawb lub P1 laub khawm kom txog thaum lub teeb ntsuab LD los txog.
   Ces tso ob leeg.
4. Nias thiab tuav txoj cai transmitter khawm.
5. Ntawm lub receiver thawb lub P2 laub khawm kom txog thaum lub teeb ntsuab LD los txog.
   Ces tso ob leeg.
6. Tam sim no tus transmitter tau tshem tawm ntawm lub cim xeeb ntawm lub receiver.

Erasing all Transmitters from Receiver Memory:

1. Nias lub khawm P2 ntawm lub receiver kom txog thaum lub teeb ntsuab LD los txog. Ces tso P2 khawm.
2. Thaum lub teeb LD yog nias lub khawm P1 thiab P2 ib txhij thiab tuav kom txog thaum lub teeb ntsuab LD pib ntsais maj mam.
3. Nws yuav tsum ntsais 4 zaug ces tag nrho cov transmitter code yog erased.

TRANSMITER NUMBER DISPLAY

• Nws tuaj yeem tso saib pes tsawg tus yuam sij transmitter khaws cia hauv lub cim xeeb.
• Tus naj npawb yog tso tawm, hauv binary notation (0 lossis 1), los ntawm ib theem ntawm cov teeb ci.
• Lub flash luv (½ thib ob) ntawm LD muab binary "0".
• Lub flash ntev (1 thib ob) ntawm LD muab binary "1".
• Qhov ua tiav ib ntus yog tsim los ntawm 6 flashes thiab los ntawm qhov kawg flash ntev (2 vib nas this).
• Raws li nws txoj haujlwm, txhua lub flash muaj qhov sib txawv "qhov hnyav".

First flash: 2 = 1

1. Second flash: 2 = 2
2. Third flash: 2 = 4
3. Fourth flash: 2 = 8
4. Fifth flash: 2 = 16
5. Sixth flash: 2 = 32

Txheej txheem

1. Khaws P1 lossis P2 nias kom txog thaum LD hloov mus.
2. Tso lub khawm thiab ces thawb P2 ib pliag ua ntej LD hloov tawm.

Lub sijhawm no pib qhov sib lawv liag ntawm flashes.
Siv ib daim ntawv ntawm qhov sib lawv liag los xam tus lej lej sib raug, raws li qhia hauv qab no examples.

Es. N° 1: Memory empty

• Qhov hnyav 1 2 4 8 16 32 End Sequence
• Sequence: _ _ _ _ _ _ ____ ____
• Final number : 0 + 0 + 0 + 0 + 0 + 0 = 0

Es. N° 2: 5 transmitter keys

• Qhov hnyav 1 2 4 8 16 32 End Sequence
• Sequence: __ _ _ _ _ _ _ ____ ____
• Cov lej kawg: 1+ 0 + 4 + 0 + 0 + 0 = 5

Es. N° 3: 12 transmitter keys

• Qhov hnyav 1 2 4 8 16 32 End Sequence
• Sequence: _ _ _ _ _ _ _ _ ____ ____
• Cov lej kawg: 0 + 0 + 4 + 8 + 0 + 0 = 12

WARRANTY

• USAutomatic, LLC warrants this product to be free of defects in materials and workmanship for 1 YEAR. For a period of 1 YEAR following purchase, USAutomatic, LLC. will repair or replace the product free of charge, including parts, shop labor and return to customer shipping and handling.
• This 1-year warranty does not cover the plastic case from normal wear or damage due to misuse.
• To have the product sent for warranty consideration, it must be returned with the proof of purchase and a return authorization number. To obtain a return authorization number, please call 1-888-204-0174 for assistance. The return authorization number must be clearly marked on the outside of the return package or it may not be accepted.

Hu rau

• www.usautomaticgateopeners.com
• (888)-378-1170
• sales@usautomaticgateopeners.com